Catalog Searcher
Categories

MS Fixing Clip

MS 固定クリップ / SKF (Official website) / Listed on page 57 of the document

Fixing clip for preventing rotation of HM lock nuts. Available in MS 3044 to MS 31/1000.

Last verified: (date the content was verified against the source document)

MS Fixing Clip on page 57 of SKF "軸受付属品（アダプタスリーブ・取り外しスリーブ・ロックナット）"
Source: SKF「軸受付属品（アダプタスリーブ・取り外しスリーブ・ロックナット）」page 57
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Applicable bolt size M6~M24

How to choose Bearing Accessories

Points to check when selecting, with the values for this product (MS Fixing Clip).

  1. 1. Select the bore to suit the shaft or bearing

    The inner diameter d indicates the matching shaft or bearing bore, ranging from 5 to 45 mm in the listed products. For inner rings, check the shaft diameter and fit tolerance, and select a part number that matches the bearing dimensions. Mismatched dimensions can cause creep (slippage at the fitted surface) or assembly defects.

  2. 2. Verify outer diameter and width against mating parts

    The outer diameter D ranges from 8 to 55 mm and the width B from 8 to 40 mm. For needle roller bearing inner rings, the outer diameter forms the roller raceway, so select it to match the inscribed circle diameter of the bearing, and select the width to suit the bearing width and the axial mounting space. Parts with the same bore often differ in width or type, so verify by part number.

  3. 3. Select vibration-damping rings by bearing outer diameter

    Rubber vibration-damping rings are fitted between the outer ring of a Y-bearing and the housing bore, so the applicable bearing outer diameter (40 mm for the listed product) must match the Y-bearing being used. Also confirm the applicable housing type, such as a sheet-steel pressed plummer block housing.

  4. 4. Check the bolt diameter of fixing clips

    This product: Applicable bolt size M6~M24

    Fixing clips that prevent lock nuts from loosening are supplied with hex bolts and spring washers in some cases. Confirm that the applicable bolt size matches the nominal number of the HM lock nut to be combined, and determine in advance whether threaded holes must be machined.

  5. 5. Confirm rubber material and operating temperature

    Vibration-damping rings made of NBR (nitrile rubber) are limited in operating temperature range due to the properties of the rubber. Consider the ambient temperature and heat generated by the bearing, and confirm that conditions fall within the operating temperature range. In environments exposed to oil or chemicals, also verify material compatibility.

This guide was written by AI based on the listed products' documents and specification items.

About Bearing Accessories and all products

Description

Fixing clip attached to HM lock nuts to prevent rotation. Supplied with hexagon bolt and spring washer.

Features

  • Supplied with hexagon bolt and spring washer

Applications

  • Anti-rotation of lock nuts

FAQ

Q. What type of nut is the MS Fixing Clip used with?
A. It is a fixing clip attached to HM lock nuts to prevent rotation.
Q. What components are included with the MS Fixing Clip?
A. A hexagon bolt and spring washer are supplied.
Q. What is the applicable bolt size range for the MS Fixing Clip and what model numbers are available?
A. Applicable bolt sizes are M6 to M24. Available model numbers range from MS 3044 to MS 31/1000.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Bearing Accessories products, ordered by similarity of specifications and applications.

More products from SKF

See all →