Catalog Searcher
Categories
🌐 English

Tapstar Z

タップスターZ / Japan Power Fastening Corporation (Official website) / Listed on page 1 of the document

A steel screw-in post-installed anchor for concrete, installed by threading into the substrate. Resists edge cracking and can be removed; high-corrosion-resistance type with Geomet multi-layer surface treatment.

Last verified: (date the content was verified against the source document)

Tapstar Z on page 1 of Japan Power Fastening Corporation "タップスター鋼製高耐食タイプの新発売につきまして"
Source: Japan Power Fastening Corporation「タップスター鋼製高耐食タイプの新発売につきまして」page 1
A reduced image of the relevant page is quoted from the document. Copyright belongs to Japan Power Fastening Corporation.Request removal

Specifications

Bolt diameter × overall length M8×50, M10×60, M12×70, M12×100, M16×100
Anchor screw diameter 8.5～16.5 mm
Drill diameter 7.5～15.0 mm
Minimum insertion depth (pilot hole depth) 35～60 mm
Maximum thickness of mounted object 3～35 mm

Description

Carbon steel body with Geomet multi-layer surface treatment, a high-corrosion-resistance finish free of hexavalent chromium. The included nut and flat washer are hot-dip galvanized carbon steel. Available in multiple sizes and models from M8 to M16; drill diameter and installation depth vary by size.

Features

  • Screw-in installation into concrete
  • Resists edge cracking
  • Removable
  • High corrosion resistance and heat resistance from Geomet multi-layer treatment
  • Surface treatment free of hexavalent chromium

Applications

  • Fixing to concrete

FAQ

Q. What types of concrete can Tapstar Z be used in?
A. Tapstar Z is a steel screw-in post-installed anchor installed by threading into concrete. The product information does not specify the types of concrete or conditions for use.
Q. What are the maximum fixture thickness and drill diameter for Tapstar Z?
A. The maximum fixture thickness is 3 to 35 mm. The drill diameter is 7.5 to 15.0 mm, varying by size.
Q. What are the pilot hole depth and size range for Tapstar Z?
A. The minimum embedment depth (pilot hole depth) is 35 to 60 mm. Available bolt diameter x length: M8 x 50, M10 x 60, M12 x 70, M12 x 100, and M16 x 100.
Q. What can you tell me about the surface treatment and corrosion resistance of Tapstar Z?
A. It has Geomet multi-layer treatment, providing high corrosion resistance and heat resistance. It is a surface treatment type free of hexavalent chromium. The included nut and flat washer are hot-dip galvanized carbon steel.
Q. Does Tapstar Z resist edge cracking and can it be removed?
A. Yes. It resists edge cracking and can be removed.

Written by AI based on the content of the source documents.

Source documents

More products from Japan Power Fastening Corporation

See all →