CM085 Compact Compression Load Cell

Specifications

How to choose Load cell

Points to check when selecting, with the values for this product (CM085 Compact Compression Load Cell).

1. 1. Select a capacity with margin above maximum load

   This product: Rated capacity 2～2000 N

   Rated capacity is the maximum load that can be measured; listed products range from 2 to 2000 N. Select based on the maximum value including tare weight and impact loads, with margin to spare. However, an oversized capacity reduces resolution, so confirm that the normal operating load falls within an appropriate proportion of the rated capacity.

2. 2. Match load direction and form to the installation

   The supported load direction (compression, tension, or both) determines the usable applications. Choose the form based on installation space and how the load is applied: single-point type for platform scales with off-center loads, self-aligning compression type for tanks, and low-profile or button types for confined spaces.

3. 3. Compare measurement accuracy by nonlinearity

   This product: Non-linearity 0.08～0.15 %R.O.

   Nonlinearity is the deviation from a straight line relative to rated output; listed products range from 0.023 to 0.15% R.O. Also check hysteresis and repeatability. For trade-use scales, whether the product complies with an accuracy class such as OIML R60 C3 is also a useful criterion.

4. 4. Confirm rated output matches the indicator

   This product: Rated output 1.0±0.5 mV/V

   Rated output is the output per volt of excitation at rated load; listed products range from 1 to 2 mV/V. Verify that the input range, recommended excitation voltage, and input/output resistance of the connected indicator or amplifier are compatible. When using multiple units in parallel, also check that their outputs are matched.

5. 5. Select a protection rating suited to the environment

   For fisheries, food, and beverage lines exposed to water or cleaning fluids, products rated IP68 or hermetic sealing (airtight sealing by welding or similar methods) are suitable. In environments with only dust, IP64 may be sufficient. Also confirm the operating temperature range.

6. 6. Judge corrosion resistance by strain body material

   Strain body materials include aluminum alloy, alloy steel, and stainless steel. For corrosive environments or applications with frequent washdown, all-stainless-steel construction is preferable. Where impact is expected, also check the allowable overload value and whether overload stoppers are fitted.

This guide was written by AI based on the listed products' documents and specification items.

About Load cell and all products

Description

Height 9.5 mm, diameter φ29 (2 N to 200 N) and φ34 (500 N to 2 kN). 3 m cable direct connection. Strain body made of aluminum alloy or stainless steel.

FAQ

Q. What are the external dimensions and rated capacity range of the CM085 Compact Compression Load Cell?

A. The height is 9.5 mm and the diameter is φ29 (2 N to 200 N) and φ34 (500 N to 2 kN). The rated capacity is 2 to 2000 N.

Q. What material is used for the strain body of the CM085 Compact Compression Load Cell?

A. The strain body is made of aluminum alloy or stainless steel.

Q. What are the mounting method and features of the CM085 Compact Compression Load Cell?

A. It can be screw-mounted with a stopper. It has a low-profile design, with a height of 9.5 mm.

Q. What are the cable length and output specifications of the CM085 Compact Compression Load Cell?

A. The cable length is 3 m with direct connection. The rated output is 1.0±0.5 mV/V.

Q. What are the non-linearity and hysteresis values of the CM085 Compact Compression Load Cell?

A. Non-linearity is 0.08 to 0.15 %R.O. and hysteresis is 0.08 to 0.15 %R.O.

Written by AI based on the content of the source documents.

Source documents

• Catalog 製品ガイダンス 計測・計装用各種センサー・機器類 24 pages
  Found on: https://azuma-eg.com/catalogue/