Bearee™ MSS Miniature Resin Sliding Screw
MSS / NTN Corporation (Official website)
Low-noise miniature resin sliding screw combining an AS5000 nut with an SUS304 screw shaft. Nominal diameter 4–12 mm.
Last verified: (date the content was verified against the source document)
Specifications
| Nominal diameter | 4～12 mm |
|---|---|
| Lead | 1, 2, 1.5 and 3 times the nominal diameter mm |
Description
Low-noise sliding screw combining an AS5000 nut from Bearee with an SUS304 screw shaft, usable across a wide range of environments. Leads of 1 mm and 2 mm are standardized, along with 1.5 times and 3 times the nominal diameter.
Features
- Low noise
- Nominal diameter 4–12 mm
- 4 lead types
Applications
- Low-noise linear motion mechanisms
FAQ
- Q. What are the nominal diameter and lead types of the MSS Miniature Resin Sliding Screw?
- A. The nominal diameter is 4–12 mm. Leads are standardized at 1 mm and 2 mm, plus 1.5 times and 3 times the nominal diameter.
- Q. What materials are the nut and screw shaft of the MSS Miniature Resin Sliding Screw made of?
- A. The nut is made of AS5000 from Bearee, and the screw shaft is made of SUS304.
- Q. What applications is the MSS Miniature Resin Sliding Screw suited for?
- A. It is suited for low-noise linear motion mechanisms. It is a low-noise sliding screw combining an AS5000 nut from Bearee with an SUS304 screw shaft, usable across a wide range of environments.
Written by AI based on the content of the source documents.
Source documents
- Catalog エンジニアリング・プラスチック製しゅう動部品 ベアリー™ 26 pages
Similar products (other manufacturers)
Sliding screw products, ordered by similarity of specifications and applications.
-
Ball screw
Precision Ball Screw (TP/TS/TL Series)
Precision ball screw in which the screw shaft and nut make contact through balls. Grinding and integrated in-house production achieve high accuracy and reliability, with long service life and high transmission efficiency.
sanmi.co.jp
-
Ball screw
Rolled Ball Screw (RS/RM/RC/RK)
Rolled ball screws for transfer applications. Available in shaft, round nut, compact nut, and square nut types.
sanmi.co.jp
-
Ball screw
Tsubaki Nakashima Ball Screw
Precision ball screws in a wide range of types, including FB and CB series, high-load types, and miniature models.
Tsubaki Nakashima Co., Ltd.
-
Roller screw
Tsubaki Nakashima Precision Roller Screw
Precision roller screws of planetary and recirculating types.
Tsubaki Nakashima Co., Ltd.
More products from NTN Corporation
See all →-
Sliding screw
Bearee™ Resin Sliding Screw (Miniature Resin Sliding Screw R-MSS)
A low-noise feed screw combining a Bearee AS5000 resin nut with a stainless rolled screw shaft. Available in nominal diameters from 4 mm to 12 mm.
NTN Corporation
-
Bushings
Bearry™ ARE, AR, and ARF Type Sleeve Bearings
Resin sleeve bearings made with Bearry FL3000. ARE type has bore diameter 3 to 12 mm, AR type has bore diameter 15 to 50 mm, and ARF type is flanged with bore diameter 3 to 50 mm, all standardized. Supports radial load (ARF type also supports axial load).
NTN Corporation
-
Bushings
Bearie™ BRF Series Flanged Sleeve Bearing
Flanged resin bearing injection-molded from Bearie AS5005. Standardized bore diameters of 3 to 25 mm, capable of supporting both radial and axial loads.
NTN Corporation
-
Thrust Washers
Bearee™ TW-Type Thrust Washer
Thrust washer machined from Bearee FL3000 sheet material. Standardized thickness of 0.8 mm and inner diameter of 6 to 50 mm.
NTN Corporation
-
Bushings
Bearry™ MLE Type MLE Bearing
Three-layer high-load bearing made by sintering bronze powder onto a steel backing plate and impregnating the porous layer with Bearry FL7023. Inner diameter 4–60 mm.
NTN Corporation
-
Bushings
Bearye™ ML-Type M Liner Bearing
Thin-walled rolled bushing with FL3060 sheet material bonded to steel plate. Standardized bore diameters from 3 to 70 mm.
NTN Corporation