SKF

Puller Plate for 3-Claw Puller TMMS

Plate used with a 3-claw puller to grip the back face of the bearing inner ring and extract it. Available in 5 sizes.

SKF

729124 DU

Model: 729124 DU

Hydraulic pump with digital pressure gauge for hydraulic tightening of nuts. Maximum pressure 100 MPa.

SKF

811 Series Shaft Race (WS) and Housing Race (GS)

Shaft race (WS) and housing race (GS) with 811 series dimensions. Mainly for use with thrust cylindrical roller bearings with cage, but can also be combined with needle rollers.

SKF

CARB Toroidal Roller Bearing

A CARB bearing for the free side that combines the self-aligning capability of a spherical roller bearing with the axial displacement capability of a cylindrical roller bearing. Features a compact cross-section with high load capacity.

SKF

CARB Toroidal Roller Bearings with Adapter Sleeve

A series of large CARB toroidal roller bearings with bore diameters of 70 to 1000 mm, and adapter sleeves for mounting. Includes SKF Explorer bearings.

SKF

CARB Toroidal Roller Bearing with Withdrawal Sleeve

A series of CARB toroidal roller bearings with bore diameters of 35 to 950 mm, together with AH and AOH type withdrawal sleeves for mounting.

SKF

EAZ 130/170

Model: EAZ 130/170

Induction heater for frequent removal of inner rings of large cylindrical roller bearings. Suitable for inner rings equivalent to 130 to 170 mm bore.

SKF

EAZ 80/130

Model: EAZ 80/130

Multi-size induction heater for frequent removal of cylindrical roller bearing inner rings. Accommodates bore diameters of 65 to 130 mm.

SKF

EAZ Control Cabinet

Control cabinet for operating EAZ coils, with a touchscreen and automatic temperature control.

SKF

HM(E) Lock Nut

Large lock nut with trapezoidal thread for large bearings. Used in combination with a fixing clip. Available in Tr220x4 to Tr1120x8.

SKF

HMVA 42/200 Drive-Up Adapter

Model: HMVA 42/200

Adapter that enables bearing mounting by the SKF drive-up method using conventional SKF HMV nuts.

SKF

ICOS Oil Seal Bearing Unit

Oil seal bearing unit with bore diameter of 12 to 30 mm. Dimensions, basic load ratings and limiting speeds are listed for each model number.

SKF

INSOCOAT Cylindrical Roller Bearing

Cylindrical roller bearing with an insulating coating on the outer ring or inner ring to prevent electrical erosion in applications such as motors. Covers bore diameters of 50 to 150 mm.

SKF

INSOCOAT Deep Groove Ball Bearing

A deep groove ball bearing with an insulating coating applied to the outer ring or inner ring to prevent electrical erosion in motors and similar equipment. Provides insulation protection against both DC and AC.

SKF

IR Series Inner Ring for Needle Roller Bearings

Standard inner ring for needle roller bearings. Made of high-carbon chromium bearing steel, hardened and ground.

SKF

K01-P Piston Seal

Model: K01-P

General-purpose piston seal for single-acting hydraulic cylinders. Asymmetric profile provides high sealing performance over a wide range of conditions.

SKF

K01-PE Piston Seal

Model: K01-PE

Asymmetric profile piston seal for single-acting pistons with high contact force.

SKF

K01-R Piston Seal

Model: K01-R

Single-acting hydraulic piston seal for SKF Ecorubber-based materials, offering excellent chemical resistance and heat resistance.

SKF

K02-P Piston Seal

Model: K02-P

High-pressure hydraulic single-acting piston seal with a square-section active backup ring.

SKF

K02-PD Piston Seal

Model: K02-PD

High-pressure hydraulic single-acting piston seal with trapezoidal active backup ring.

SKF

K02-R Piston Seal

Model: K02-R

Single-acting hydraulic piston seal with square backup ring, offering excellent chemical and heat resistance.

SKF

K02-RD Piston Seal

Model: K02-RD

Hydraulic single-acting piston seal with trapezoidal backup ring, offering excellent chemical and heat resistance.

SKF

K03-F Piston Seal

Model: K03-F

Single-acting PTFE piston seal with reduced friction resistance and stick-slip.

SKF

K03-P Piston Seal

Model: K03-P

Hydraulic single-acting piston seal with built-in O-ring. Usable over a wide temperature range.

SKF

K03-S Piston Seal

Model: K03-S

Single-acting PTFE piston seal with built-in helical spring, offering excellent chemical and heat resistance.

SKF

K03-SX Piston Seal

Model: K03-SX

A PTFE single-acting piston seal of the K03-S series with an improved spring groove.

