Double-Acting Wiper Seal A26-F

Specifications

ワイパー model comparison

Compare 4 models in the same series by specification.

How to choose Wipers

Points to check when selecting, with the values for this product (A26-F).

1. 1. Select a size that matches the rod diameter

   Wiper dimensions are determined by the applicable rod diameter d, and listed products cover a range of 6 to 600 mm. If the inner diameter does not match the rod, insufficient scraping allows contaminants to enter, while excessive tightening causes wear and heat generation. Check the actual rod outer diameter and tolerance before selecting.

2. 2. Match the housing groove dimensions and standards

   Wipers are designed to suit the shape of the housing groove in which they are installed. Confirm the housing groove width (1 to 3 mm for listed products) and which housing type of standards such as ISO 6195 the wiper is compatible with. When replacing parts in existing equipment, measure the actual groove dimensions before selecting.

3. 3. Check installation space by overall height

   Overall wiper height directly affects the axial installation space, and listed products range from 7 to 16 mm. Confirm that the wiper fits within the cylinder head design space and its arrangement with the rod seal and guide. Designs with greater overall height often provide more allowance for the lip and retaining section.

4. 4. Select a material suited to the fluid and environment

   PU offers excellent abrasion resistance and is widely used in environments with heavy mud or dust. NBR is well known for its compatibility with hydraulic oils. PTFE combined with an O-ring suits applications where friction and stick-slip (catching motion) need to be reduced. Choose according to the type of hydraulic oil and whether the application is for water hydraulics.

5. 5. Confirm the operating temperature range

   This product: Operating Temperature Range -55～+200 °C

   Rubber and resin wiper materials degrade or harden at high temperatures and lose elasticity at low temperatures, which reduces scraping performance. For outdoor cold-region use or machines running high-temperature hydraulic oil, confirm that both ambient and oil temperatures fall within the operating temperature range.

6. 6. Choose single-acting or double-acting and the sliding conditions

   This product: Maximum Sliding Speed 10 m/s

   Consider a double-acting type when you do not want residual oil film carried outward, or when combining with a PTFE rod seal. In environments where mud or ice adheres, designs that remove adhered foreign matter at the front stage are also used. Also confirm that the maximum sliding speed (1 to 10 m/s for listed products) exceeds the rod speed.

This guide was written by AI based on the listed products' documents and specification items.

About Wipers and all products

Description

Double-acting wiper seal with built-in O-ring structure. The wiping lip reduces residual oil film. Wear resistance is enhanced by X-ECOPUR series material.

FAQ

Q. What are the operating temperature range and maximum sliding speed of the A26-F?

A. The operating temperature range is -55 to +200 °C, and the maximum sliding speed is 10 m/s.

Q. What is the maximum operating pressure of the A26-F?

A. The maximum operating pressure is 16 bar.

Q. What types of equipment can the A26-F be used in?

A. It can be used in hydraulic equipment and pneumatic equipment.

Q. What is the structure and what are the features of the A26-F?

A. It is a double-acting wiper seal with a built-in O-ring. The wiping lip reduces residual oil film, suppresses friction, and follows rod eccentricity.

Q. What material is used to improve the wear resistance of the A26-F?

A. Wear resistance is enhanced by X-ECOPUR series material.

Written by AI based on the content of the source documents.

Source documents

• Catalog 切削加工シール製品ラインアップ 84 pages Open page 46
  Found on: https://azuma-eg.com/catalogue/