SKF SYSTEM 24 LAGD Series

Specifications

SKF SYSTEM 24 LAGD model comparison

Compare 19 models in the same series by specification.

How to choose Automatic lubrication devices

Points to check when selecting, with the values for this product (SKF SYSTEM 24 LAGD Series).

1. 1. Select a lubricant suited to the application

   Prefilled lubricants include high-temperature, high-load/extreme-pressure, NSF H1 registered food-machinery grades, and biodegradable types. Grease is generally used for bearings and oil for chains. Mixing with existing lubricants may reduce performance, so confirm the brand and thickener compatibility, and select an empty oil unit if you intend to use your own oil.

2. 2. Determine capacity from required lubrication volume

   The main capacities are 60 ml and 125 ml. Determine the capacity by multiplying the required lubrication volume for each lubrication point (such as the equipment manufacturer's recommended value) by the desired replacement interval. For the same discharge period, a larger capacity dispenses more lubricant per unit time, so check that it is neither too large nor too small for the size of the lubrication point.

3. 3. Set the discharge period to match the replacement interval

   This product: Rated service period Set between 1 and 12 months

   The listed example allows the discharge period to be adjusted from 1 to 12 months. Matching it to the periodic inspection interval allows replacement work to be consolidated. Because gas-driven types change discharge speed with ambient temperature, periodically check the remaining lubricant in the transparent container to confirm it is decreasing as set.

4. 4. Check generated pressure and piping conditions

   This product: Maximum Generated Pressure 5 bar

   The maximum generated pressure of the listed product is 5 bar. Because the pressure is low, installing it at a distance with a hose may prevent discharge due to piping resistance. Direct mounting is the basic approach; when using stiff grease or long piping, check that the passage is not clogged and that back pressure is not high.

5. 5. Match the thread standard of the lubrication port

   This product: Connection Thread R 1/4

   If the mounting thread does not match the standard of the lubrication port (such as a grease nipple mounting hole), an adapter will be required. Confirm the thread standard and size on the equipment side in advance, and for oil use also check whether a check valve is included.

6. 6. Confirm the operating environment and explosion-proofing requirements

   This product: Ambient temperature range -20～+60 °C

   The ambient temperature range affects discharge stability and lubricant performance, so compare it with the installation site temperature. In hazardous areas such as those with flammable gases, select an ATEX-certified product matching the zone classification (some products are also certified for Zone 0).

This guide was written by AI based on the listed products' documents and specification items.

About Automatic lubrication devices and all products

Description

Lubricant sealed inside is discharged by gas pressure generated by a built-in battery. The discharge period is set with a dial, and no tools are required. The container is transparent, allowing the discharge amount to be checked visually. Featuring an IP68 waterproof and dustproof design, it has ATEX certification for Zone 0. The battery can be removed and disposed of separately.

FAQ

Q. How does the SKF SYSTEM 24 LAGD Series discharge lubricant?

A. It discharges sealed lubricant using gas pressure generated by a built-in battery. It is a single-point automatic lubricator in which inert gas pressure from a gas cell pushes a piston down, dispensing small amounts of lubricant continuously.

Q. How can the discharge period and capacity of the SKF SYSTEM 24 LAGD Series be selected?

A. The discharge period can be set between 1 and 12 months. Grease capacity is 60 ml for LAGD 60 and 125 ml for LAGD 125.

Q. What is the operating temperature range and waterproof/dustproof performance of the SKF SYSTEM 24 LAGD Series?

A. The ambient temperature range is -20 to +60 °C. The IP rating is IP 68, and it is IP68 designed and tested.

Q. Can the SKF SYSTEM 24 LAGD Series be used in Zone 0 environments?

A. Yes, it has ATEX certification for Zone 0.

Q. How can the SKF SYSTEM 24 LAGD Series be set and checked during use?

A. The discharge period is set with a dial, and no tools are required. Discharge can also be stopped during the discharge period. The container is transparent, so the discharge amount can be checked visually.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKF SYSTEM 24 LAGDシリーズ ガス動作式シングルポイント自動給油/給脂装置 12 pages Open page 1
  Found on: https://azuma-eg.com/product/maintainance/lubrication/