EXSEV-XT High-Temperature Grease-Sealed Bearing

Specifications

How to choose Plain Bearings

Points to check when selecting, with the values for this product (EXSEV-XT High-Temperature Grease-Sealed Bearing).

1. 1. Select dimensions that fit the shaft diameter and housing bore

   This product: Inner diameter d 4～40 mm

   Match the inside diameter d to the shaft diameter and the outside diameter D to the housing bore diameter. Listed products have inside diameters of 3 to 70 mm and outside diameters of 5 to 80 mm. When press-fitting, allow for the bearing shrinking during installation, which reduces the inside diameter. Also check the shaft and housing tolerances recommended by the manufacturer.

2. 2. Verify bearing pressure and speed using the PV value

   Confirm that the PV value, which is the product of bearing pressure (load divided by projected area) and sliding speed, does not exceed the limiting PV value. The limiting PV value of listed products is 400 MPa·m/min. The individual limits for bearing pressure alone (3 to 10 MPa) and for sliding speed alone (150 m/min) must also be satisfied.

3. 3. Determine the length according to the load

   Increasing the length L increases the projected area and lowers the bearing pressure. However, if the length is too great, shaft deflection tends to concentrate the load at the ends, causing edge loading. Listed products have lengths of 3 to 60 mm, so select a length that keeps the bearing pressure within the limit.

4. 4. Select a material suited to the operating environment

   For underwater or chemical-liquid use, choose a material with chemical resistance and wear resistance in liquid. Where static electricity is a concern, choose a conductive material. Wear of the mating material also varies with the material and hardness of the mating shaft. If antistatic performance is required, also check the volume resistivity.

5. 5. Check temperature and operating clearance

   Resin bearings expand as temperature rises, which reduces clearance. In addition to the maximum operating temperature (300 to 350 °C) and continuous operating temperature (260 °C), maintain the recommended minimum operating clearance (0.095 to 0.195 mm).

6. 6. Match the lubrication method to the maintenance conditions

   Whether a bearing can run without lubrication, or requires oil-impregnated or external lubrication, affects maintenance effort and the risk of contamination in the surroundings. Greaseless types are suitable for food machinery and clean environments. For use in vacuum, also check the usable vacuum level and low outgassing performance.

This guide was written by AI based on the listed products' documents and specification items.

About Plain Bearings and all products

Description

Uses outer and inner rings made of martensitic stainless steel and is sealed with high-temperature fluorine grease usable up to 300℃.

FAQ

Q. What are the maximum operating temperature and the bore and outer diameter ranges of the EXSEV-XT High-Temperature Grease-Sealed Bearing (SV series)?

A. The maximum operating temperature is MAX300 ℃. The bore diameter d ranges from 4 to 40 mm, and the outer diameter D ranges from 12 to 80 mm.

Q. What applications and environments is the EXSEV-XT High-Temperature Grease-Sealed Bearing (SV series) suited for?

A. It is used in semiconductor manufacturing equipment, liquid crystal manufacturing equipment, transfer robots, and vacuum pumps. It is clean and vacuum compatible, and non-magnetic.

Q. What are the materials of the outer and inner rings and the sealed grease of the EXSEV-XT High-Temperature Grease-Sealed Bearing (SV series)?

A. The outer and inner rings are made of martensitic stainless steel. It is sealed with high-temperature fluorine grease usable up to 300℃.

Q. What is the allowable rotational speed of the EXSEV-XT High-Temperature Grease-Sealed Bearing (SV series)?

A. The allowable rotational speed is 4,700 to 13,000 min-1.

Written by AI based on the content of the source documents.

Source documents

• Catalog 特殊環境用軸受シリーズ 軸受・セラミック軸受 (EXSEV Bearings and CERAMIC Bearings for Extreme Special Environments)
  Found on: https://koyo.jtekt.co.jp/support/catalog-download/