Catalog Searcher
Categories

KRE 80 PPA

Model KRE 80 PPA / KRE シリーズ(カムフォロア) / SKF (Official website) / Listed on page 48 of the document

Eccentric cam follower with an outer diameter of approximately 80 mm.

Last verified: (date the content was verified against the source document)

KRE 80 PPA on page 48 of SKF "SKF トラックランナー軸受 (14 トラックランナー軸受)"
Source: SKF「SKF トラックランナー軸受 (14 トラックランナー軸受)」page 48
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Basic dynamic load rating Cr 36,9 kN
Basic static load rating C0r 72 kN
Limiting speed 1 800 r/min

KRE シリーズ(カムフォロア) model comparison

Compare 8 models in the same series by specification.

Model Basic dynamic load rating Cr Basic static load rating C0r Limiting speed
KRE 35 PPA 9,52 kN 13,7 kN 4 000 r/min
KRE 40 PPA 10,5 kN 14,6 kN 3 400 r/min
KRE 47 PPA 14,7 kN 24,5 kN 3 000 r/min
KRE 52 PPA 15,7 kN 27 kN 3 000 r/min
KRE 62 PPA 24,6 kN 44 kN 2 400 r/min
KRE 72 PPA 26 kN 48 kN 2 400 r/min
KRE 80 PPA This product 36,9 kN 72 kN 1 800 r/min
KRE 90 PPA 38 kN 76,5 kN 1 800 r/min

How to choose Cam Followers

Points to check when selecting, with the values for this product (KRE 80 PPA).

  1. 1. Select outer diameter to suit surface and load

    The outer diameter D is the basic dimension that determines the surface pressure on the mating contact surface and the required installation space. Listed products range from 16 to 52 mm. A larger outer diameter lowers the surface pressure and reduces wear on the mating surface. Determine it by checking against the dimensions of the cam groove or rail.

  2. 2. Verify life with dynamic load rating

    This product: Basic dynamic load rating Cr 36,9 kN

    The basic dynamic load rating Cr is the reference value for life calculation. Listed products range from 9 to 78 kN. Even with the same outer diameter, full-complement and high-load types have a higher Cr. Select by calculating the required life from the actual load and rotational speed. If shock loads are present, also check the basic static load rating C0r.

  3. 3. Choose between cylindrical and crowned outer ring

    A crowned (spherical) outer ring reduces edge loading caused by mounting errors and suppresses stress concentration at the outer ring ends. A cylindrical outer ring has a longer contact length and is a shape that easily lowers the surface pressure on the mating surface. Select according to the accuracy of the mating surface and the mounting accuracy.

  4. 4. Confirm mounting with stud diameter and thread

    The stud diameter d and thread designation determine the machining dimensions of the mounting hole and the tightening torque. If the threaded portion is too long, it may not pass through the frame, so check the frame plate thickness and nut position together with the overall length B.

  5. 5. Select eccentric type when position adjustment is required

    With the eccentric stud type, turning the stud shifts the roller position, so the contact and clearance of multiple rollers can be adjusted after assembly. The eccentricity of listed products ranges from 0.25 to 1 mm. Confirm that the required adjustment allowance falls within this range.

  6. 6. Use sealed type in dust and cutting fluid environments

    In environments exposed to dust, cutting fluid, or moisture, selecting a sealed type such as 2RS helps suppress foreign matter ingress and grease leakage. Unsealed types have lower rotational resistance, but they require a maintenance plan such as periodic lubrication through the grease hole.

This guide was written by AI based on the listed products' documents and specification items.

About Cam Followers and all products

Description

Eccentric type of the KR series.

Features

  • Eccentric

FAQ

Q. What are the basic dynamic load rating, basic static load rating, and limiting speed of the KRE 80 PPA?
A. The basic dynamic load rating Cr is 36.9 kN, the basic static load rating C0r is 72 kN, and the limiting speed is 1 800 r/min.
Q. What type of product is the KRE 80 PPA?
A. It is a cam follower of the KRE series, an eccentric type of the KR series. It is an eccentric cam follower with an outer diameter of approximately 80 mm.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Cam Followers products, ordered by similarity of specifications and applications.

More products from SKF

See all →