SKF SYSTEM 24 LAGD 60/WA2

Specifications

SKF SYSTEM 24 LAGD model comparison

Compare 18 models in the same series by specification.

How to choose Automatic lubrication devices

Points to check when selecting, with the values for this product (LAGD 60/WA2).

1. 1. Select a lubricant suited to the application

   This product: Lubricants LGWA 2 (high load, extreme pressure, wide temperature range)

   Prefilled lubricants include high-temperature, high-load/extreme-pressure, NSF H1 registered food-machinery grades, and biodegradable types. Grease is generally used for bearings and oil for chains. Mixing with existing lubricants may reduce performance, so confirm the brand and thickener compatibility, and select an empty oil unit if you intend to use your own oil.

2. 2. Determine capacity from required lubrication volume

   This product: Lubricant Capacity 60 ml

   The main capacities are 60 ml and 125 ml. Determine the capacity by multiplying the required lubrication volume for each lubrication point (such as the equipment manufacturer's recommended value) by the desired replacement interval. For the same discharge period, a larger capacity dispenses more lubricant per unit time, so check that it is neither too large nor too small for the size of the lubrication point.

3. 3. Set the discharge period to match the replacement interval

   This product: Rated service period 1～12 ヶ月

   The listed example allows the discharge period to be adjusted from 1 to 12 months. Matching it to the periodic inspection interval allows replacement work to be consolidated. Because gas-driven types change discharge speed with ambient temperature, periodically check the remaining lubricant in the transparent container to confirm it is decreasing as set.

4. 4. Check generated pressure and piping conditions

   This product: Maximum Generated Pressure 5 bar

   The maximum generated pressure of the listed product is 5 bar. Because the pressure is low, installing it at a distance with a hose may prevent discharge due to piping resistance. Direct mounting is the basic approach; when using stiff grease or long piping, check that the passage is not clogged and that back pressure is not high.

5. 5. Match the thread standard of the lubrication port

   This product: Connection Thread R1/4

   If the mounting thread does not match the standard of the lubrication port (such as a grease nipple mounting hole), an adapter will be required. Confirm the thread standard and size on the equipment side in advance, and for oil use also check whether a check valve is included.

6. 6. Confirm the operating environment and explosion-proofing requirements

   This product: Ambient temperature range -20～+60 ℃

   The ambient temperature range affects discharge stability and lubricant performance, so compare it with the installation site temperature. In hazardous areas such as those with flammable gases, select an ATEX-certified product matching the zone classification (some products are also certified for Zone 0).

This guide was written by AI based on the listed products' documents and specification items.

About Automatic lubrication devices and all products

Description

The transparent container allows visual confirmation of the discharge rate, and the discharge period can be adjusted within a range of 1 to 12 months using a toolless dial. ATEX certified, it can also be used in Zone 0 hazardous areas.

FAQ

Q. How can the discharge period of the SKF SYSTEM 24 LAGD 60/WA2 be adjusted?

A. The discharge period can be adjusted within a range of 1 to 12 months using the toolless dial.

Q. What are the ambient temperature range and hazardous area conditions for the LAGD 60/WA2?

A. The ambient temperature range is -20 to +60 ℃. It is ATEX certified and can be used in Zone 0 hazardous areas.

Q. What are the lubricant capacity, connection thread, and maximum generated pressure of the LAGD 60/WA2?

A. The lubricant capacity is 60 ml, the connection thread is R1/4, and the maximum generated pressure is 5 bar.

Q. What types of equipment is the LAGD 60/WA2 suitable for lubricating?

A. It is used for lubricating bearing housings, electric motors, fans and pumps, conveyors, and cranes.

Q. What type of lubricant is sealed in the LAGD 60/WA2 and what are its features?

A. The lubricant is LGWA 2, a grease with high load, extreme pressure, and wide temperature range properties.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKF SYSTEM 24 - LAGDシリーズ ガス動作式シングルポイント自動給油/給脂装置 4 pages Open page 3
  Found on: https://azuma-eg.com/catalogue/