Battery-Powered Grease Gun TLGB 20

Specifications

How to choose Grease gun

Points to check when selecting, with the values for this product (TLGB 20).

1. 1. Select a drive method that suits the workload

   Manual lever type is lightweight and requires no power source, but the operator's burden increases when there are many lubrication points. Electric type can dispense continuously at a constant flow rate and suits sites where many lubrication points are visited. Some listed electric models feature two-stage flow rates of low and high speed, or an alarm that signals nipple clogging.

2. 2. Dispensing pressure that reaches seized nipples

   This product: Maximum Discharge Pressure 400 bar

   High pressure is required for nipples where old grease has hardened, or for narrow lubrication paths. The maximum dispensing pressure during continuous use of the listed products is 300 to 400 bar, and some electric models reach 700 bar momentarily. Check that the pressure matches the resistance of the lubrication path at the point of application.

3. 3. Understand the output per operation

   Because the prescribed lubrication amount for each bearing is managed by the number of lever strokes, check the dispensed volume per stroke. The listed products range from 0.46 to 1.5 cm3, so lower-volume models suit fine adjustment of small amounts, while higher-volume models suit completing large-volume lubrication in a short time.

4. 4. Check capacity and filling method

   Grease capacity determines how often refilling is needed. The listed product has a capacity of 500 cm3. Also check whether it supports loose filling, cartridge loading, or both. Cartridge systems are less likely to allow foreign matter to enter during refilling and allow quick replacement.

5. 5. Determine reach by hose length

   This product: Hose length 900 mm

   A flexible hose is effective for nipples in recessed positions or narrow spaces. The listed products have hose lengths of 300 to 900 mm. A rigid dispensing pipe (175 mm) is easier to aim, but it is harder to reach through bent paths, so select according to the layout of the lubrication points.

6. 6. Check the mass for carrying

   This product: Mass 3.0 kg

   Because the tool is carried and operated with one hand, its mass directly affects operator fatigue. The listed products weigh 1.3 to 3 kg, and electric types are heavier due to the included battery. If work is frequently performed at height or under vehicles, compare handling ease as well.

This guide was written by AI based on the listed products' documents and specification items.

About Grease gun and all products

Description

The display shows battery level, discharge volume, pump rotation speed, and clogging. A single charge allows use of up to 15 cartridges. Equipped with a built-in light and a 3-point stand. TLGB 20/110V differs only in charger voltage.

FAQ

Q. What are the maximum discharge pressure and maximum peak pressure of the TLGB 20?

A. The maximum discharge pressure is 400 bar, and the maximum peak pressure is 700 bar.

Q. How much difference is there between the low-speed and high-speed discharge volumes of the TLGB 20?

A. The low-speed discharge volume is 100 ml/min, and the high-speed discharge volume is 160 ml/min. It features two-stage flow rate settings.

Q. How many cartridges can the TLGB 20 use on a single charge?

A. It can use up to 15 cartridges on a single charge.

Q. Please tell me the mass and hose length of the TLGB 20.

A. The mass is 3.0 kg, the total mass (including case) is 5.7 kg, and the hose length is 900 mm.

Q. What applications is the TLGB 20 suited for?

A. It is used for bearing lubrication in industrial machinery, lubrication in manufacturing facilities, and lubrication of agricultural and construction vehicles.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKFメンテナンス製品と潤滑製品 204 pages Open page 182
  Found on: https://azuma-eg.com/catalogue/