Machine Tools & Tools

FH1600SW5i

Model: FH1600SW5i

A large horizontal machining center for machining large components. Equipped with a smartphone-style operation panel.

JTEKT Corporation

FH1250SX

Model: FH1250SX

Large horizontal machining center suited to machining large components such as wind turbine gearbox housings. Rapid traverse speed is the fastest in its class.

JTEKT Corporation

Roll Phase Adjustment Device (for Bar Steel Rolling Mill)

A device that arbitrarily adjusts the rotational phase of rolls in a bar steel rolling mill. Enables nearly stepless adjustment in a short time.

JTEKT Corporation

Wafer Double-Sided Surface Grinder DXSG320

Model: DXSG320

A fully automated 300 mm wafer double-disc surface grinder that integrates double-sided lapping and single-sided grinding in one machine.

JTEKT Corporation

Trackfast TF1200JQ

Model: TF1200JQ

A gas-powered nailer that drives fasteners directly into concrete. Requires no compressor and features a cooling fan and battery OFF function.

Japan Power Fastening Corporation

SKF Vibracon Adjustment Tool

A dedicated tool for safely and conveniently adjusting the height of SKF Vibracon chocks.

SKF

Extension Tube / Connection Nipple

Model: 234064/50MPA ほか

Extension tube for connecting a hydraulic pump to adapter sleeves or removal sleeves. Compatible with M4, M6, G1/8, and G1/4.

SKF

High-Pressure Hose Replacement Kit for Oil Injector

Model: 729101-CK1 / THAP 300-HK1 / THAP 400-HK1

A kit that replaces old high-pressure pipes with high-pressure hoses. Can be retrofitted to existing oil injectors.

SKF

OK Coupling Mounting and Dismounting Kit

Model: TMHK 36 / TMHK 37S / TMHK 37E / TMHK 38 / TMHK 38S / TMHK 39 / TMHK 40 / TMHK 41

A kit combining hydraulic pumps and injectors for mounting and dismounting OK couplings.

SKF

Air-Driven Hydraulic Pump / Oil Injector THAP E Series

Hydraulic pump or oil injector driven by an air motor. Available in four pressure ratings and used for installing large couplings.

SKF

Oil Injector 226400 E Series

Model: 226400 E

Oil injector rated for 300 MPa/400 MPa, housed in a compact carrying case.

SKF

Manual Hydraulic Pump THHP 300

Model: THHP 300

High-pressure two-stage manual hydraulic pump for oil injection up to 300 MPa.

SKF

Hydraulic Pump 728619 E

Model: 728619 E

Two-stage manual hydraulic pump for installing SuperGrip bolts and oil injection up to 150 MPa.

SKF

Hydraulic Pump TMJL 100

Model: TMJL 100

Manual hydraulic pump for use with SKF hydraulic nuts up to HMV 92E and oil injection for bearing mounting at up to 100 MPa.

SKF

Hydraulic Pump 729124

Model: 729124

Small manual hydraulic pump for installing SKF hydraulic nuts up to HMV 54E and oil injection up to 100 MPa.

SKF

Hydraulic Nut HMV ..E Series (Metric)

Hydraulic nut for mounting bearings on tapered fit surfaces and for removing sleeves. Covers a wide range of shaft diameters from 50 mm to 1000 mm.

SKF

Hydraulic Nut HMVC ..E Series (Inch System)

Hydraulic nut for inch threads. Suitable for inch threads from 1.967 in to 37.410 in.

SKF

HMVA 42/200 Drive-Up Adapter

Model: HMVA 42/200

Adapter that enables bearing mounting by the SKF drive-up method using conventional SKF HMV nuts.

SKF

Hydraulic Pump TMJL 50

Model: TMJL 50

High-capacity manual hydraulic pump for SKF hydraulic nuts and OK couplings hydraulic chambers.

SKF

729124 DU

Model: 729124 DU

Hydraulic pump with digital pressure gauge for hydraulic tightening of nuts. Maximum pressure 100 MPa.

SKF

TMJL 100DU

Model: TMJL 100DU

Hydraulic pump with digital pressure gauge. Maximum pressure 100 MPa, compatible with HMV 92E nuts.

SKF

TMJL 50DU

Model: TMJL 50DU

Hydraulic pump with digital pressure gauge. Maximum pressure 50 MPa, compatible with all HMV E nut sizes.

