Catalog Searcher
Categories

Finetex Fine Thread Sealing Type AZ 4.2×19

Model 167805 / ファインテクス 細目シーリングタイプ / Japan Power Fastening Corporation (Official website)

Stainless steel drilling screw for thin sheets. Equipped with an EPDM sealing washer, applicable to a fastening thickness of 0.8 to 9.0 mm.

Last verified: (date the content was verified against the source document)

Specifications

Nominal diameter 4.2 mm
Length (under head) L 19 mm
Thread length 15.5 mm
Head outer diameter 9.0 mm
Head height 2.5 mm
Cross recess #2
Washer Outer Diameter 12.7 mm
Washer Height 3.4 mm
Cutting edge diameter 2.9 mm
Cutting edge length 3.5 mm
Applicable plate thickness 0.4~1.2 mm
Grip length 0.8~9.0 mm
Box quantity 400 本
Outer carton quantity 10 箱
Number of outer cartons (pieces) 4000 本

ファインテクス 細目シーリングタイプ model comparison

Compare 7 models in the same series by specification.

Model Nominal diameter Length (under head) L Applicable plate thickness Grip length Cross recess Thread length Head outer diameter Head height
167134 4.2 mm 13 mm 0.4~1.2 mm 0.8~5.0 mm #2 9.5 mm 9.0 mm 2.5 mm
167145 4.2 mm 16 mm 0.4~1.2 mm 0.8~8.0 mm #2 12.5 mm 9.0 mm 2.5 mm
167156 4.2 mm 19 mm 0.4~1.2 mm 0.8~11.0 mm #2 15.5 mm 9.0 mm 2.5 mm
167167 4.2 mm 16 mm 0.4~1.2 mm 0.8~6.0 mm #2 12.5 mm 9.0 mm 2.5 mm
167178 4.2 mm 19 mm 0.4~1.2 mm 0.8~9.0 mm #2 15.5 mm 9.0 mm 2.5 mm
167794 4.2 mm 16 mm 0.4~1.2 mm 0.8~6.0 mm #2 12.5 mm 9.0 mm 2.5 mm
167805 This product 4.2 mm 19 mm 0.4~1.2 mm 0.8~9.0 mm #2 15.5 mm 9.0 mm 2.5 mm

How to choose Drill screws

Points to check when selecting, with the values for this product (167805).

  1. 1. Select the under-head length to suit the total fastening thickness

    This product: Grip length 0.8~9.0 mm

    If the under-head length of a drill screw is insufficient for the total thickness of the parts, the thread will not sufficiently engage after the cutting edge passes through, and adequate holding force will not be achieved. In the listed examples, the 4.2×13 fastens a thickness of 0.8 to 5.0 mm, while the 4.2×19 accepts up to 11.0 mm, so the upper limit changes with length. For washer types, confirm that the maximum fastening thickness is smaller even at the same length.

  2. 2. Check the drillable plate thickness

    This product: Applicable plate thickness 0.4~1.2 mm

    There is a limit to the steel sheet thickness through which the drill tip can cut a hole. In plates thicker than the cutting edge length, the thread engages before the cutting edge breaks through, causing seizure or breakage. Confirm that the thickness of the base steel sheet is within the applicable plate thickness range. In the listed example, the cutting edge diameter is 2.9 mm and the cutting edge length is 3.5 mm.

  3. 3. Check consistency of length and dimensions

    This product: Length (under head) L 19 mm

    The under-head length L is the length from the bearing surface of the head to the tip, which differs from the screw length. In the listed examples, L ranges from 13 to 19 mm and the screw length from 9.5 to 15.5 mm. The cutting tip portion has no thread, so judge actual thread engagement by the screw length, and also check the amount of protrusion on the back side.

  4. 4. Select diameter to determine holding force and plate thickness

    This product: Nominal diameter 4.2 mm

    The nominal diameter affects pull-out strength and shear strength, and should be selected according to the target member and base thickness. The listed example has a nominal diameter of 4.2 mm, and its fine thread is designed to secure enough thread engagement even in thin sheets. The stripping torque (the torque at which the thread is stripped) stated in the product features is also a useful guide for tightening control.

  5. 5. Choose a washer type where waterproofing is required

    This product: Washer Outer Diameter 12.7 mm

    On roofs, exterior walls and other areas exposed to rain, a sealing washer type helps reduce water ingress through the screw hole. There are an integrated EPDM washer type and a two-piece washer type, and the listed examples have washer outer diameters of 11 to 12.7 mm. The head protrudes by the washer height (3.4 to 3.5 mm), so also check the installation clearance.

  6. 6. Use a bit that matches the Phillips recess number

    This product: Cross recess #2

    If the Phillips recess number does not match the driver bit size, cam-out (the bit lifting out of the recess) can deform the head or prevent thrust from being transmitted during drilling. Confirm in advance that the power tool and bit number used for installation match the Phillips recess of the product.

This guide was written by AI based on the listed products' documents and specification items.

About Drill screws and all products

Description

Latest thin-sheet dedicated drilling screw made of SUS. Adopts SUSGUARD SG for increased stripping torque and increased back torque, suppressing free rotation and loosening. Dome-shaped sealing washer is made of stainless steel SUS304, and the packing is made of EPDM. Made in Japan.

Features

  • Increased stripping torque
  • Increased back torque
  • AZ type (integrated sealing washer)

Applications

  • Fastening of thin-sheet roofs and exterior walls
  • Installation of metal folded-plate roofing

FAQ

Q. What are the fastening thickness and applicable sheet thickness range for Finetex Fine Thread Sealing Type AZ 4.2×19 (model 167805)?
A. The fastening thickness is 0.8 to 9.0 mm, and the applicable sheet thickness is 0.4 to 1.2 mm.
Q. What are the material of the drilling screw and the material of the sealing part for model 167805?
A. The screw is made of stainless steel (SUS). The dome-shaped sealing washer is made of SUS304, and the packing is made of EPDM.
Q. What applications is Finetex Fine Thread Sealing Type AZ 4.2×19 (model 167805) suited for?
A. It can be used for fastening thin-sheet roofs and exterior walls and for installation of metal folded-plate roofing.
Q. Does the screw model 167805 have a mechanism to prevent free rotation and loosening?
A. It adopts SUSGUARD SG, which increases stripping torque and back torque, suppressing free rotation and loosening.
Q. What are the dimensions and packaging quantities of Finetex Fine Thread Sealing Type AZ 4.2×19 (model 167805)?
A. Nominal diameter 4.2 mm, length under head L19 mm, thread length 15.5 mm, head outer diameter 9.0 mm, head height 2.5 mm, washer outer diameter 12.7 mm, washer height 3.4 mm. Box quantity is 400 pieces, and outer carton quantity is 10 boxes (4000 pieces per outer carton).

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Drill screws products, ordered by similarity of specifications and applications.

More products from Japan Power Fastening Corporation

See all →