DTR-T Type Slewing Ring Bearing (for Tunnel Boring Machines, Internal Gear)
DTR-T形 / JTEKT Corporation (Official website)
Internal gear slewing ring bearing with inner diameter of 1372 to 3996 mm. Three-row combined cylindrical roller structure designed for tunnel boring machines.
Last verified: (date the content was verified against the source document)
Specifications
| Inner diameter d | 1372〜3996 mm |
|---|---|
| Basic static load rating C0a | 11500〜90000 kN |
| Mass | 1050〜10500 kg |
| Gear Pressure Angle | 20 ° |
DTR-T形 model comparison
Compare 3 models in the same series by specification.
| Model | Inner diameter d | Basic static load rating C0a | Gear Pressure Angle | Mass |
|---|---|---|---|---|
| DTR-T形旋回座軸受（トンネル掘進機用・内歯） This product | 1372〜3996 mm | 11500〜90000 kN | 20 ° | 1050〜10500 kg |
| DTR-T形旋回座軸受（トンネル掘進機用・外歯） | 1055〜3450 mm | 15100〜200000 kN | 20 ° | 1370〜25600 kg |
| 旋回座軸受 DTR-T形（3列複合円筒ころタイプ・トンネル掘進機用） | — | — | — | — |
How to choose Slewing Ring Bearings
Points to check when selecting, with the values for this product (DTR-T Type Slewing Ring Bearing (for Tunnel Boring Machines, Internal Gear)).
-
1. Select a structure that suits load and moment
Single-row ball type is compact and suited to general construction machinery and cranes; three-row combined cylindrical roller type offers high rigidity and rated load for large cranes and tunnel boring machines; double-row tapered roller type can carry high axial load thanks to its large contact angle. Select the type based on the magnitude of moment load and impact.
-
2. Allow margin in static rated load
This product: Basic static load rating C0a 11500〜90000 kNBecause slewing bearings often operate at low speed or oscillate, the basic static rated load in the axial direction, C0a, is the primary selection criterion. Listed products range widely from 341 to 394000 kN. Convert maximum load and moment to equivalent load, and compare products with a safety factor appropriate to the application.
-
3. Match mounting diameter and support structure dimensions
This product: Inner diameter d 1372〜3996 mmBore diameter d and outside diameter D determine the mounting surface on the support structure or rotating body, the bolt hole layout, and the space for piping and cables passing through the center. Listed bore diameters range from a few mm to 6457 mm. For large-diameter products, a split design makes transport and assembly easier.
-
4. Confirm gear position and specifications
This product: Gear Pressure Angle 20 °Whether to choose ungeared, internal-tooth or external-tooth types depends on the layout of the drive pinion. Listed products have a pressure angle of 20°. Match the tooth profile (standard or low-profile teeth) and the JIS gear accuracy grade with the pinion side, and consider surface and root induction hardening as required.
-
5. Select sealing and lubrication method for the operating environment
In environments exposed to soil or water pressure, some products offer pressure-resistant seals with a static withstand pressure of 0.3 MPa in addition to labyrinth and dust seals. Check the presence of grease nipples and drain ports, and whether grease feeding, oil bath or forced circulation lubrication is used, in line with the maintenance plan.
-
6. Estimate handling and installation method from mass
This product: Mass 1050〜10500 kgListed products vary widely in mass, from 1 to 45800 kg. Large units are constrained by lifting equipment, crane capacity and transport dimensions, so verify the mass and, if necessary, consider circumferentially split designs (two-piece or four-piece).
This guide was written by AI based on the listed products' documents and specification items.
Description
Internal gear slewing ring bearing with a three-row combined cylindrical roller structure, designed for tunnel boring machines.
Features
- Three-row combined cylindrical roller structure
- With internal gear teeth
- Pressure angle 20°
Applications
- Tunnel boring machines
FAQ
- Q. What is the inner diameter range of the DTR-T Type Slewing Ring Bearing (for Tunnel Boring Machines, Internal Gear), and which machine is it intended for?
