Catalog Searcher
Categories

Y-Bearing with Tapered Bore (YSA)

YSA / SKF (Official website) / Listed on page 37 of the document

Y-bearing with tapered bore, mounted using an adapter sleeve. Shows hook spanner dimensions and tightening angle for installation.

Last verified: (date the content was verified against the source document)

Y-Bearing with Tapered Bore (YSA) on page 37 of SKF "SKF 転がり軸受カタログ 2 Y-軸受 (インサート軸受)"
Source: SKF「SKF 転がり軸受カタログ 2 Y-軸受 (インサート軸受)」page 37
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Shaft tolerance h9/IT5

How to choose Bearing units

Points to check when selecting, with the values for this product (Y-Bearing with Tapered Bore (YSA)).

  1. 1. Match shaft diameter and dimensional system (metric/inch)

    Bearing units are offered in separate metric and inch series, and they are not interchangeable even when their appearance is similar. Listed products cover metric sizes of 3 to 150 mm and inch sizes of 1 to 4 in. First determine the shaft diameter and dimensional system, then select from the corresponding series.

  2. 2. Check the rated load against the operating conditions

    The basic dynamic load rating Cr is used for rolling fatigue life calculations, and the basic static load rating C0r is used for evaluating stationary or shock loads. Listed Cr values range from 7.28 to 793 kN, and there are heavy-load products, such as half-ring types, with increased static load ratings.

  3. 3. Select a specification suited to the operating temperature

    Standard greases and rubber seals deteriorate at high temperatures. High-temperature specifications are available in types with different upper temperature limits; for example, VA201 is rated at 130 to 250°C and VA228 at 260 to 350°C. In addition to the ambient temperature, check the permissible seal temperature and the sealed grease.

  4. 4. Choose the shaft fixing method for the application

    Set-screw type is easy to install but requires control of the tightening torque. The method that fixes the bearing with a tapered bore and adapter sleeve provides a secure connection to the shaft and suits applications with reversing rotation or vibration. Check it together with the recommended shaft tolerance grade.

  5. 5. Verify the permissible rotational speed

    Bearing units have an upper limit on usable rotational speed depending on seal friction and the fixing method. The permissible speeds of listed products range widely from 6 to 12000 r/min, and low-speed heavy-load and high-speed units have very different characteristics. Confirm that the operating speed has sufficient margin.

  6. 6. Allow for shaft tilt during installation

    In the spherical-fit design, the unit can absorb shaft tilt during installation up to a certain angle. However, in structures that allow regreasing, the permissible angle may be smaller. Listed products include an example of 2°. Check the permissible misalignment according to the accuracy of the base or frame.

This guide was written by AI based on the listed products' documents and specification items.

About Bearing units and all products

Description

Y-bearing with tapered bore mounted on an adapter sleeve. Recommended shaft tolerance is h9/IT5.

Features

  • Mounted using adapter sleeve

FAQ

Q. How is the Y-Bearing with Tapered Bore (YSA) installed?
A. It is installed using an adapter sleeve. It is a Y-bearing with a tapered bore.
Q. What is the recommended shaft tolerance for the Y-Bearing with Tapered Bore (YSA)?
A. The recommended shaft tolerance is h9/IT.
Q. Which tool information is provided for installing the Y-Bearing with Tapered Bore (YSA)?
A. The dimensions of the hook spanner and the tightening angle are provided.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Bearing units products, ordered by similarity of specifications and applications.

More products from SKF

See all →