Catalog Searcher
Categories
🌐 English

Ultra Super Chain RF100-US-1

Model RF100-US-1 / ウルトラスーパチェーン / Tsubakimoto Chain Co. (Official website)

Heavy-duty drive chain with 31.75 mm pitch. Minimum tensile strength 149 kN, maximum allowable tension 39.2 kN.

Last verified: (date the content was verified against the source document)

Specifications

Pitch P 31.75 mm
Roller diameter R 19.05 mm
Inner link inner width W 19.05 mm
Plate thickness T 4.8 mm
Plate width H 30.1 mm
Pin diameter D 10.32 mm
Minimum tensile strength 149 (15200) kN (kgf)
Average tensile strength 172 (17500) kN (kgf)
Maximum allowable tension 39.2 (4000) kN (kgf)
Approximate mass 5.07 kg/m

ウルトラスーパチェーン model comparison

Compare 6 models in the same series by specification.

Model Pitch P Roller diameter R Inner link inner width W Pin diameter D Maximum allowable tension Minimum tensile strength Average tensile strength Plate thickness T
RF100-US-1 This product 31.75 mm 19.05 mm 19.05 mm 10.32 mm 39.2 (4000) kN (kgf) 149 (15200) kN (kgf) 172 (17500) kN (kgf) 4.8 mm
RF120-US-1 38.10 mm 22.23 mm 25.40 mm 12.28 mm 53.9 (5500) kN (kgf) 213 (21700) kN (kgf) 245 (25000) kN (kgf) 5.6 mm
RF140-US-1 44.45 mm 25.40 mm 25.40 mm 13.97 mm 63.7 (6500) kN (kgf) 273 (27800) kN (kgf) 314 (32000) kN (kgf) 6.4 mm
RF160-US-1 50.80 mm 28.58 mm 31.75 mm 15.62 mm 85.3 (8700) kN (kgf) 341 (34800) kN (kgf) 392 (40000) kN (kgf) 7.15 mm
RF200-US-1 63.50 mm 39.68 mm 38.10 mm 20.41 mm 108 (11000) kN (kgf) 580 (59100) kN (kgf) 667 (68000) kN (kgf) 9.5 mm
RF240-US-1 76.20 mm 47.63 mm 47.63 mm 24.73 mm 151 (15400) kN (kgf) 853 (87000) kN (kgf) 981 (100000) kN (kgf) 12.7 mm

How to choose Chain

Points to check when selecting, with the values for this product (RF100-US-1).

  1. 1. Select a pitch that matches the sprocket

    This product: Pitch P 31.75 mm

    The pitch must match the tooth profile of the sprocket, and different pitches cannot be combined. Listed products range from 31.75 to 76.2 mm. Larger pitches increase power transmission capacity, but they also add mass and cause greater vibration and noise at high rotational speeds, so the choice should be based on both rotational speed and load.

  2. 2. Check the load against the maximum allowable tension

    This product: Maximum allowable tension 39.2 (4000) kN (kgf)

    This is the upper limit of tension that may be applied in actual use. Multiply the chain tension calculated from transmitted power and speed by a service factor that accounts for starting shock and load fluctuation, and confirm that the result is at or below this value. Listed products range from 39.2 to 151 kN, and heavy-duty types have higher values even at the same pitch.

  3. 3. The minimum tensile strength is the guaranteed breaking value

    This product: Minimum tensile strength 149 (15200) kN (kgf)

    The minimum tensile strength is the guaranteed breaking load, and listed products range from 149 to 853 kN. The average tensile strength is a higher mean value than this, so the minimum value is used for strength calculations. It is not used as the basis for working load, but is used to check the safety margin against overload.

  4. 4. Verify the inner link width against the tooth width

    This product: Inner link inner width W 19.05 mm

    The inner link width corresponds to the tooth width of the sprocket. Some heavy-duty types can use sprockets for standard roller chains, but there are cases where cast iron sprockets are not permitted, so the tooth width and material conditions must be checked together.

  5. 5. Check compatibility by roller diameter and pin diameter

    This product: Roller diameter R 19.05 mm

    The roller diameter relates to the tooth bottom shape, and the pin diameter relates to connecting links and wear life. In some cases, successor specifications cannot be connected to previous specifications, so when partially replacing or adding links to an existing chain, dimensions and connectability should be verified against the manufacturer's documentation.

  6. 6. Confirm link count and lead time conditions

    Types without offset links (half links) can only be used with an even number of links, and allowance for adjusting the center distance is required. Also, some large-size products are made to order or quoted on each request, so spare parts procurement timing should be included in planning.

This guide was written by AI based on the listed products' documents and specification items.

About Chain and all products

Description

Single-strand heavy-duty drive chain for ultra-heavy power transmission. No offset link is available; use with an even number of links. Made to order.

Features

  • Made to order
  • No offset link; use with an even number of links
  • Sprockets for RS roller chain can be used; cast iron sprockets cannot be used

Applications

  • Heavy-duty power transmission

FAQ

Q. Can the RF100-US-1 be assembled with an odd number of links using an offset link?
A. No. There is no offset link, so use an even number of links.
Q. Which sprockets can be combined with the RF100-US-1?
A. Sprockets for RS roller chain can be used. Cast iron sprockets cannot be used.
Q. What are the minimum tensile strength and maximum allowable tension of the RF100-US-1?
A. Minimum tensile strength is 149 kN (15200 kgf) and average tensile strength is 172 kN (17500 kgf). Maximum allowable tension is 39.2 kN (4000 kgf).
Q. What are the dimensions of the RF100-US-1, such as pitch, roller diameter, and inner link inner width?
A. Pitch P is 31.75 mm, roller diameter R is 19.05 mm, inner link inner width W is 19.05 mm, plate thickness T is 4.8 mm, plate height H is 30.1 mm, and pin diameter D is 10.32 mm. Approximate mass is 5.07 kg/m.
Q. What applications is the Ultra Super Chain RF100-US-1 suited for?
A. It is a single-strand heavy-duty drive chain with 31.75 mm pitch, used for heavy-duty power transmission and ultra-heavy power transmission. It is made to order.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Chain products, ordered by similarity of specifications and applications.

More products from Tsubakimoto Chain Co.

See all →