SKF

K04-P Piston Seal

Model: K04-P

High-pressure hydraulic single-acting piston seal with built-in O-ring and square backup ring.

SKF

K04-PD Piston Seal

Model: K04-PD

High-pressure hydraulic single-acting piston seal with built-in O-ring and trapezoidal backup ring.

SKF

K05-P Piston Seal

Model: K05-P

Pneumatic single-acting piston seal with high wear resistance. For lubricated and dry environments.

SKF

K05-R Piston Seal

Model: K05-R

A pneumatic single-acting piston seal with chemical resistance and heat resistance.

SKF

K06-P Piston Seal

Model: K06-P

Standard symmetrical-profile lip seal. Not recommended for new designs.

SKF

K06-R Piston Seal

Model: K06-R

Symmetrical lip seal with chemical and heat resistance.

SKF

K07-F Piston Seal

Model: K07-F

PTFE-made symmetrical lip seal with built-in O-ring. Not recommended for new designs.

SKF

K07-P Piston Seal

Model: K07-P

Symmetrical-profile lip seal with built-in O-ring. Not recommended for new designs.

SKF

K08-D Piston Seal

Model: K08-D

Symmetrical double-acting piston seal with slide ring.

SKF

K08-DS Piston Seal

Model: K08-DS

Double-acting piston seal with energizer-backed slide ring for demanding operating conditions.

SKF

K08-E Piston Seal

Model: K08-E

Asymmetric profile single-acting piston seal with slide ring for low- and high-speed positioning applications.

SKF

K08-ES Piston Seal

Model: K08-ES

Single-acting piston seal with built-in energizer and slide ring for severe operating conditions.

SKF

K08-P Piston Seal

Model: K08-P

Symmetrical double-acting piston seal with slide ring for enhanced wear resistance and sealing performance.

SKF

K09-D Piston Seal

Model: K09-D

Compact double-acting piston seal with integrated guide ring function for frequent-motion applications.

SKF

K09-F Piston Seal

Model: K09-F

Compact double-acting piston seal with low-friction design using PTFE-based slide ring.

SKF

K09-H Piston Seal

Model: K09-H

Compact piston seal for double-acting hydraulic pistons in extreme-pressure, severe operating conditions.

SKF

K09-N Piston Seal

Model: K09-N

Compact double-acting piston seal integrating guide ring function.

SKF

K1012-M V-Packing Set

Model: K1012-M

V-packing set with surface trimming process for high-load hydraulic equipment.

SKF

K1012-T V-Packing Set

Model: K1012-T

V-packing set for high-load hydraulic equipment used in cutting processes.

SKF

K1315-T V-Packing Set

Model: K1315-T

V-packing set with flexible lips that provides good sealing in relatively high-pressure ranges.

SKF

K16-A Cup Seal

Model: K16-A

A simple cup seal for repair of legacy hydraulic and pneumatic cylinders and small systems.

SKF

K16-B Cup Seal

Model: K16-B

Simple cup seal for repair of legacy hydraulic and pneumatic cylinders and small systems.

SKF

K17-P Piston Seal

Model: K17-P

Light to medium load hydraulic double-acting piston seal with integrated guide ring function.

SKF

K17-R Piston Seal

Model: K17-R

Hydraulic double-acting piston seal with integrated guide ring, offering chemical resistance and heat resistance.

SKF

K19-F Piston Seal

Model: K19-F

PTFE single-acting piston seal with built-in finger spring for chemical, pharmaceutical and food applications.

SKF

K19-FX Piston Seal

Model: K19-FX

PTFE single-acting piston seal with improved spring groove. Elgiloy spring also available.

SKF

K20-R Space-Saving Compact Piston Seal

Model: K20-R

SKF

K21-P Piston Seal

Model: K21-P

Single-acting lip seal with an acute-angle lip that provides sealing performance for high-viscosity fluids. Can also be used as a wiper.

SKF

K22-P Piston Seal

Model: K22-P

Symmetrical-profile V-packing type piston seal with built-in support ring. For repair applications.

SKF

K22-R Piston Seal

Model: K22-R

Symmetrical-profile lip seal with support ring, offering chemical resistance and heat resistance.

SKF

K23-D Piston Seal

Model: K23-D

Double-acting hydraulic piston seal with integrated backup ring function for high-frequency operation.

SKF

K23-F Piston Seal

Model: K23-F

Double-acting integrated seal with backup ring, using a PTFE-based slide ring for reduced friction.

SKF

K23-H Piston Seal

Model: K23-H

Backup ring integrated piston seal for extreme-pressure, hydraulic double-acting pistons.

SKF

K23-N Piston Seal

Model: K23-N

Hydraulic double-acting piston seal with integrated backup ring function for harsh operating conditions.

SKF