Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing

Specifications

How to choose Rolling Bearings

Points to check when selecting, with the values for this product (Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing).

1. 1. Bore and housing bore dimensions

   This product: Inner diameter d 220～711.2 mm

   Select the bore diameter d to match the shaft seat, the outside diameter D to match the housing bore, and the width B to suit the installation space. Main dimensions are standardized in ISO and JIS dimension series, so interchangeable products can be found by boundary dimension designation. For tapered roller bearings, also check the assembled width T; for thrust bearings, also check the height H.

2. 2. Dynamic load rating based on life calculation

   This product: Basic dynamic load rating Cr 3910～22200 kN

   The basic dynamic load rating Cr is the reference value for calculating rated life. Verify that the required life is met using the equivalent load during operation and the rotational speed. For ball bearings, life is proportional to the cube of the load ratio, so providing load margin greatly extends life.

3. 3. Margin for static and shock loads

   The basic static load rating C0r is the allowable standard for permanent deformation generated at the rolling elements and raceways under stationary or low-speed conditions. For applications with oscillating motion or shock loads, confirm that a static safety factor against the maximum load is secured using C0r.

4. 4. Operating speed and lubrication method

   The limiting speed differs by lubrication method, and separate values are given for grease lubrication and oil lubrication. Confirm that the normal operating speed does not exceed the limiting value, and in high-speed ranges also consider cage material and precision grade. The reference speed can also be consulted as a thermal guideline.

5. 5. Precision grade and internal clearance

   Precision grades (P0, P6, P5, etc.) indicate rotational accuracy and dimensional accuracy; for high-precision applications such as machine tool spindles, select higher grades. Internal clearance (C2, CN, C3, etc.) is selected to allow for changes caused by interference fit and temperature differences during operation.

6. 6. Materials and lubrication suited to the environment

   For corrosive, high-temperature, vacuum, or clean environments, select specifications such as rings and rolling elements made of stainless steel or ceramics, or solid lubricants and fluorine grease for vacuum use. Check the operating temperature range, low dust generation, and whether food-grade grease registration applies against the application conditions.

This guide was written by AI based on the listed products' documents and specification items.

About Rolling Bearings and all products

Description

Sealed four-row tapered roller bearing series used for work rolls and intermediate rolls of cold rolling mills. Covers a wide range of sizes with bore diameters from 220 mm to 711.2 mm.

FAQ

Q. What types of rolling mills can the Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing be used on?

A. It is used in hot rolling mills and cold rolling mills. It is a sealed four-row tapered roller bearing used for work rolls and intermediate rolls of hot and cold rolling mills.

Q. What are the bore and outside diameter ranges of the Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing?

A. The bore diameter d ranges from 220 to 711.2 mm, and the outside diameter D ranges from 295 to 914.4 mm. It covers a wide range of sizes from 220 mm to 711.2 mm in bore diameter.

Q. What are the basic dynamic load rating and mass of the Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing?

A. The basic dynamic load rating Cr is 3910 to 22200 kN, and the mass is 53 to 678 kg.

Q. What are the features of the Roll Neck Bearing, Sealed Four-Row Tapered Roller Bearing?

A. Key features are high precision, high reliability, and water-resistant and scale-resistant sealing.

Written by AI based on the content of the source documents.

Source documents

• Catalog 圧延機ロールネック用軸受 Open page 4
  Found on: https://koyo.jtekt.co.jp/support/catalog-download/