Machine Tools & Tools

Heavy-Duty Rear Puller TMBS Series

Heavy-duty rear puller that grips the back side of a bearing inner ring for removal. Three models: TMBS 50E, 100E, and 150E.

SKF

Hydraulic Puller Kit TMHC 110E

Model: TMHC 110E

Hydraulic puller kit combining a jaw puller and a heavy-duty back puller.

SKF

Hydraulic Jaw Puller Kit TMHP 10E

Model: TMHP 10E

A general-purpose hydraulic jaw puller kit including three arm lengths. Capable of a pulling force of 100 kN.

SKF

SKF High-Load Hydraulic Jaw Puller TMHP

Hydraulic-assisted jaw puller with maximum pulling force of 150 to 500 kN. For removing large bearings.

SKF

SKF EasyPull Hydraulic Puller TMMA ..H

Model: TMMA 75H / TMMA 100H

Hydraulic pulling tool with pre-assembled hydraulic cylinder, pump and puller, ready for immediate use.

SKF

SKF EasyPull Mechanical Puller TMMA Series

A 3-jaw mechanical pulling tool with spring-loaded arms that fit behind a component in one action.

SKF

Impact Spanner

Impact spanner for large locknuts, used to tighten and loosen them by applying effective impact. Used in combination with a hammer.

SKF

Combi Kit TMMK 10-35

Model: TMMK 10-35

A multi-purpose kit for fitting and removing deep groove ball bearings with bore diameters of 10 to 35 mm on shafts and housings.

SKF

SKF Reversible Jaw Puller TMMR F Series

A universal two-arm puller that can pull from either the inner or outer diameter side. Long-arm version (XL) also available.

SKF

SKF High-Load Jaw Puller TMMP 6/10/15

A high-load mechanical jaw puller with three jaws and automatic centering mechanism for medium to large bearings.

SKF

SKF Standard Jaw Puller TMMP Series

Standard mechanical jaw pullers with 2 or 3 jaws for removing small and medium-sized bearings.

SKF

Combi Kit TMMK 20-50

Model: TMMK 20-50

A multi-purpose kit for fitting and removing deep groove ball bearings with a bore of 20 to 50 mm on shafts and housings.

SKF

Lock Nut Spanner TMHN 7

Model: TMHN 7

A lock nut spanner set for mounting on tapered seats of self-aligning ball bearings and similar bearings. Prevents overtightening.

SKF

Axial Lock Nut Socket

A lock nut socket with an inch-size square drive that can be used with power tools and torque wrenches.

SKF

SKF Housing Hook Spanner

Dedicated hook spanner for tightening and loosening lock nuts on SKF bearing housings. Wide contact surface provides secure grip.

SKF

Universal Hook Spanner HNA Series

Universal hook spanner that fits several nut sizes with a single unit. A set of four covers a wide range of nuts.

SKF

Hook Spanner HN Series

Hook spanner for tightening and removing bearing lock nuts. Available in many sizes from HN 0 to HN 21-22.

SKF

Bearee™ FL3307 Sliding Sheet for Machine Tools

Model: FL3307

Fluororesin-based sliding sheet for machine tools with improved wear resistance and creep resistance. Features a low dynamic friction coefficient under oil lubrication, and a dedicated adhesive is also available.

NTN Corporation