Catalog Searcher
Categories
🌐 English

SSP-15120

Model SSP-15120 / エコノミータイプ / Sigma Giken Co., Ltd. (Official website) / Listed on page 5 of the document

Economy turntable with a 1200 mm turntable diameter and 1500 kg maximum load, intended for simple packaging. Operated by foot switch.

Last verified: (date the content was verified against the source document)

SSP-15120 on page 5 of Sigma Giken Co., Ltd. "シグマストレッチフィルム包装機カタログ"
Source: Sigma Giken Co., Ltd.「シグマストレッチフィルム包装機カタログ」page 5
A reduced image of the relevant page is quoted from the document. Copyright belongs to Sigma Giken Co., Ltd..Request removal

Specifications

Recommended pallet size 1100 mm角
Maximum load 1500 kg
Turntable Diameter 1200 mm
Maximum diagonal length of workpiece 1600 mm
Table Rotation Speed 0 to 9 rpm
Power supply used Single-phase AC100V
Drive motor output 0.2 kW
Power Consumption 140 W
External dimensions 1200×1200×180 mm
Body Mass 180 kg
Standard price 670000 円

エコノミータイプ model comparison

Compare 4 models in the same series by specification.

Model Maximum load Turntable Diameter Maximum diagonal length of workpiece Power supply used Recommended pallet size Table Rotation Speed Drive motor output Power Consumption
SSP-05090 500 kg 900 mm 1300 mm Single-phase AC100V 900 mm角 0 to 15 rpm 0.1 kW 70 W
SSP-10120 1000 kg 1200 mm 1600 mm Single-phase AC100V 1100 mm角 0 to 9 rpm 0.2 kW 140 W
SSP-15120 This product 1500 kg 1200 mm 1600 mm Single-phase AC100V 1100 mm角 0 to 9 rpm 0.2 kW 140 W
SSP-15150 1500 kg 1500 mm 1700 mm Single-phase AC100V 1200 mm角 0 to 9 rpm 0.2 kW 170 W

How to choose Stretch Film Packaging Machines

Points to check when selecting, with the values for this product (SSP-15120).

  1. 1. Select by Load and Pallet Mass

    This product: Maximum load 1500 kg

    The maximum load is the combined mass of the load and pallet placed on the turntable. Listed models range from 500 to 1500 kg. Select with a margin for the heaviest load configuration. Exceeding the upper limit causes unstable rotation and places strain on the drive section.

  2. 2. Check the Load Diagonal Length

    This product: Maximum diagonal length of workpiece 1600 mm

    The outer circumference of the rotating load is determined by its diagonal length. Check that the maximum load diagonal length (1300 to 1700 mm for listed models) is equal to or greater than the diagonal dimension of the load configuration, including any overhang from the pallet. If the diagonal length is insufficient, the load will contact the mast during rotation.

  3. 3. Turntable Diameter to Match Pallet Size

    This product: Turntable Diameter 1200 mm

    The turntable diameter ranges from 900 to 1500 mm. Select it to suit the corner dimensions of the pallet used (recommended pallet size 900 to 1200 mm). If the pallet overhangs the table significantly, the load will be unstable.

  4. 4. Load Height and Compatible Film Width

    The maximum load height is 1900 mm for listed models. Load configurations exceeding this height cannot be wrapped at the top. The film width used is 500 mm, so confirm that existing or planned film stock matches this width.

  5. 5. Loading Method and Table Height

    At sites using forklifts, models with forklift pocket openings are convenient for relocation. At sites with only a hand lift, selecting the low-profile model with a 25 mm table height allows loading and unloading without a ramp.

  6. 6. Check the Power Supply at the Installation Site

    This product: Power supply used Single-phase AC100V

    Power specifications such as phase and voltage vary by model. Models supporting single-phase AC100V can be used with a standard outlet. Power consumption ranges from 70 to 170 W. Verify the power specifications and capacity of the planned installation site in advance.

This guide was written by AI based on the listed products' documents and specification items.

About Stretch Film Packaging Machines and all products

Description

A low-priced model with a reduced number of parts. Film holder is not included. Standard price is 670,000 yen.

Features

  • Foot switch operation
  • Equipped with forklift pocket insertion slots
  • Movable by forklift

Applications

  • Simple packaging
  • Prevention of load collapse

FAQ

Q. What are the recommended pallet size and maximum load for the SSP-15120?
A. The recommended pallet size is 1100 mm square, and the maximum load is 1500 kg.
Q. What is the turntable diameter and maximum diagonal length of the load for the SSP-15120?
A. The turntable diameter is 1200 mm, and the maximum diagonal length of the load is 1600 mm.
Q. What is the power supply and power consumption of the SSP-15120?
A. The power supply is single-phase AC100V, and power consumption is 140 W. The drive motor output is 0.2 kW.
Q. Can the SSP-15120 be moved by forklift?
A. Yes, it can be moved by forklift. It also has lift fork insertion slots.
Q. What applications is the SSP-15120 suited for?
A. It is suited for simple packaging and prevention of load collapse. It is operated with a foot switch.

Written by AI based on the content of the source documents.

Source documents

More products from Sigma Giken Co., Ltd.

See all →