SKF

EAZ 80/130

Model: EAZ 80/130

Multi-size induction heater for frequent removal of cylindrical roller bearing inner rings. Accommodates bore diameters of 65 to 130 mm.

SKF

EAZ 130/170

Model: EAZ 130/170

Induction heater for frequent removal of inner rings of large cylindrical roller bearings. Suitable for inner rings equivalent to 130 to 170 mm bore.

SKF

TMBR

Aluminum heating ring for removing the inner ring of cylindrical roller bearings. Maximum temperature 300 °C.

SKF

TIH L77

Model: TIH L77

Induction heater with expanded heating area for extra-large bearings. Can heat bearings up to 1200 kg with 20 kVA.

SKF

TIH L44

Model: TIH L44

Induction heater for extra-large bearings. Can heat bearings up to 1200 kg with 20 kVA.

SKF

TIH 220m

Model: TIH 220m

Large induction heater for heating bearings. Heats a 220 kg bearing to 110°C in 20 minutes.

SKF

TIH L33

Model: TIH L33

Induction heater for large bearings. Capable of heating bearings up to 700 kg with 15 kVA.

SKF

TIH L77MB

Model: TIH L77MB

Induction heater for metal parts (excluding bearings). Can heat workpieces up to 600 kg.

SKF

TIH L44MB

Model: TIH L44MB

Induction heater for metal parts (excluding bearings). Can heat workpieces up to 600 kg.

SKF

TIH L33MB

Model: TIH L33MB

Induction heater for metal components other than bearings. Can heat parts up to 350 kg.

SKF

TIH 030m

Model: TIH 030m

Compact, lightweight induction heater for heating bearings. Heats bearings up to 40 kg to 110 °C in 20 minutes.

SKF

High-Performance Hydraulic Spindle TMHS 75

Model: TMHS 75

An integrated hydraulic cylinder and pump spindle that generates a large pulling force with light effort.

SKF

High-Performance Hydraulic Spindle TMHS 100

Model: TMHS 100

Integrated hydraulic spindle with a maximum pulling force of 100 kN and an 80 mm stroke, suitable for long pulling operations.

SKF

Hot Plate 729659 C

Model: 729659 C

Thermostat-controlled hot plate for preheating small bearings before mounting. Adjustable from 50 to 200°C.

SKF

TIH 100m

Model: TIH 100m

Medium-sized induction heater for heating bearings. Heats a 97 kg bearing to 110°C in 20 minutes.

SKF

Portable Induction Heater TWIM 15

Model: TWIM 15

A portable heater that induction-heats bearings to facilitate interference-fit mounting. Automatically monitors temperature.

SKF

Puller Kit for Deep Groove Ball Bearings TMMD 100

Model: TMMD 100

A puller kit for removing deep groove ball bearings installed in shafts and housings. Compatible with 71 bearing types.

SKF

Forced Extraction Puller Kit TMBP 20E

Model: TMBP 20E

An adapter-type puller for removing deep groove ball bearings installed in a housing without disassembling the machine.

SKF

Puller Protective Cover TMMX

A transparent resin protective cover that fits over pullers and bearings. Allows the work condition to be checked during operation.

SKF

Puller Plate for 3-Claw Puller TMMS

Plate used with a 3-claw puller to grip the back face of the bearing inner ring and extract it. Available in 5 sizes.

SKF

Inner Race Puller Kit TMIC

High-strength expandable collet type inner race puller for applications with limited space behind the bearing for hooking.

SKF

Internal Bearing Puller Kit TMIP

A puller for removing the inner ring of a bearing fitted into a housing with an outer ring interference fit. Installed in a single operation using spring-loaded pulling tools.

SKF

Heavy-Duty Rear Puller TMBS 150E

Model: TMBS 150E

Rear puller kit for large-diameter shafts. Equipped with a hydraulic spindle with a maximum force of 100 kN and extension rods.

SKF

Heavy-Duty Rear Puller TMBS 100E

Model: TMBS 100E

Rear puller kit equipped with a hydraulic spindle rated up to 100 kN. Extension rods enable long-reach extraction.

SKF

Heavy-Duty Back Puller TMBS 50E

Model: TMBS 50E

Back puller for removing bearings in confined spaces, featuring a compact kit with a mechanical spindle.

SKF

Hydraulic Puller Set TMMA ..H/SET

Model: TMMA 75H/SET / TMMA 100H/SET

Hydraulic-type EasyPull combined with a pulling plate and protective cover as a set.

SKF