- A. The inner diameter is 1372 to 3996 mm. It is intended for tunnel boring machines.
- Q. What are the structure and gear specifications of the DTR-T Type Slewing Ring Bearing?
- A. It has a three-row combined cylindrical roller structure and internal gear teeth. The gear pressure angle is 20°.
- Q. What is the range of basic static load rating and mass of the DTR-T Type Slewing Ring Bearing?
- A. The basic static load rating C0a is 11500 to 90000 kN, and the mass is 1050 to 10500 kg.
Written by AI based on the content of the source documents.
Source documents
- Catalog 旋回座軸受
Similar products (other manufacturers)
Slewing Ring Bearings products, ordered by similarity of specifications and applications.
-
Spherical Roller Thrust Bearings
Spherical Roller Thrust Bearing Type E (292, 293, 294 series)
Self-aligning spherical roller thrust bearing that supports heavy unidirectional axial loads and heavy radial loads. Covers bore diameters of 60 to 170 mm.
SKF
-
Spherical Roller Thrust Bearings
Spherical Thrust Roller Bearings (29000 Series / 292, 293, 294 Series)
Dimension and load rating data for spherical thrust roller bearings with a wide bore range from 60 mm to 1600 mm. Includes SKF Explorer bearings.
SKF
-
Cylindrical Roller Bearings
RCC Bearing (Sealed Cylindrical Roller Bearing for Railway Vehicle Axle Boxes)
A sealed double-row cylindrical roller bearing unit for railway vehicle axle boxes. Seals at both ends and long-life grease enhance maintainability and reliability.
NSK
-
Needle roller bearings
Needle Roller Bearing with Cage
Needle roller bearing with a cage that guides the rollers. Small diameter with high load capacity, low friction, suitable for high-speed rotation. Also suitable for oscillating applications.
NTN Corporation
-
Needle roller bearings
Full Complement Drawn Cup Needle Roller Bearing
A needle roller bearing without a cage, with a large number of rollers to achieve high load capacity. Suitable for high-load, low-speed, and oscillating applications.
NTN Corporation
More products from JTEKT Corporation
See all →-
Slewing Ring Bearings
DTR…T Internal Gear Type Slewing Ring Bearing for Tunnel Boring Machines
Three-row combined cylindrical roller slewing ring bearing for supporting the main cutter of tunnel boring machines. Internal gear type, available in many sizes with outer diameters of 2 550 to 5 200 mm.
JTEKT Corporation
-
Slewing Ring Bearings
2TR… Internal Gear Type Slewing Ring Bearing for Tunnel Boring Machines
Double-row tapered roller slewing ring bearing for supporting the main cutter of tunnel boring machines. Features a large contact angle and high axial basic load rating.
JTEKT Corporation
-
Slewing Ring Bearings
Slewing Bearing for Swing Tower Support (DTR Type)
High-rigidity slewing bearing that accommodates radial, axial and moment loads. Sealing structure also prevents foreign matter ingress.
JTEKT Corporation
-
Slewing Ring Bearings
Slewing Ring Bearing TH Type (Single-Row Ball Type)
A compact single-row ball slewing ring bearing that simultaneously supports axial load, radial load and moment with one unit. Commonly used in general construction and material handling machinery.
JTEKT Corporation
-
Slewing Ring Bearings
Slewing Bearing DTR Type (Three-Row Combined Cylindrical Roller Type)
Slewing bearing with a three-row combined cylindrical roller structure, offering high rigidity and high load rating. Used in cranes, ship loaders, large rotating equipment, and similar applications.
JTEKT Corporation
-
Slewing Ring Bearings
Slewing Bearing DTR-T Type (Three-Row Combined Cylindrical Roller Type, for Tunnel Boring Machines)
A slewing bearing with enhanced shock resistance, high rated load capacity, and high sealing performance, designed to support the main cutter of tunnel boring machines.
JTEKT Corporation