Catalog Searcher
Categories

Axial Rotary Seal R06-R

Model R06-R / ロータリーシール / SKF (Official website) / Listed on page 53 of the document

Axial seal with the same shape as R06-P, using SKF Ecorubber-based material to improve chemical resistance and heat resistance.

Last verified: (date the content was verified against the source document)

Axial Rotary Seal R06-R on page 53 of SKF "切削加工シール製品ラインアップ"
Source: SKF「切削加工シール製品ラインアップ」page 53
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Operating Temperature Range -50～+200 °C
Maximum Sliding Speed 25 m/s

ロータリーシール model comparison

Compare 25 models in the same series by specification.

Model Maximum Sliding Speed Maximum Operating Pressure Operating Temperature Range
R01-AF2 0.5 m/s 15 bar —
R02-P 0.2 m/s — 0～+80 °C
R02-R 0.2 m/s — -50～+200 °C
R03-P 0.2 m/s 400 bar -40～+100 °C
R03-R 0.2 m/s 250 bar -50～+200 °C
R04-A 0.2 m/s 160 bar -50～+110 °C
R05-A 0.2 m/s 160 bar -50～+110 °C
R06-P 25 m/s — -50～+110 °C
R06-R This product 25 m/s — -50～+200 °C
R07-P 25 m/s — -50～+110 °C
R07-R 25 m/s — -50～+200 °C
R08-A — — -60～+200 °C
R08-P 2.5 m/s — -50～+110 °C
R08-R 7.5 m/s — -60～+200 °C
R09-F 0.4 m/s 350 bar -20～+200 °C
R09-FS 0.4 m/s 350 bar -30～+200 °C
R10-F 0.4 m/s 350 bar -20～+200 °C
R10-FS 0.4 m/s 350 bar -30～+200 °C
R11-F 20 m/s 5 bar -200～+260 °C
R19-F 2 m/s 150 bar -200～+260 °C
R19-FX 2 m/s 150 bar -200～+260 °C
R30-A 0.5 m/s — -25～+200 °C
TX 11 m/s — -30～+150 °C
TY 11 m/s — -30～+150 °C
TZ 11 m/s — -30～+150 °C

How to choose Rotary Seals

Points to check when selecting, with the values for this product (R06-R).

  1. 1. Select a size that matches the shaft diameter

    Select seals to match the diameter of the shaft on which they are installed. Listed products cover a shaft diameter range of 5 to 1000 mm, and the applicable range differs by type. Shaft tolerance and surface roughness also affect sealing performance and wear, so check the recommended groove dimensions together with the shaft diameter.

  2. 2. Confirm the peripheral speed is within the limit

    This product: Maximum Sliding Speed 25 m/s

    Sliding speed is evaluated as the peripheral speed calculated from shaft diameter and rotational speed. The listed upper limits range widely from 0.2 to 25 m/s, and higher speeds make lips and slide rings more prone to wear from frictional heat. Choose a product with a margin above the actual peripheral speed, for example from PTFE spring-loaded types recommended for low friction and high speed.

  3. 3. Match the pressure rating and single- or double-acting design

    The maximum operating pressure of listed products is 5 to 400 bar. Springless lip seals are mainly intended for grease retention and foreign matter exclusion and are not suitable for high pressure. For rotary joints and rotary pivots subject to high pressure or pressure from both sides, consider double-acting PTFE seals combined with O-rings.

  4. 4. Select materials suited to temperature and fluid

    Rubber-based materials such as NBR offer excellent elasticity, while PTFE offers superior chemical resistance, heat resistance and low friction. PTFE is often selected for chemical and pharmaceutical applications and high-temperature environments. Check that the O-ring material of the energizer is compatible with both the operating temperature range and the fluid used.

  5. 5. Check the cross-section dimensions for the groove

    Cross-section dimensions range from 0.85 to 10.5 mm and must match the width and depth of the housing groove. When replacing existing equipment, match the cross-section dimensions as well as the shaft diameter, and confirm that the squeeze is appropriate.

  6. 6. Determine whether a split design is required

    Split designs that can be divided into two halves are available for plummer blocks, allowing replacement without removing the shaft and reducing maintenance effort. When using a one-piece type, confirm during the design stage whether it can be inserted from the shaft end and whether chamfers or tooling are provided to avoid damaging the lip.

This guide was written by AI based on the listed products' documents and specification items.

About Rotary Seals and all products

Description

Installed on the shaft with an interference fit. The material extends the operating temperature range.

Features

  • Chemical resistance
  • Heat resistance

Applications

  • Agricultural machinery
  • Construction machinery

FAQ

Q. What are the operating temperature range and maximum sliding speed of the Axial Rotary Seal R06-R?
A. The operating temperature range is -50 to +200 °C, and the maximum sliding speed is 25 m/s.
Q. How does the R06-R differ from the R06-P?
A. The R06-R is an axial seal with the same shape as the R06-P, using SKF Ecorubber-based material to improve chemical resistance and heat resistance.
Q. What applications is the R06-R used for?
A. It is intended for use in agricultural machinery and construction machinery.
Q. How is the R06-R installed?
A. It is installed on the shaft with an interference fit.

Written by AI based on the content of the source documents.

Source documents

Similar products (other manufacturers)

Rotary Seals products, ordered by similarity of specifications and applications.

More products from SKF

See all →