Catalog Searcher
Categories
🌐 English

SSP-15150

Model SSP-15150 / エコノミータイプ / Sigma Giken Co., Ltd. (Official website) / Listed on page 5 of the document

Economy turntable with a 1500 mm table diameter and 1500 kg maximum load, designed for simple packaging. Operated by foot switch.

Last verified: (date the content was verified against the source document)

SSP-15150 on page 5 of Sigma Giken Co., Ltd. "シグマストレッチフィルム包装機カタログ"
Source: Sigma Giken Co., Ltd.「シグマストレッチフィルム包装機カタログ」page 5
A reduced image of the relevant page is quoted from the document. Copyright belongs to Sigma Giken Co., Ltd..Request removal

Specifications

Recommended pallet size 1200 mm角
Maximum load 1500 kg
Turntable Diameter 1500 mm
Maximum diagonal length of workpiece 1700 mm
Table Rotation Speed 0 to 9 rpm
Power supply used Single-phase AC100V
Drive motor output 0.2 kW
Power Consumption 170 W
External dimensions 1500×1500×180 mm
Body Mass 230 kg
Standard price 830000 円

エコノミータイプ model comparison

Compare 4 models in the same series by specification.

Model Maximum load Turntable Diameter Maximum diagonal length of workpiece Power supply used Recommended pallet size Table Rotation Speed Drive motor output Power Consumption
SSP-05090 500 kg 900 mm 1300 mm Single-phase AC100V 900 mm角 0 to 15 rpm 0.1 kW 70 W
SSP-10120 1000 kg 1200 mm 1600 mm Single-phase AC100V 1100 mm角 0 to 9 rpm 0.2 kW 140 W
SSP-15120 1500 kg 1200 mm 1600 mm Single-phase AC100V 1100 mm角 0 to 9 rpm 0.2 kW 140 W
SSP-15150 This product 1500 kg 1500 mm 1700 mm Single-phase AC100V 1200 mm角 0 to 9 rpm 0.2 kW 170 W

How to choose Stretch Film Packaging Machines

Points to check when selecting, with the values for this product (SSP-15150).

  1. 1. Select by Load and Pallet Mass

    This product: Maximum load 1500 kg

    The maximum load is the combined mass of the load and pallet placed on the turntable. Listed models range from 500 to 1500 kg. Select with a margin for the heaviest load configuration. Exceeding the upper limit causes unstable rotation and places strain on the drive section.

  2. 2. Check the Load Diagonal Length

    This product: Maximum diagonal length of workpiece 1700 mm

    The outer circumference of the rotating load is determined by its diagonal length. Check that the maximum load diagonal length (1300 to 1700 mm for listed models) is equal to or greater than the diagonal dimension of the load configuration, including any overhang from the pallet. If the diagonal length is insufficient, the load will contact the mast during rotation.

  3. 3. Turntable Diameter to Match Pallet Size

    This product: Turntable Diameter 1500 mm

    The turntable diameter ranges from 900 to 1500 mm. Select it to suit the corner dimensions of the pallet used (recommended pallet size 900 to 1200 mm). If the pallet overhangs the table significantly, the load will be unstable.

  4. 4. Load Height and Compatible Film Width

    The maximum load height is 1900 mm for listed models. Load configurations exceeding this height cannot be wrapped at the top. The film width used is 500 mm, so confirm that existing or planned film stock matches this width.

  5. 5. Loading Method and Table Height

    At sites using forklifts, models with forklift pocket openings are convenient for relocation. At sites with only a hand lift, selecting the low-profile model with a 25 mm table height allows loading and unloading without a ramp.

  6. 6. Check the Power Supply at the Installation Site

    This product: Power supply used Single-phase AC100V

    Power specifications such as phase and voltage vary by model. Models supporting single-phase AC100V can be used with a standard outlet. Power consumption ranges from 70 to 170 W. Verify the power specifications and capacity of the planned installation site in advance.

This guide was written by AI based on the listed products' documents and specification items.

About Stretch Film Packaging Machines and all products

Description

A low-cost model with a reduced number of components. Film holder not included. Standard price: 830,000 yen.

Features

  • Foot switch operation
  • Equipped with lift fork insertion slots
  • Movable by forklift

Applications

  • Simple packaging
  • Prevention of load collapse

FAQ

Q. What are the table diameter and maximum load of the SSP-15150?
A. The table diameter is 1500 mm and the maximum load is 1500 kg.
Q. What is the approximate size of loads that can be handled by the SSP-15150?
A. The recommended pallet size is 1200 mm square. The maximum diagonal length of the load is 1700 mm.
Q. What are the power supply and table rotation speed of the SSP-15150?
A. The power supply is single-phase AC 100 V. The table rotation speed is 0 to 9 rpm. The drive motor output is 0.2 kW and the power consumption is 170 W.
Q. How is the SSP-15150 operated and moved during installation?
A. It is operated by foot switch. It can be moved by forklift and has lift fork insertion slots.
Q. What are the external dimensions and body mass of the SSP-15150?
A. The external dimensions are 1500 × 1500 × 180 mm and the body mass is 230 kg.

Written by AI based on the content of the source documents.

Source documents

More products from Sigma Giken Co., Ltd.

See all →