Stainless Steel Hose Band

Specifications

How to choose Hose clamp

Points to check when selecting, with the values for this product (Stainless Steel Hose Band).

1. 1. Select a clamping range that suits the hose outer diameter

   This product: Clamping range 5～200 mm

   The clamping range is the range of hose outer diameters the clamp fits, which is 4 to 200 mm for the listed products. Measure the hose outer diameter after insertion and select a size where that value falls near the middle of the range to allow a margin in clamping allowance. At the ends of the range, clamping may be insufficient or excess band length may protrude.

2. 2. Choose a type suited to the application

   Worm-gear types have a wide clamping range and are easy to retighten. Wire types tighten with a thin wire and are suited to small-diameter hoses. Spring types can maintain clamping force when the hose shrinks due to temperature changes, and some are designed to tighten evenly around the full circumference.

3. 3. Determine the material according to the operating environment

   This product: Material SUS304-W

   Carbon steel types are inexpensive but require anti-rust treatment. For wet areas, outdoor use or environments exposed to chemicals, stainless steel types such as SUS304 are suitable. Also be aware of corrosion caused by the combination of materials with fittings or threaded parts.

4. 4. Check the anti-rust surface treatment

   For carbon steel types, corrosion resistance varies depending on the presence and type of treatments such as zinc plating or Geomet treatment (zinc-aluminum-based anti-rust coating). In humid or salty environments, check the type of treatment before selecting.

5. 5. Check contact with the hose by wire diameter and band width

   This product: Wire diameter 1.2～2.3 mm

   The wire diameter of wire types is 1 to 2.3 mm for the listed products. Thinner wire fits smaller hoses but raises contact pressure and can more easily dig into soft hoses. For band-type clamps, a wider band distributes the clamping force and is less likely to damage the hose.

6. 6. Tighten to the recommended torque

   Overtightening can cause hose damage or breakage of threaded parts, while insufficient tightening causes leaks or disconnection. For products where a recommended tightening torque is specified, tighten to that value using a torque driver or similar tool.

This guide was written by AI based on the listed products' documents and specification items.

About Hose clamp and all products

Description

Made of SUS304-W. Wire diameter 1.2 to 2.3 mm, bolt sizes from 4×15 to 6×62.

FAQ

Q. What are the clamping range and wire diameter of the Stainless Steel Hose Band series KS006 to KS200?

A. The clamping range is 5 to 200 mm and the wire diameter is 1.2 to 2.3 mm.

Q. What are the material and application of the Stainless Steel Hose Band?

A. The material is SUS304-W and the application is hose fixing.

Q. What is the range of bolt sizes for the Stainless Steel Hose Band?

A. Bolt sizes range from 4×15 to 6×62.

Written by AI based on the content of the source documents.

Source documents

• Catalog スプリングネット 製品カタログ（ばね類） 178 pages Open page 159
  Found on: https://www.samini.co.jp/catalog_list/