Catalog Searcher
Categories

Square Type 90° (90DV) 350X2.090DV

Model 350X2.090DV / 角タイプ 90°（90DV） / Iwata Seisakusho Co., Ltd. (Official website) / Listed on page 44 of the document

Iron square-type 90° hook used in the painting process. Length 350 mm, wire diameter 2.0 mm.

Last verified: (date the content was verified against the source document)

Square Type 90° (90DV) 350X2.090DV on page 44 of Iwata Seisakusho Co., Ltd. "塗装治具 ハンガー選定ガイドブック"
Source: Iwata Seisakusho Co., Ltd.「塗装治具 ハンガー選定ガイドブック」page 44
A reduced image of the relevant page is quoted from the document. Copyright belongs to Iwata Seisakusho Co., Ltd..Request removal

Specifications

Length L 350 mm
Wire diameter φ 2.0 mm
Material Iron
Quantity per pack (box) 1500 個
Price (Box) 68300 円
Pack part number 350X2.090DV-P
Quantity per pack (pack) 100 個
Price (Pack) 6100 円

角タイプ 90°（90DV） model comparison

Compare 19 models in the same series by specification.

Model Wire diameter φ Length L Material Quantity per pack (box) Price (Box) Pack part number Quantity per pack (pack) Price (Pack)
250X1.590DV 1.5 mm 250 mm Iron 2100 個 76700 円 250X1.590DV-P 100 個 4960 円
250X3.090DV 3.0 mm 250 mm Iron 700 個 28600 円 — — —
350X2.090DV This product 2.0 mm 350 mm Iron 1500 個 68300 円 350X2.090DV-P 100 個 6100 円
350X3.090DV 3.0 mm 350 mm Iron 900 個 41000 円 — — —
400X2.090DV 2.0 mm 400 mm Iron 1400 個 67800 円 400X2.090DV-P 100 個 6530 円
400X3.090DV 3.0 mm 400 mm Iron 800 個 42200 円 — — —
400X4.090DV 4.0 mm 400 mm Iron 500 個 28600 円 — — —
450X1.590DV 1.5 mm 450 mm Iron 2400 個 115300 円 450X1.590DV-P 100 個 6530 円
450X2.090DV 2.0 mm 450 mm Iron 1400 個 67800 円 450X2.090DV-P 100 個 6530 円
450X3.090DV 3.0 mm 450 mm Iron 900 個 47500 円 — — —
500X1.590DV 1.5 mm 500 mm Iron 2100 個 110600 円 500X1.590DV-P 100 個 7140 円
500X2.090DV 2.0 mm 500 mm Iron 1400 個 73700 円 500X2.090DV-P 100 個 7140 円
500X3.090DV 3.0 mm 500 mm Iron 800 個 45200 円 — — —
550X1.590DV 1.5 mm 550 mm Iron 2700 個 141500 円 550X1.590DV-P 100 個 7140 円
550X2.090DV 2.0 mm 550 mm Iron 1600 個 85600 円 550X2.090DV-P 100 個 7140 円
550X3.090DV 3.0 mm 550 mm Iron 1000 個 56400 円 550X3.090DV-P 100 個 7620 円
600X2.090DV 2.0 mm 600 mm Iron 1600 個 90300 円 600X2.090DV-P 100 個 7620 円
600X3.090DV 3.0 mm 600 mm Iron 800 個 49400 円 — — —
600X4.090DV 4.0 mm 600 mm Iron 600 個 38600 円 — — —

How to choose Hook

Points to check when selecting, with the values for this product (350X2.090DV).

  1. 1. Select wire diameter to suit workpiece weight

    This product: Wire diameter φ 2.0 mm

    Wire diameters in the listed products range from 1.5 to 4 mm. Thicker wire shows less deflection and elongation under load, allowing heavier workpieces to be supported stably. Thinner wire passes more easily through small parts and holes in workpieces and leaves smaller contact marks. Select based on both the workpiece weight and the diameter of the hole to be hooked.

  2. 2. Determine length according to hanging height

    This product: Length L 350 mm

    Length L in the listed products ranges from 250 to 600 mm. This dimension determines the distance from the conveyor to the workpiece and the hanging position inside the painting booth or drying oven. Check interference between workpieces and between workpieces and the floor or equipment, as well as the reach of spray guns and nozzles, and select a length that gives the required height on the line.

  3. 3. Match the suspension beam pitch

    Twin hooks are made to match the hole spacing of suspension beams, and the listed products support a 50 mm pitch. If the hole pitch of the beam in use does not match, the hook cannot be inserted or its fixing becomes unstable. Measure the beam dimensions on site and verify them before introduction.

  4. 4. Check hook width and hanging section shape

    Listed twin hooks include examples with a 30 mm hook width. The width of the hanging section, the square or R tip type, and the bend angle affect how the hook engages with workpiece holes or jigs and how resistant it is to slipping off. Select according to the shape of the hanging point on the workpiece.

  5. 5. Evaluate material for strength and swaying resistance

    This product: Material Iron

    The listed products are made of iron, and some twin hooks are made of spring steel. Spring steel has elasticity and resists deformation, so it suppresses swaying and suits repeated use. Confirm that the material can withstand the baking temperature and the stripping method used.

  6. 6. Account for paint buildup and replacement cycle

    Paint accumulates on hooks, causing reduced conductivity (poor adhesion during electrostatic painting) and dimensional changes. Decide operationally whether to strip and reuse hooks or replace them as disposables, and keep enough units on hand to match usage.

This guide was written by AI based on the listed products' documents and specification items.

About Hook and all products

FAQ

Q. What are the length and wire diameter of 350X2.090DV?
A. Length L is 350 mm and wire diameter φ is 2.0 mm.
Q. What are the material and application of the square-type 90° (90DV) 350X2.090DV?
A. The material is iron. It is an iron square-type 90° hook used in the painting process.
Q. In what quantities is 350X2.090DV sold?
A. Box packs contain 1500 pieces, and pack packs contain 100 pieces. The part number for the pack type is 350X2.090DV-P.

Written by AI based on the content of the source documents.

Source documents

More products from Iwata Seisakusho Co., Ltd.

See all →