Digital Indicator TSD-591

Specifications

How to choose Digital indicator

Points to check when selecting, with the values for this product (TSD-591).

1. 1. Input range matching sensor output

   Confirm that the rated output (mV/V) of the strain-gauge sensor falls within the input range of the indicator. If the range is too wide, the resolution cannot be fully utilized; if too narrow, the input saturates. Check against the rated output in the load cell's calibration certificate.

2. 2. Bridge excitation and number of connected sensors

   This product: Bridge power supply DC2 V±0.02 V, within 35 mA

   Confirm that the excitation voltage supplied to the sensor is at or below the sensor's recommended excitation voltage. When multiple load cells are connected in parallel, the combined resistance decreases and current increases, so also check whether the indicator can supply the required load conditions.

3. 3. Sampling speed suited to the process speed

   This product: A/D sampling rate 16 回/s

   In processes where the load changes over a short time, such as press-fitting, pressing, or punching, a slow A/D sampling rate may miss peak values. For static weighing, a low speed is sufficient. Note that this value is different from the display update rate (display refresh count).

4. 4. Required display digits and resolution

   Determine the required number of display digits from the capacity and minimum scale division, and confirm that the display range meets them. Check not only the display resolution but also whether the actual measurement accuracy, including non-linearity (0.02% F.S. for the listed products), meets the requirement.

5. 5. Mounting method and external dimensions

   Confirm that the panel cutout dimensions and depth fit the panel or enclosure. Select the mounting method as well, such as DIN rail type for installation inside a control panel or board type for equipment integration. Also check the required outputs and communication options, such as CC-Link, RS-232C, or BCD, at the same time.

6. 6. Power supply type and power consumption

   This product: Power supply voltage AC90~132 V (when using AC adapter)

   Check whether AC or DC power is required, whether wide-range power input is supported, and whether battery operation is possible, according to the installation environment. Power consumption of the listed products ranges from 2.4 to 25 W, which is used for evaluating the power capacity and heat generation inside the panel.

This guide was written by AI based on the listed products' documents and specification items.

About Digital indicator and all products

Description

Suitable for balance adjustment and similar tasks, with battery operation and one-touch zero adjustment supported.

FAQ

Q. What applications can the TSD-591 be used for?

A. It is used for tie bar management on injection molding machines and press machines. It is a digital indicator dedicated to tie bar gauges and is suitable for balance adjustment and similar tasks.

Q. What are the features and drive method of the TSD-591?

A. It supports simultaneous display of 4 channels and battery operation. One-touch zero adjustment is also supported.

Q. What are the bridge power supply and power voltage specifications of the TSD-591?

A. The bridge power supply is DC 2 V ±0.02 V, within 35 mA. The power voltage when using the AC adapter is AC 90 to 132 V.

Q. What are the A/D sampling rate and mass of the TSD-591?

A. The A/D sampling rate is 16 times/s. The mass is 1.8 kg.

Written by AI based on the content of the source documents.

Source documents

• Catalog 製品ガイダンス 計測・計装用各種センサー・機器類 24 pages
  Found on: https://azuma-eg.com/catalogue/