Catalog Searcher
Categories
🌐 English

Torsion Spring, Left-Hand Wound, Inner Diameter 3–6 mm (34-0320 to 34-0648)

ねじりスプリング 左巻 34シリーズ / Spring net (Official website)

Left-hand wound close-coil torsion spring made of SUS304-WPB. Compact range with inner diameter 3–6 mm, 2–5 coils, and angles of 90°, 135°, and 180°. Same-day shipping available.

Last verified: (date the content was verified against the source document)

Specifications

Inner diameter 3・4・5・6 mm
Arm length 12・16・20・24 mm
Wire diameter d 0.3〜1.0 mm
Material SUS304-WPB
Winding Direction Left (close-wound)

ねじりスプリング 左巻 34シリーズ model comparison

Compare 3 models in the same series by specification.

Model Wire diameter d Material Inner diameter Winding Direction Arm length
ねじりスプリング 左巻 内径12〜18mm(34-1220〜34-1848) 1.2〜2.9 mm SUS304-WPB 12・14・16・18 mm Left (close-wound) 48・56・64・72 mm
ねじりスプリング 左巻 内径3〜6mm(34-0320〜34-0648) This product 0.3〜1.0 mm SUS304-WPB 3・4・5・6 mm Left (close-wound) 12・16・20・24 mm
ねじりスプリング 左巻 内径7〜10mm(34-0720〜34-1048) 0.7〜1.6 mm SUS304-WPB 7・8・9・10 mm Left (close-wound) 28・32・36・40 mm

How to choose Springs

Points to check when selecting, with the values for this product (Torsion Spring, Left-Hand Wound, Inner Diameter 3–6 mm (34-0320 to 34-0648)).

  1. 1. Select the Spring Rate from the Required Force

    The spring rate k is the load required to deflect the spring by 1 mm. Multiply it by the deflection at installation and at operation to confirm that the required force can be obtained. Listed products range widely from 0.007 to 9.91 N/mm, and a margin should be allowed for variation, including the spring rate tolerance (for example, ±10%).

  2. 2. Keep Within the Maximum Load and Deflection Limits

    Using the spring beyond its maximum load or maximum deflection causes set (permanent deformation) or breakage. Confirm that the load at the maximum point of the operating stroke is within the maximum load, and for compression springs, that the solid height is not reached.

  3. 3. Installation Space, Outside Diameter, and Free Length

    Check that the outside diameter fits the hole or housing, and that the inside diameter does not interfere with the shaft it passes over (applicable shaft diameter). The free length is the length under no load; the difference from the installed length is the initial deflection. Because the coil diameter changes under load, allow sufficient clearance.

  4. 4. Select a Material Suited to the Operating Environment

    This product: Material SUS304-WPB

    Piano wire SWP-A has high strength but is prone to rust, and many versions are supplied with rust-preventive oil treatment. For humid environments or environments subject to washing, stainless steel such as SUS304-WPB is a candidate. For strongly corrosive environments such as seawater, titanium is a candidate.

  5. 5. Extension Springs: Initial Tension and Hook Shape

    Close-wound extension springs have initial tension, the load required before the spring begins to extend. For applications requiring movement with a small force, check the initial tension value. Also check that the hook shape, such as reverse loop, 90-degree, or 180-degree, matches how the mating part is engaged.

  6. 6. Torsion Springs: Angle and Arm Direction

    For torsion springs, check the torque at the operating angle (torsion spring rate × angle) and the arm length. The winding direction should match the direction of twist, and it is common to use the spring in the direction that winds it up. For free-size products, also specify the bending direction.

This guide was written by AI based on the listed products' documents and specification items.

About Springs and all products

Description

Left-hand wound close-coil torsion spring made from spring stainless steel wire. Compact range with inner diameter 3–6 mm; spring constant and operating angle are specified for each wire diameter, number of coils, and angle.

Features

  • Made of SUS304-WPB
  • Same-day shipping (orders placed by PM 5:00)
  • RoHS compliant

Applications

  • Return and biasing of small mechanical components
  • Opening and closing mechanisms in precision instruments

FAQ

Q. What are the material and winding direction of the Torsion Spring, Left-Hand Wound, 34 Series (inner diameter 3–6 mm)?
A. The material is SUS304-WPB, and the winding direction is left-hand (close-coil).
Q. What are the ranges of inner diameter, arm length, and wire diameter for the Torsion Spring, Left-Hand Wound, 34 Series (inner diameter 3–6 mm)?
A. Inner diameter is 3, 4, 5, and 6 mm, arm length is 12, 16, 20, and 24 mm, and wire diameter d is 0.3–1.0 mm.
Q. What applications is the Torsion Spring, Left-Hand Wound, 34 Series (34-0320 to 34-0648) suited for?
A. It is used for return and biasing of small mechanical components and in opening and closing mechanisms of precision instruments.
Q. What are the number of coils and angle options for the Torsion Spring, Left-Hand Wound, 34 Series?
A. It has 2–5 coils, and the angles are 90°, 135°, and 180°.
Q. Is the Torsion Spring, Left-Hand Wound, 34 Series RoHS compliant, and what are the conditions for same-day shipping?
A. It is RoHS compliant. Orders placed by PM 5:00 are eligible for same-day shipping.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Springs products, ordered by similarity of specifications and applications.

More products from Spring net

See all →