Catalog Searcher
Categories
🌐 English

Chain Support Stand RS-CR1

Model RS-CR1 / チェーン受け台・チェーンバイス / Tsubakimoto Chain Co. (Official website) / Listed on page 1 of the document

A chain support stand that holds single-row roller chain (RS15) when cutting it.

Last verified: (date the content was verified against the source document)

Chain Support Stand RS-CR1 on page 1 of Tsubakimoto Chain Co. "チェーン切断工具"
Source: Tsubakimoto Chain Co.「チェーン切断工具」page 1
A reduced image of the relevant page is quoted from the document. Copyright belongs to Tsubakimoto Chain Co..Request removal

Specifications

Applicable chain (single row) RS15
Overall length L 50 mm
Height H 16.4 mm
Width B 20 mm

チェーン受け台・チェーンバイス model comparison

Compare 6 models in the same series by specification.

Model Applicable chain (single row) Applicable chain (double row) Applicable chain (triple row) Overall length L Height H Width B
RS-CR1 This product RS15 — — 50 mm 16.4 mm 20 mm
RS-CR2 RS25 — — 50 mm 19 mm 20 mm
RS-CR3 RS35 — — 60 mm 30 mm 30 mm
RS-CV1 RS40～80 RS40 — 100 mm 65 mm 94～115 mm
RS-CV2 RS40～160 RS40～100 RS40～100 180 mm 110 mm 120～151 mm
RS-CV3 RS80～240 RS80～160 RS80～100 200 mm 170 mm 180～220 mm

How to choose Chain vise

Points to check when selecting, with the values for this product (RS-CR1).

  1. 1. Check the nominal number for single-strand chain

    This product: Applicable chain (single row) RS15

    The slot width and pin clearance holes of cradles and vises are designed to match chain pitch and roller diameter. Because some products are dedicated to specific nominal numbers such as RS15, RS25, or RS35, confirm that the nominal number of the chain in use is within the applicable range.

  2. 2. Confirm compatibility with double-strand chain

    Double-strand chain has longer pins and requires plate support across the full width. Single-strand dedicated products may not provide enough support and the plates may deform. Check that the applicable double-strand nominal numbers are listed in the applicable range.

  3. 3. Verify triple-strand chain suitability

    For equipment handling triple-strand chain, a medium or larger model that supports up to 3 strands is required. The applicable nominal numbers for triple-strand chain may be limited to a narrower range than for single- or double-strand chain, so verify by the combination of strand count and nominal number.

  4. 4. Review width dimensions and adjustment range

    This product: Width B 20 mm

    Listed products vary in width from 20 to 220 mm, and adjustable types are specified by a range. Use width B to determine whether multi-strand or large chain can be clamped and whether the unit fits the workbench or installation space.

  5. 5. Check overall length and height for installation

    This product: Height H 16.4 mm

    Products are available with overall lengths of 50 to 200 mm and heights of 16.4 to 170 mm. Large-chain models are taller and heavier, so check dimensions for mounting in a vise, stability on the workbench, and ease of handling.

This guide was written by AI based on the listed products' documents and specification items.

About Chain vise and all products

Applications

  • Cutting roller chain

FAQ

Q. Which chain can RS-CR1 be used with when cutting?
A. It is a chain support stand that holds single-row roller chain (RS15) when cutting it.
Q. What are the dimensions (overall length, height, and width) of RS-CR1?
A. Overall length L: 50 mm, height H: 16.4 mm, width B: 20 mm.

Written by AI based on the content of the source documents.

Source documents

More products from Tsubakimoto Chain Co.

See all →