Catalog Searcher
Categories

Oil Injector 226400 E Series

Model 226400 E / 226400 E / SKF (Official website) / Listed on page 67 of the document

Oil injector rated for 300 MPa/400 MPa, housed in a compact carrying case.

Last verified: (date the content was verified against the source document)

Oil Injector 226400 E Series on page 67 of SKF "SKFメンテナンス製品と潤滑製品"
Source: SKF「SKFメンテナンス製品と潤滑製品」page 67
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Maximum Pressure 300 / 400 MPa
Discharge volume per stroke 0.23 cm3
Oil tank capacity 200 cm3
Connection Thread G3/4

How to choose Hydraulic Tools

Points to check when selecting, with the values for this product (226400 E).

  1. 1. Match the mating thread standard

    Hydraulic nuts are screwed onto the thread of a shaft or sleeve, so they cannot be fitted if the thread form does not match. Confirm whether the thread is metric or inch, and select a product whose specification, including pitch, matches the mating thread standard.

  2. 2. Select the size for the nominal thread diameter

    Hydraulic nuts are sized by nominal thread diameter. Identify the corresponding nominal thread diameter from the bearing bore or the model number of the adapter sleeve or withdrawal sleeve, and select a product whose thread diameter range includes that diameter.

  3. 3. Check the applicable shaft diameter

    The listed products have applicable shaft diameters of 50 to 1000 mm. Confirm that the shaft on which the bearing or sleeve will be mounted falls within the nut's applicable range. Larger-diameter types have larger and heavier bodies.

  4. 4. Match pump pressure and maximum hydraulic pressure

    The listed products have a maximum hydraulic pressure of 60 to 80 MPa. Confirm that the rated pressure of the hydraulic pump, hose and coupler used in combination matches the nut's maximum hydraulic pressure. Pressing force is determined by the product of piston area and hydraulic pressure.

  5. 5. Required press-in amount and stroke

    With tapered fits, the bearing must be pushed in a set distance. Confirm that the required press-in amount falls within the piston travel, and allow for the work of retracting the nut and re-threading it if the travel is insufficient.

  6. 6. Prepare handling means for the mass

    The listed products have a mass of 19 to 136 kg. Large sizes are difficult to hold by hand, so confirm whether eyebolts are provided and prepare slings or a crane. The presence of accessories such as tommy bars and thread lubricant also affects workability.

This guide was written by AI based on the listed products' documents and specification items.

About Hydraulic Tools and all products

Description

Stored in a carrying case together with the oil tank. Can be mounted directly on the target component or used on the floor via an adapter block.

Features

  • Easy operation
  • Compact carrying case
  • Unused oil returns to the tank after pressure release

Applications

  • Mounting using the SKF oil injection method
  • Large bearings, gears, railway wheels

FAQ

Q. What components can the 226400 E be used to mount?
A. It can be used to mount large bearings, gears, and railway wheels. It supports mounting using the SKF oil injection method.
Q. How is the 226400 E installed on the target component?
A. It can be mounted directly on the target component or used on the floor via an adapter block. It is stored in a carrying case together with the oil tank.
Q. What are the maximum pressure and discharge volume per stroke of the 226400 E?
A. The maximum pressure is 300 / 400 MPa. The discharge volume per stroke is 0.23 cm3.
Q. What are the oil tank capacity and connection thread of the 226400 E?
A. The oil tank capacity is 200 cm3. The connection thread is G3/4.
Q. How does the 226400 E handle unused oil?
A. Unused oil returns to the tank after pressure release.

Written by AI based on the content of the source documents.

Source documents

More products from SKF

See all →