Catalog Searcher
Categories

Insert Parts BHL Hook Insert UDV・UDVD

BHL / Iwata Seisakusho Co., Ltd. (Official website) / Listed on page 32 of the document

Iron hook insert compatible with BHL caps. Available in two types: UDV and UDVD.

Last verified: (date the content was verified against the source document)

Insert Parts BHL Hook Insert UDV・UDVD on page 32 of Iwata Seisakusho Co., Ltd. "塗装治具 ハンガー選定ガイドブック"
Source: Iwata Seisakusho Co., Ltd.「塗装治具 ハンガー選定ガイドブック」page 32
A reduced image of the relevant page is quoted from the document. Copyright belongs to Iwata Seisakusho Co., Ltd..Request removal

Specifications

Material Iron

BHL model comparison

Compare 4 models in the same series by specification.

Model Material Box quantity Pack quantity
インサートパーツ BHL アローインサート（P PS・P DV・P P・PD） Iron 1000 個 10 個
インサートパーツ BHL フックインサート UDV・UDVD This product Iron — —
インサートパーツ BHL プロファイルヨーク・ワイヤーアロー Iron — —
ソケットキャップ BHL 用 Silicone 500 個 10 個

How to choose Insert

Points to check when selecting, with the values for this product (Insert Parts BHL Hook Insert UDV・UDVD).

  1. 1. Thread size matching the workpiece hole diameter

    The insert is held in the workpiece's threaded hole or bore, so if the nominal diameter (such as M6) does not match, holding force will be insufficient or insertion will not be possible. Check the thread diameter and hole depth on the workpiece drawing, and select a product with the same nominal diameter.

  2. 2. Choosing a shape that suits the holding method

    Arrow types are inserted into threaded holes and held by elasticity, while hook and yoke types are hooked onto a hole or edge to suspend the workpiece. Determine the shape by checking the shape of the workpiece's holding section and which surfaces may be hidden by paint. Also confirm the compatible cap series.

  3. 3. Wire diameter according to load

    A thicker wire diameter increases rigidity and reduces deformation under heavy workpieces. However, thick wire will not fit into narrow holes. For heavy items, select thicker, high-rigidity heavy-duty series; for small items, select thinner diameters, and balance this against the hole diameter.

  4. 4. Overall length and insertion depth

    The overall length is determined by the insertion allowance into the cap, the insertion depth into the workpiece, and the distance between the workpiece and the hanger. If it is too long, swinging and contact will occur; if it is too short, holding will be shallow. Also consider the workpiece spacing on the line when selecting.

  5. 5. Checking suspended mass

    If the rated load is exceeded, the insert may bend and the workpiece may fall. Add the mass per workpiece, with allowance for paint buildup and swinging during conveyance, and compare the total with the rated load.

  6. 6. Baking temperature and ensuring electrical continuity

    Confirm that the baking oven temperature is at or below the heat resistance temperature. In powder coating and electrodeposition coating, the insert serves as the electrical or grounding path, so paint buildup causes poor continuity. Decide in advance the interval for stripping or replacing the inserts.

This guide was written by AI based on the listed products' documents and specification items.

About Insert and all products

Description

Hook inserts of UDV and UDVD types. Multiple part numbers are available depending on wire diameter and dimensions.

Features

  • Made of iron
  • Compatible with BHL caps

Applications

  • Contact component for paint hangers

FAQ

Q. What kind of product is Insert Parts BHL Hook Insert UDV・UDVD?
A. It is an iron hook insert compatible with BHL caps. It is available in two types: UDV and UDVD. It is used as a contact component for paint hangers.
Q. What is the material of the BHL Hook Insert UDV・UDVD?
A. It is made of iron.

Written by AI based on the content of the source documents.

Source documents

More products from Iwata Seisakusho Co., Ltd.

See all →