Catalog Searcher
Categories

ALinC Alinco Truss 5×40

Model トラス 5×40 / ALinC アリンコ / Japan Power Fastening Corporation (Official website)

Truss head screw-fixed anchor for fastening mounting components to ALC panels. 5 mm diameter, 40 mm length type.

Last verified: (date the content was verified against the source document)

Specifications

Overall length L 40 mm
Thread length ℓ 36 mm
Head diameter D 11 mm
Head height H 3 mm
Material Stainless steel SUS430
Number of packs (pieces) 70 本
Product code (power pack) 719926

ALinC アリンコ model comparison

Compare 22 models in the same series by specification.

Model Overall length L Thread length ℓ Head diameter D Head height H Material Number of packs (pieces) Product code (power pack)
サラ 4×35 35 mm 30 mm 7 mm 2.3 mm Stainless steel SUS430 100 本 720069
サラ 4×40 40 mm 37 mm 7 mm 2.3 mm Stainless steel SUS430 85 本 713755
サラ 4×50 50 mm 40 mm 7 mm 2.3 mm Stainless steel SUS430 80 本 713766
サラ 5×35 35 mm 31 mm 9 mm 3 mm Stainless steel SUS430 80 本 719981
サラ 5×40 40 mm 36 mm 9 mm 3 mm Stainless steel SUS430 70 本 720080
サラ 5×50 50 mm 40 mm 9 mm 3 mm Stainless steel SUS430 60 本 720025
サラ 5×65 65 mm 55 mm 9 mm 3 mm Stainless steel SUS430 50 本 720047
サラ 6×40 40 mm 37 mm 10 mm 3.5 mm Stainless steel SUS430 60 本 713777
サラ 6×50 50 mm 40 mm 10 mm 3.5 mm Stainless steel SUS430 50 本 713788
サラ 6×65 65 mm 55 mm 10 mm 3.5 mm Stainless steel SUS430 45 本 713799
トラス 4×35 35 mm 32 mm 8 mm 2 mm Stainless steel SUS430 100 本 713667
トラス 4×40 40 mm 37 mm 8 mm 2 mm Stainless steel SUS430 85 本 713678
トラス 4×50 50 mm 40 mm 8 mm 2 mm Stainless steel SUS430 80 本 713689
トラス 5×35 35 mm 31 mm 11 mm 3 mm Stainless steel SUS430 80 本 719904
トラス 5×40 This product 40 mm 36 mm 11 mm 3 mm Stainless steel SUS430 70 本 719926
トラス 5×50 50 mm 40 mm 11 mm 3 mm Stainless steel SUS430 60 本 719937
トラス 5×65 65 mm 55 mm 11 mm 3 mm Stainless steel SUS430 50 本 719959
トラス 6×35 35 mm 33 mm 12 mm 3 mm Stainless steel SUS430 75 本 713700
トラス 6×40 40 mm 37 mm 12 mm 3 mm Stainless steel SUS430 60 本 713711
トラス 6×50 50 mm 40 mm 12 mm 3 mm Stainless steel SUS430 50 本 713722
トラス 6×65 65 mm 55 mm 12 mm 3 mm Stainless steel SUS430 45 本 713733
トラス 6×80 80 mm 55 mm 12 mm 3 mm Stainless steel SUS430 30 本 713744

How to choose Fastening Parts

Points to check when selecting, with the values for this product (トラス 5×40).

  1. 1. Select a nominal diameter suited to the substrate and load

    The nominal diameter is the outer diameter of the thread. A larger diameter increases pull-out and shear resistance, but it must pass through the hole in the mounted item. Listed examples are 4 mm, 5 mm and 6 mm; determine the size by matching the hole diameter of the bracket and the weight of the suspended equipment.

  2. 2. Determine the overall length from item thickness plus required embedment

    This product: Overall length L 40 mm

    The overall length L of listed products is 35 to 80 mm. The remaining length after subtracting the thickness of the mounted item (band or bracket) is the embedment depth into the substrate, so for soft substrates such as ALC panels choose a length that secures sufficient embedment. Also confirm that the screw does not pass through the back of the substrate thickness.

  3. 3. Check the thread length engaging the substrate

    This product: Thread length ℓ 36 mm

    The thread length ℓ of listed products is 30 to 55 mm, and this threaded portion provides the holding power. Even with the same overall length, a short threaded section means fewer threads engage the substrate depending on the thickness of the mounted item. Estimate the effective engagement length together with the thickness of the mounted item.

  4. 4. Choose the head shape according to the mounting hole and finish

    Flat heads sink into countersunk holes to give a flush surface. Truss heads have a large, low profile and suit holding down brackets or bands with holes that are not countersunk, using their wide bearing surface. Decide based on the hole shape of the mounted item and whether the head may protrude.

  5. 5. Verify bearing surface and clearance using head diameter and height

    This product: Head diameter D 11 mm

    Head diameter D is in the range of 7 to 12 mm and head height H is 2 to 3.5 mm. If the head diameter is not sufficiently larger than the hole in the mounted item, it cannot hold securely, and head height affects interference with surrounding members or covers. For brackets with slotted holes, confirm that the head diameter reliably exceeds the slot width.

  6. 6. Check material and surface treatment for outdoor or humid environments

    This product: Material Stainless steel SUS430

    Corrosion is a concern for applications outdoors, such as downspout bands. Check the body material (such as stainless steel) and whether anti-corrosion treatment is applied, and watch for galvanic corrosion where the fastener contacts dissimilar metals in the mounting bracket. For structural applications where certified products are specified, as with structural screws, use products that conform to the certified specification.

This guide was written by AI based on the listed products' documents and specification items.

About Fastening Parts and all products

Features

  • Tip shape with excellent bite during screw-in
  • Excellent screw-in performance and high strength
  • Rust-resistant SUSGUARD SG treatment

Applications

  • Saddle bands
  • Lighting equipment
  • Downspout bands
  • Duct channels
  • Box-type items
  • Hanger supports, etc.

FAQ

Q. What applications can ALinC Alinco Truss 5×40 be used for?
A. It can be used for installing saddle bands, lighting equipment, downspout bands, duct channels, box-type items, hanger supports, etc. It is a truss head screw-fixed anchor for fastening mounting components to ALC panels.
Q. What are the dimensions and material of ALinC Alinco Truss 5×40?
A. Overall length L is 40 mm, thread length ℓ is 36 mm, head diameter D is 11 mm, and head height H is 3 mm. The material is stainless steel SUS430.
Q. What are the features of ALinC Alinco Truss 5×40, and how many pieces are in one pack?
A. Features include a tip shape with excellent bite during screw-in, excellent screw-in performance and high strength, and rust-resistant SUSGUARD SG treatment. The pack quantity is 70 pieces, and the product code (Power Pack) is 719926.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Fastening Parts products, ordered by similarity of specifications and applications.

More products from Japan Power Fastening Corporation

See all →