Vibration Damper Tension Spring 44 Series

Specifications

How to choose Machine Element Components

Points to check when selecting, with the values for this product (Vibration Damper Tension Spring 44 Series).

1. 1. Select a width and height that fit the keyway

   The key width b and height h are paired according to standard dimensions matched to shaft diameter, and should be selected to suit the keyway dimensions on the shaft and the mating part (gear or pulley). The listed products have widths of 3 to 14 mm and heights of 3 to 9 mm. A loose width fit causes rattling, while a tight fit prevents assembly.

2. 2. Check height against keyway depth combination

   The key height h must be appropriate relative to the combined depth of the shaft keyway and the hub-side keyway. If it is too high, the mating part will not fit; if it is too low, the transmissible torque will be insufficient. Verify the nominal dimensions in the standard table together with the width.

3. 3. Determine length by hub length and transmitted torque

   The key length L should fall within the length of the gear or pulley hub (bore section), and should be determined by whether its shear and surface pressure strength are sufficient for the transmitted torque. The listed products have lengths of 10 to 80 mm. Also confirm that the end shape of double round or single round keys matches the shaft keyway shape (such as the round end produced by end-mill machining).

4. 4. Choose material to suit the operating environment

   For general machinery, carbon steel such as S50C is used; for environments exposed to water or chemicals, and for food-related equipment, stainless steel such as SUS316 with high corrosion resistance is used. Pay attention to strength differences from key, shaft, and hub material combinations, and to corrosion caused by contact between dissimilar metals.

5. 5. Match covers to fan outer diameter

   For fan motor covers (fan guards), select a model that fits the outer diameter D of the fan being installed. The listed products have outer diameters of 51 to 154 mm. Also confirm the mounting hole positions and whether the surface treatment, such as trivalent chromate treatment, meets the corrosion resistance requirements of the installation environment.

6. 6. Check wire diameter and inner diameter for pins and springs

   This product: Wire diameter 1.6〜5.5 mm

   Pins and springs made from wire material vary in strength and spring force depending on wire diameter. The listed products have wire diameters of 1.2 to 1.8 mm and inner diameters of 27 to 31 mm. Select by verifying the dimensional relationship with the mating shaft or hole and whether the wire diameter suits the required load.

This guide was written by AI based on the listed products' documents and specification items.

About Machine Element Components and all products

Description

Structure combining a frame spring with an acrylic resin viscoelastic body, with an outer diameter range of 20 to 65 mm and a wire diameter range of 1.6 to 5.5 mm. Vibration isolation level: approx. 6 to 10 dB.

FAQ

Q. What are the natural frequency and vibration isolation level of the Vibration Damper Tension Spring 44 Series?

A. The natural frequency is 3.4 to 7.5 Hz. The vibration isolation level is approx. 6 to 10 dB.

Q. What is the range of outer diameter and wire diameter for the Vibration Damper Tension Spring 44 Series?

A. The outer diameter ranges from 20 to 65 mm, and the wire diameter ranges from 1.6 to 5.5 mm.

Q. How does the Vibration Damper Tension Spring 44 Series absorb vibration structurally?

A. It supports the load with a frame spring and absorbs vibration with a viscoelastic body. The viscoelastic body uses acrylic resin.

Q. What applications is the Vibration Damper Tension Spring 44 Series suited for?

A. It is used for vibration reduction and vibration-isolating support.

Q. What does the "non-bouncing spring" feature of the Vibration Damper Tension Spring 44 Series mean?

A. The product information describes it as a "non-bouncing spring."

Written by AI based on the content of the source documents.

Source documents

• Catalog スプリングネット 製品カタログ（ばね類） 178 pages
  Found on: https://www.samini.co.jp/catalog_list/