SKF Quiet Running Deep Groove Ball Bearing (VQ658)
Model VQ658 / 風力タービン発電機向け静粛運転軸受 / SKF (Official website) / Listed on page 16 of the document
A quiet running deep groove ball bearing for demanding noise requirements such as wind turbine generators.
Last verified: (date the content was verified against the source document)
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal
How to choose Rolling Bearings
Points to check when selecting, with the values for this product (VQ658).
-
1. Bore and housing bore dimensions
Select the bore diameter d to match the shaft seat, the outside diameter D to match the housing bore, and the width B to suit the installation space. Main dimensions are standardized in ISO and JIS dimension series, so interchangeable products can be found by boundary dimension designation. For tapered roller bearings, also check the assembled width T; for thrust bearings, also check the height H.
-
2. Dynamic load rating based on life calculation
The basic dynamic load rating Cr is the reference value for calculating rated life. Verify that the required life is met using the equivalent load during operation and the rotational speed. For ball bearings, life is proportional to the cube of the load ratio, so providing load margin greatly extends life.
-
3. Margin for static and shock loads
The basic static load rating C0r is the allowable standard for permanent deformation generated at the rolling elements and raceways under stationary or low-speed conditions. For applications with oscillating motion or shock loads, confirm that a static safety factor against the maximum load is secured using C0r.
-
4. Operating speed and lubrication method
The limiting speed differs by lubrication method, and separate values are given for grease lubrication and oil lubrication. Confirm that the normal operating speed does not exceed the limiting value, and in high-speed ranges also consider cage material and precision grade. The reference speed can also be consulted as a thermal guideline.
-
5. Precision grade and internal clearance
Precision grades (P0, P6, P5, etc.) indicate rotational accuracy and dimensional accuracy; for high-precision applications such as machine tool spindles, select higher grades. Internal clearance (C2, CN, C3, etc.) is selected to allow for changes caused by interference fit and temperature differences during operation.
-
6. Materials and lubrication suited to the environment
For corrosive, high-temperature, vacuum, or clean environments, select specifications such as rings and rolling elements made of stainless steel or ceramics, or solid lubricants and fluorine grease for vacuum use. Check the operating temperature range, low dust generation, and whether food-grade grease registration applies against the application conditions.
This guide was written by AI based on the listed products' documents and specification items.
Description
A quiet running deep groove ball bearing designated by the suffix VQ658. Delivers stable performance regardless of operating conditions. The product range covers bearing dimensions commonly used in wind turbine generators.
Features
- Compliance with noise requirements
- Stable operating performance
Applications
- Wind turbine generators
FAQ
- Q. What applications is the SKF Quiet Running Deep Groove Ball Bearing VQ658 suitable for?
- A. It is a quiet running deep groove ball bearing that meets demanding noise requirements, such as those in wind turbine generators. It covers bearing dimensions commonly used in wind turbine generators.
- Q. What features does the quiet running specification of VQ658 have?
- A. It complies with noise requirements and delivers stable operating performance regardless of operating conditions.
Written by AI based on the content of the source documents.
Source documents
-
Catalog
SKF 深溝玉軸受 製品カタログ(設計およびバリエーション)
126 pages Open page 16
Found on: https://azuma-eg.com/catalogue/
Similar products (other manufacturers)
Rolling Bearings products, ordered by similarity of specifications and applications.
-
Rolling Bearings
EXSEV Bearings / Ceramic Bearings
Technical data sheet for EXSEV bearings and ceramic bearings specifying tolerances and internal clearances of radial ball bearings.
JTEKT Corporation
-
Rolling Bearings
BB-LFT Low-Torque Ball Bearing (Differential Pinion Use, Single-Row and Double-Row, Low-Torque Deep Groove Ball Bearing with High Axial Load Capability)
A low-torque ball bearing applying the oil flow control structure of ultra-low-torque tapered roller bearings. Used in applications such as differential pinions.
JTEKT Corporation
-
Rolling Bearings
Bearee™ Resin Rolling Bearing (FL3307 Bearing)
A rolling bearing with inner and outer rings and cage made of resin materials offering corrosion resistance and self-lubricating properties. Suitable for environments where steel bearings cannot be used, such as underwater or in chemical solutions.
NTN Corporation
-
Rolling Bearings
Non-Separable Race-Integrated Thrust Needle Roller Bearing
A non-separable thrust needle roller bearing in which the cage is retained by the ribs of a steel plate race.
NTN Corporation
-
Rolling Bearings
Bearing for Gyroscopes
Small-diameter precision ball bearings used for the rotor shaft and gimbal shaft of gyroscopes. Features low starting torque and stable rotation, with cage and grease design minimizing torque variation.
NSK
-
Springs
Super Spring Kit
A kit containing springs from the K, D, and DS series. A selection set for prototype design and jig and fixture maintenance.
KS Industries Co., Ltd.
More products from SKF
See all →-
Rolling Bearings
SKF Explorer Deep Groove Ball Bearing
A high-performance single-row deep groove ball bearing with reduced friction, noise and vibration, and extended service life. It uses the same designation system as conventional standard bearings and is marked with an asterisk in product tables.
SKF
-
Rolling Bearings
SKF E2 Energy-Efficient Deep Groove Ball Bearing
Energy-efficient deep groove ball bearing that reduces friction torque by more than 30% compared with the SKF Explorer bearing of the same dimensions.
SKF
-
Rolling Bearings
SKF Single-Row Deep Groove Ball Bearings (Boundary Dimensions d 3–10 mm)
A series of small-bore single-row deep groove ball bearings with bore diameters of 3 to 10 mm. Outside diameter, width, basic load ratings, and limiting speeds are listed for each bearing number.
SKF
-
Rolling Bearings
Single-Row Deep Groove Ball Bearings
A series of single-row deep groove ball bearings with bore diameters of 12 to 240 mm. Basic load ratings, limiting speeds, mass and other data can be compared by bore, outside diameter and width.
SKF
-
Rolling Bearings
Sealed Single-Row Deep Groove Ball Bearings
A series of sealed deep groove ball bearings with bore diameters from 3 to 15 mm, covering small to medium sizes. Specifications are listed for each seal type, such as Z and RS.
SKF
-
Rolling Bearings
Sealed Single-Row Deep Groove Ball Bearings (2RZ, 2RS1, 2Z Seals) d 80–160 mm
A series of sealed single-row deep groove ball bearings with bore diameters of 80–160 mm. Fitted with contact seals and shields, with dimensions, basic load ratings, limiting speeds and masses shown for each bearing number.
SKF