Catalog Searcher
Categories
🌐 English

Spiral (Continuous Forming, M Type)

スパイラー / Spring net (Official website)

Stainless steel continuously formed spiral blades. Same-day shipping available, handling M type with outer diameter of 13 to 17 mm.

Last verified: (date the content was verified against the source document)

Specifications

Material SUS304
Plate thickness t 1.0 mm
Outer diameter D 13〜17 mm
Inner diameter 6.0〜8.0 mm
Standard length 1000 mm
Unit price 3800 円

スパイラー model comparison

Compare 8 models in the same series by specification.

Model Outer diameter D Material Inner diameter Plate thickness t Standard length Unit price
スパイラー（溶接成形品・B型） 90〜425 mm SPHC — 4.5〜6.0 mm 1500〜2000 mm 30800〜95450 円
スパイラー（溶接成形品・U型） 90〜240 mm SUS304 — 3.0 mm 1500 mm 63800〜83050 円
スパイラー（連続成形品・G型ステンレス） 50〜75 mm Stainless steel 20 mm 1.5〜2.0 mm 1500 mm 40000 円
スパイラー（連続成形品・G型鋼板） 97〜250 mm SS400 (6.0t), SPCC (2.3t, 3.2t) — 2.3〜6.0 mm 1500 mm 18500〜35500 円
スパイラー（連続成形品・L型） 123〜314 mm SPCC — 3.2 mm 1500 mm 18000〜25500 円
スパイラー（連続成形品・M型） This product 13〜17 mm SUS304 6.0〜8.0 mm 1.0 mm 1000 mm 3800 円
スパイラー（連続成形品・S型SPCC） 48〜95 mm SPCC — 1.6 mm 1000 mm 4800〜7900 円
スパイラー（連続成形品・S型チタン） 48〜74 mm TP340 (Titanium) — 2 mm 250〜550 mm 16800〜21600 円

How to choose Springs

Points to check when selecting, with the values for this product (Spiral (Continuous Forming, M Type)).

  1. 1. Select the Spring Rate from the Required Force

    The spring rate k is the load required to deflect the spring by 1 mm. Multiply it by the deflection at installation and at operation to confirm that the required force can be obtained. Listed products range widely from 0.007 to 9.91 N/mm, and a margin should be allowed for variation, including the spring rate tolerance (for example, ±10%).

  2. 2. Keep Within the Maximum Load and Deflection Limits

    Using the spring beyond its maximum load or maximum deflection causes set (permanent deformation) or breakage. Confirm that the load at the maximum point of the operating stroke is within the maximum load, and for compression springs, that the solid height is not reached.

  3. 3. Installation Space, Outside Diameter, and Free Length

    This product: Outer diameter D 13〜17 mm

    Check that the outside diameter fits the hole or housing, and that the inside diameter does not interfere with the shaft it passes over (applicable shaft diameter). The free length is the length under no load; the difference from the installed length is the initial deflection. Because the coil diameter changes under load, allow sufficient clearance.

  4. 4. Select a Material Suited to the Operating Environment

    This product: Material SUS304

    Piano wire SWP-A has high strength but is prone to rust, and many versions are supplied with rust-preventive oil treatment. For humid environments or environments subject to washing, stainless steel such as SUS304-WPB is a candidate. For strongly corrosive environments such as seawater, titanium is a candidate.

  5. 5. Extension Springs: Initial Tension and Hook Shape

    Close-wound extension springs have initial tension, the load required before the spring begins to extend. For applications requiring movement with a small force, check the initial tension value. Also check that the hook shape, such as reverse loop, 90-degree, or 180-degree, matches how the mating part is engaged.

  6. 6. Torsion Springs: Angle and Arm Direction

    For torsion springs, check the torque at the operating angle (torsion spring rate × angle) and the arm length. The winding direction should match the direction of twist, and it is common to use the spring in the direction that winds it up. For free-size products, also specify the bending direction.

This guide was written by AI based on the listed products' documents and specification items.

About Springs and all products

Description

Made of SUS304, seamless with a smooth surface and good abrasion resistance. Blade only; shaft not included.

Features

  • Seamless continuous forming
  • Smooth surface with abrasion resistance

Applications

  • Conveying
  • Feeding

FAQ

Q. What are the material and plate thickness of the Spiral (Continuous Forming, M Type)?
A. The material is SUS304 and the plate thickness t is 1.0 mm.
Q. What are the outer and inner diameter ranges of the Spiral (Continuous Forming, M Type)?
A. The outer diameter D is 13 to 17 mm and the inner diameter is 6.0 to 8.0 mm.
Q. What applications can the Spiral (Continuous Forming, M Type) be used for?
A. It can be used for conveying and feeding.
Q. What are the features of the Spiral (Continuous Forming, M Type)?
A. Seamless continuous forming and a smooth surface provide abrasion resistance.
Q. What is the standard length and is a shaft included with the Spiral (Continuous Forming, M Type)?
A. The standard length is 1000 mm. A shaft is not included; this is a blade-only product.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Springs products, ordered by similarity of specifications and applications.

More products from Spring net

See all →