Minebea Mitsumi Inc.

CB004W Load Cell

Model: CB004W

Single-point load cell with all-stainless steel hermetically sealed construction. For marine scales and bottling machines.

Minebea Mitsumi Inc.

CC010 Series High-Precision Double Convex Compression Load Cell

Self-aligning compression load cell for hopper and tank scales. All-stainless-steel hermetically sealed construction, OIML C3 compliant.

Minebea Mitsumi Inc.

CM085 Compact Compression Load Cell

Low-profile, compact compression load cell. Screw mounting possible with stopper.

Minebea Mitsumi Inc.

CSD-709 Digital Peak Holder

Model: CSD-709

Digital peak holder with 4000 samples/s high-speed sampling and a variety of hold functions.

Minebea Mitsumi Inc.

CSD-892 Series Digital Conversion Module

Model: CSD-892

Compact digital conversion module for DIN rail mounting. Features high-speed sampling and standard USB.

Minebea Mitsumi Inc.

CSD-912 Graphic Digital Indicator

Model: CSD-912

Graphic display indicator with touch panel. Capable of graph display of weighing status.

Minebea Mitsumi Inc.

NS310 SOS-Type Amplified Pressure Gauge

Model: NS310

High-accuracy amplified pressure gauge with overall accuracy of ±0.2% F.S. Compensates temperature errors to reduce output error.

Minebea Mitsumi Inc.

Digital Transmitter CSD-592

Model: CSD-592

High-response, low-cost digital transmitter. Supports control and operation management.

Minebea Mitsumi Inc.

Digital Transmitter CSD-594

Model: CSD-594

Compact digital transmitter supporting high-speed digital output. Up to 16 units can be connected in parallel.

Minebea Mitsumi Inc.

Digital Moment Limiter DML-802B

Model: DML-802B

A moment limiter that calculates suspended load from load cell and jib angle to prevent overload.

Minebea Mitsumi Inc.

Digital Indicator for Digital Load Cell CSD-401

Model: CSD-401

Compact digital indicator for load cell connection. Connects up to 6 units.

Minebea Mitsumi Inc.

Digital Conversion Module CSD-892

Model: CSD-892-07-25/73/74/76

Compact digital conversion module for DIN rail mounting. Supports high-speed sampling.

Minebea Mitsumi Inc.

Digital Indicator CSD-891B

Model: CSD-891B

A compact digital indicator for installation inside control panels. Offers a wide range of interfaces for connection to PLCs and other equipment.

Minebea Mitsumi Inc.

Digital Indicator TSD-591

Model: TSD-591

Digital indicator dedicated to tie bar gauges. Supports simultaneous display of 4 channels.

Minebea Mitsumi Inc.

Tension Meter Digital Indicator TMD-100

Model: TMD-100

A tension meter indicator that connects two load cells and displays individual, sum, and difference calculations.

Minebea Mitsumi Inc.

Transmitter CSA-503C

Model: CSA-503C

Transmitter with built-in remote sensing circuit. Auto-zero function is sold separately.

Minebea Mitsumi Inc.

Transmitter CSA-591/CSA-592

Model: CSA-591/CSA-592

Transmitter with analog voltage output. Equipped with auto-zero function.

Minebea Mitsumi Inc.

Transmitter CSA-593

Model: CSA-593

Compact transmitter with improved noise resistance. For tie-bar gauges.

Minebea Mitsumi Inc.

Torque Converter Dedicated Transmitter OPT-563B

Model: OPT-563B

Transmitter for optical transmission type torque converters. Stores calibration data for four units and allows switching between them.

Minebea Mitsumi Inc.

Torsion Tester TT-2kNM

Model: TT-2kNM

Horizontal torsion tester that allows easy workpiece mounting. Capable of outputting torque and angle.

Minebea Mitsumi Inc.

Torsion Testing Machine TT-50NM-021

Model: TT-50NM-021

Desktop vertical torsion testing machine with simple operation. High-precision torque detection with in-house torque meter.

Minebea Mitsumi Inc.

Vector Sensor MX020-10N

Model: MX020-10N

A compact vector sensor that simultaneously detects forces in three directions.

Minebea Mitsumi Inc.

Transmitter for Rotary Transformer Torque Transducer CSA-561B

Model: CSA-561B

Torque transducer transmitter with isolated input and output. Equivalent strain is set using a 4-digit digital switch.

Minebea Mitsumi Inc.

Optical Transmission Type Transmitter for Torque Converter CSA-562B

Model: CSA-562B

Optical transmission type transmitter for torque converters with a 4 1/2-digit digital monitor.

Minebea Mitsumi Inc.

Dynamic Strain Measuring Instrument DAS-406C

Model: DAS-406C

DC amplification type dynamic strain measuring instrument. Frequency response from DC to 200 kHz.

Minebea Mitsumi Inc.

Dynamic Strain Measuring Instrument DSA-631

Model: DSA-631

Dynamic strain measuring instrument using carrier amplification method. Equipped with line length correction and disconnection check functions.

Minebea Mitsumi Inc.

Board-Type Digital Indicator CSD-581

Model: CSD-581-15/74

A one-board digital indicator with a simple form factor. High accuracy and high resolution.

Minebea Mitsumi Inc.

Printed Circuit Board Type Transmitter CSA-504S

Model: CSA-504S

A printed circuit board type transmitter available in two types: 1ch (CSA-504S-1B) and 4ch (CSA-504SB).

Minebea Mitsumi Inc.

Printed Circuit Board Type Transmitter CSA-521

Model: CSA-521

Compact, lightweight, low-cost printed circuit board type transmitter.

Minebea Mitsumi Inc.

Board-Type Transmitter CSA-524

Model: CSA-524

Printed circuit board type transmitter with analog output support.

Minebea Mitsumi Inc.

Board-Type Transmitter CSA-528

Model: CSA-528

A board-type transmitter powered by DC24V that saves space when used with multiple channels.

Minebea Mitsumi Inc.

Compact Transmitter CSA-507C

Model: CSA-507C

Compact, lightweight, and simple low-cost transmitter.

Minebea Mitsumi Inc.

Compact Compression-Type Force Sensor LSMS Series / Mold Internal Pressure Measuring Instrument MPC-201-25

Model: MPC-201-25

A measurement system that measures and records mold internal pressure waveforms of injection molding machines. Supports real-time waveform display.

Minebea Mitsumi Inc.

Tensile and Compression Testing Machine TGE Series (Technograph)

Lightweight and compact tensile and compression testing machine, reducing weight by 50 kg and width by 100 mm compared with conventional models.

Minebea Mitsumi Inc.

Tensile and Compression Testing Machine TGI Series (Technograph)

Benchtop tensile and compression testing machine with load cell capacities from 0.05 N to 250 kN. High accuracy and simple operation.

Minebea Mitsumi Inc.

Strain Calibrator PSC-350

Model: PSC-350

A 350Ω calibration strain generator. Used for output calibration of strain gauge transducers.

Minebea Mitsumi Inc.

Load Measuring Instrument LTS-NB

Model: LTS-50NB/-200NB/-500NB/-1kNB

Desktop load measuring instrument compliant with JIS B 7721, featuring a ball screw drive. Capable of tensile, compression, and bending tests.

Minebea Mitsumi Inc.

Static Strain Meter PSD-704

Model: PSD-704

A portable static strain meter that allows easy verification of strain gauge transducer output in mV/V units.

Minebea Mitsumi Inc.

High-Response Transmitter CSA-522B

Model: CSA-522B

A high-response DC amplifier used for measuring load, pressure, torque and other quantities.

Minebea Mitsumi Inc.