Bearee™ Sliding Components for Food Machinery
ベアリー食品機械用しゅう動材料 / NTN Corporation (Official website) / Listed on page 20 of the document
Resin sliding components for food machinery, supplied in non-black sliding materials selected according to conditions. Cannot be used at points in direct contact with food.
Last verified: (date the content was verified against the source document)
A reduced image of the relevant page is quoted from the document. Copyright belongs to NTN Corporation.Request removal
Specifications
| Continuous operating temperature | 60~260 ℃ |
|---|
Description
Materials are available in red, yellow, light yellow, white, and light brown, selectable according to application. Includes FL3000, FL3030, FL3642, UH3000, and AS5000, with limiting PV and continuous operating temperature shown in tables.
Features
- Non-black materials available
- Compatible with environments such as underwater and in air
Applications
- Sliding parts of food machinery
- Locations not in direct contact with food
FAQ
- Q. Can Bearee™ Sliding Components for Food Machinery be used at points in direct contact with food?
- A. They cannot be used at points in direct contact with food. Please use them at sliding parts of food machinery and at locations not in direct contact with food.
- Q. What colors of materials are available for Bearee sliding materials for food machinery?
- A. Materials are available in red, yellow, light yellow, white, and light brown, selectable according to application. Non-black materials are available.
- Q. Under what conditions can FL3000, FL3030, FL3642, UH3000, and AS5000 of Bearee sliding materials for food machinery be used?
- A. They are compatible with environments such as underwater and in air. Continuous operating temperature is 60 to 260 ℃, and limiting PV and continuous operating temperature are shown in tables for each product.
Written by AI based on the content of the source documents.
Source documents
- Catalog エンジニアリング・プラスチック製しゅう動部品 ベアリー™ 26 pages Open page 20
More products from NTN Corporation
See all →-
Bushings
Bearry™ ARE, AR, and ARF Type Sleeve Bearings
Resin sleeve bearings made with Bearry FL3000. ARE type has bore diameter 3 to 12 mm, AR type has bore diameter 15 to 50 mm, and ARF type is flanged with bore diameter 3 to 50 mm, all standardized. Supports radial load (ARF type also supports axial load).
NTN Corporation
-
Bushings
Bearie™ BRF Series Flanged Sleeve Bearing
Flanged resin bearing injection-molded from Bearie AS5005. Standardized bore diameters of 3 to 25 mm, capable of supporting both radial and axial loads.
NTN Corporation
-
Thrust Washers
Bearee™ TW-Type Thrust Washer
Thrust washer machined from Bearee FL3000 sheet material. Standardized thickness of 0.8 mm and inner diameter of 6 to 50 mm.
NTN Corporation
-
Bushings
Bearry™ MLE Type MLE Bearing
Three-layer high-load bearing made by sintering bronze powder onto a steel backing plate and impregnating the porous layer with Bearry FL7023. Inner diameter 4–60 mm.
NTN Corporation
-
Bushings
Bearye™ ML-Type M Liner Bearing
Thin-walled rolled bushing with FL3060 sheet material bonded to steel plate. Standardized bore diameters from 3 to 70 mm.
NTN Corporation
-
Sliding screw
Bearee™ MSS Miniature Resin Sliding Screw
Low-noise miniature resin sliding screw combining an AS5000 nut with an SUS304 screw shaft. Nominal diameter 4–12 mm.
NTN Corporation