Torsion Spring Free Size (Standard Type, Bending Type E/F)

Specifications

ねじりスプリング フリーサイズ model comparison

Compare 4 models in the same series by specification.

How to choose Springs

Points to check when selecting, with the values for this product (Torsion Spring Free Size (Standard Type, Bending Type E/F)).

1. 1. Select the Spring Rate from the Required Force

   The spring rate k is the load required to deflect the spring by 1 mm. Multiply it by the deflection at installation and at operation to confirm that the required force can be obtained. Listed products range widely from 0.007 to 9.91 N/mm, and a margin should be allowed for variation, including the spring rate tolerance (for example, ±10%).

2. 2. Keep Within the Maximum Load and Deflection Limits

   Using the spring beyond its maximum load or maximum deflection causes set (permanent deformation) or breakage. Confirm that the load at the maximum point of the operating stroke is within the maximum load, and for compression springs, that the solid height is not reached.

3. 3. Installation Space, Outside Diameter, and Free Length

   Check that the outside diameter fits the hole or housing, and that the inside diameter does not interfere with the shaft it passes over (applicable shaft diameter). The free length is the length under no load; the difference from the installed length is the initial deflection. Because the coil diameter changes under load, allow sufficient clearance.

4. 4. Select a Material Suited to the Operating Environment

   Piano wire SWP-A has high strength but is prone to rust, and many versions are supplied with rust-preventive oil treatment. For humid environments or environments subject to washing, stainless steel such as SUS304-WPB is a candidate. For strongly corrosive environments such as seawater, titanium is a candidate.

5. 5. Extension Springs: Initial Tension and Hook Shape

   Close-wound extension springs have initial tension, the load required before the spring begins to extend. For applications requiring movement with a small force, check the initial tension value. Also check that the hook shape, such as reverse loop, 90-degree, or 180-degree, matches how the mating part is engaged.

6. 6. Torsion Springs: Angle and Arm Direction

   For torsion springs, check the torque at the operating angle (torsion spring rate × angle) and the arm length. The winding direction should match the direction of twist, and it is common to use the spring in the direction that winds it up. For free-size products, also specify the bending direction.

This guide was written by AI based on the listed products' documents and specification items.

About Springs and all products

Description

Order by specifying the model number starting with product number 36-, winding direction, number of coils, and dimensions ① and ②. Number of coils is available in 0.125 increments (1 to 10 coils) for Standard Type and in 0.25 increments (5 to 20 coils) for Bending Type E and F. Dimensions can be specified in 1 mm increments with a tolerance of ±0.5 mm. The shape can be checked using a dedicated processing simulator.

FAQ

Q. How do I specify the model number for Torsion Spring Free Size?

A. Order by specifying the model number starting with product number 36-, winding direction, number of coils, and dimensions ① and ②.

Q. What are the increments and tolerance for the number of coils and dimensions for Torsion Spring Free Size?

A. Number of coils is available in 0.125 increments (1 to 10 coils) for Standard Type and in 0.25 increments (5 to 20 coils) for Bending Type E and F. Dimensions can be specified in 1 mm increments, with a tolerance of ±0.5 mm.

Q. Can I select the winding direction for Torsion Spring Free Size?

A. Yes. The winding direction can be selected as right (R) or left (L).

Q. Can I check the shape of Torsion Spring Free Size before ordering?

A. Yes. The shape can be checked using a dedicated processing simulator.

Written by AI based on the content of the source documents.

Source documents

• Catalog スプリングネット 製品カタログ（ばね類） 178 pages
  Found on: https://www.samini.co.jp/catalog_list/