SSP-15150-AMPS

Specifications

SSP-15150-AM 半自動機タイプ model comparison

Compare 4 models in the same series by specification.

How to choose Stretch Film Packaging Machines

Points to check when selecting, with the values for this product (SSP-15150-AMPS).

1. 1. Select by Load and Pallet Mass

   This product: Maximum load 1500 kg

   The maximum load is the combined mass of the load and pallet placed on the turntable. Listed models range from 500 to 1500 kg. Select with a margin for the heaviest load configuration. Exceeding the upper limit causes unstable rotation and places strain on the drive section.

2. 2. Check the Load Diagonal Length

   This product: Maximum diagonal length of workpiece 1700 mm

   The outer circumference of the rotating load is determined by its diagonal length. Check that the maximum load diagonal length (1300 to 1700 mm for listed models) is equal to or greater than the diagonal dimension of the load configuration, including any overhang from the pallet. If the diagonal length is insufficient, the load will contact the mast during rotation.

3. 3. Turntable Diameter to Match Pallet Size

   This product: Turntable Diameter 1500 mm

   The turntable diameter ranges from 900 to 1500 mm. Select it to suit the corner dimensions of the pallet used (recommended pallet size 900 to 1200 mm). If the pallet overhangs the table significantly, the load will be unstable.

4. 4. Load Height and Compatible Film Width

   This product: Maximum height of package 1900 mm

   The maximum load height is 1900 mm for listed models. Load configurations exceeding this height cannot be wrapped at the top. The film width used is 500 mm, so confirm that existing or planned film stock matches this width.

5. 5. Loading Method and Table Height

   At sites using forklifts, models with forklift pocket openings are convenient for relocation. At sites with only a hand lift, selecting the low-profile model with a 25 mm table height allows loading and unloading without a ramp.

6. 6. Check the Power Supply at the Installation Site

   This product: Power supply used Three-phase AC200V 20A

   Power specifications such as phase and voltage vary by model. Models supporting single-phase AC100V can be used with a standard outlet. Power consumption ranges from 70 to 170 W. Verify the power specifications and capacity of the planned installation site in advance.

This guide was written by AI based on the listed products' documents and specification items.

About Stretch Film Packaging Machines and all products

Description

Equipped with a film static eliminator function, and with lift fork insertion slots for easy movement. Table rotation 0 to 9 rpm, film up/down speed 0 to 3.5 m/min (variable). Standard price 2,020,000 yen.

FAQ

Q. What are the maximum load and turntable diameter of the SSP-15150-AMPS?

A. The maximum load is 1500 kg and the turntable diameter is 1500 mm.

Q. What are the maximum dimensions of loads that the SSP-15150-AMPS can wrap?

A. The maximum diagonal length of the load is 1700 mm, and the maximum height of the wrapped package is 1900 mm.

Q. How are film tension and load height detected on the SSP-15150-AMPS?

A. Film tension is controlled by a powder brake system, and load height is detected automatically by a photoelectric sensor.

Q. What are the power supply, drive motor output, and machine mass of the SSP-15150-AMPS?

A. The power supply is three-phase AC 200 V 20 A, the drive motor output is 0.4 kW for the turntable and 0.1 kW for film up/down, and the machine mass is 400 kg.

Q. What are the ranges of table rotation speed and film up/down speed of the SSP-15150-AMPS?

A. Table rotation speed is 0 to 9 rpm, and film up/down speed is 0 to 3.5 m/min, both variable.

Written by AI based on the content of the source documents.

Source documents

• Catalog シグマストレッチフィルム包装機カタログ 6 pages Open page 3
  Found on: https://www.sigma-giken.co.jp/catalogue-list.html