SKF

SKF Metric Single-Row Tapered Roller Bearings

Product range and design data for metric single-row tapered roller bearings conforming to ISO 355.

SKF

SKF Motor Encoder Unit

Compact encoder bearing unit combining an active sensor with an SKF Explorer deep groove ball bearing, designed for easy installation. Measures the rotational speed and direction of AC motors.

SKF

SKF Roller Encoder Unit

Model: AHE-5509 A

A plug-and-play bearing unit with an integrated encoder for applications where the outer ring rotates. Can be incorporated into pulleys, rollers and similar components.

SKF

SKF Single-Row Deep Groove Ball Bearings (Boundary Dimensions d 3–10 mm)

A series of small-bore single-row deep groove ball bearings with bore diameters of 3 to 10 mm. Outside diameter, width, basic load ratings, and limiting speeds are listed for each bearing number.

SKF

SKF Pressure Gauge (100-400 MPa)

High-pressure analog pressure gauge for SKF hydraulic pumps and injectors. Equipped with safety glass and protection against sudden pressure drops.

SKF

SKF Basic Design Tapered Roller Bearing

A basic single-row tapered roller bearing series from SKF, offering long service life and low-temperature-rise operation.

SKF

SKF Tapered Roller Bearing with Outer Ring Flange

A tapered roller bearing with a flange on the outer ring, allowing easy axial positioning within the housing.

SKF

SKF Suffix QCL7C Tapered Roller Bearing

Tapered roller bearing designed for differential gear pinions, offering high rotational accuracy and high preload capacity.

SKF

SKF Temperature Probe TMDT 2 Series

K-type thermocouple probes for SKF digital thermometers. Shapes and heat resistance vary depending on the application.

SKF

SKF Thermometer TKDT 10

Model: TKDT 10

Large LCD digital thermometer that connects two temperature probes. Displays two-point temperatures and temperature differences.

SKF

SKF Lubrication Planner

Free software that supports the creation and management of lubrication plans.

SKF

SKF Stroboscope for Visual Inspection TKRS Series

A portable stroboscope series for visual inspection of rotating equipment in operation. Brightness varies depending on the number of LEDs.

SKF

SKF Matched Tapered Roller Bearings (Face-to-Face, Back-to-Back, Tandem)

Matched tapered roller bearing set supplied with a spacer ring. Available in face-to-face, back-to-back, and tandem arrangements.

SKF

SKF Automatic Lubricant Dispenser TLMR Series

An electric automatic grease dispenser for single lubrication points that delivers grease over long distances at a high pressure of 30 bar.

SKF

SKF Infrared Thermometer TKTL Series

A series of infrared thermometers that measure temperature without contact. Measuring range and functions vary by model.

SKF

SKF Bearings (Dimension Table and Retaining Ring Compatibility Table)

Overview of bearing mounting dimensions, calculation factors, and compatible retaining rings (SW and DIN 471), covering the 120 to 240 mm shaft diameter range.

SKF

SKF Bearing Grease (LGMT 2 and General)

A general designation for bearing greases with different applications and temperature ranges depending on thickener type, including lithium, lithium complex, polyurea, and PTFE. Food-grade versions are also included.

SKF

SKF Electronic Stethoscope TKST Series

A portable electronic stethoscope that uses a probe to pick up noise from bearings and machinery and identify abnormal sounds.

SKF

SKF Quiet Running Deep Groove Ball Bearing (VQ658)

Model: VQ658

A quiet running deep groove ball bearing for demanding noise requirements such as wind turbine generators.

SKF

SKF Vibracon

Chock for rotating equipment with self-aligning capability. Helps eliminate soft foot and reduce foundation costs.

SKF

SKF Vibracon Adjustment Tool

A dedicated tool for safely and conveniently adjusting the height of SKF Vibracon chocks.

SKF

SKF Energy Efficient (E2) Y-bearing

An energy-saving Y-bearing with more than 50% lower friction moment than standard products. Lower operating temperature is expected to extend grease life and bearing life.

SKF

SKF Steering Encoder Unit

Plug-and-play steering input device for steer-by-wire systems. Detects steering with a non-contact incremental sensor and outputs two redundant signal channels.

SKF

SKF Stainless Steel Y-Bearing

Stainless steel Y-bearing for the food industry. Uses food-grade grease and food-compliant seals.

SKF

SKF Dry Lube Bearings

Bearings filled with dry lubricant based primarily on graphite and molybdenum disulfide, designed for environments where relubrication is difficult, such as high or low temperatures and high-speed rotation. Includes deep groove ball bearings, Y-bearings, various roller bearings, and thrust bearings.

SKF

SKF Housing Hook Spanner

Dedicated hook spanner for tightening and loosening lock nuts on SKF bearing housings. Wide contact surface provides secure grip.

SKF

SKF Multilog Online Condition Monitoring Device IMx-8

A compact online condition monitoring device that detects rotating machinery faults early and supports improved reliability and uptime with automatic advice. Settings and monitoring are available via a mobile device.

SKF

SKF Reversible Jaw Puller TMMR F Series

A universal two-arm puller that can pull from either the inner or outer diameter side. Long-arm version (XL) also available.

SKF

SKF Standard Jaw Puller TMMP Series

Standard mechanical jaw pullers with 2 or 3 jaws for removing small and medium-sized bearings.

SKF

SKF Spherical Washer

A spherical washer that keeps the bolt head and nut face parallel and prevents bolt bending.

SKF

SKF Ultra-High/Low Temperature Y-Bearing (Insert Bearing)

Insert-type Y-bearing for use in extreme temperature ranges. Same design as the standard YAR 2-2F series, available in VA201 and VA228 types.

SKF

SKF Ultra High/Low Temperature Deep Groove Ball Bearing

Deep groove ball bearing for extreme high and low temperature environments. Variants VA201, VA208 and VA228 are available, differing in cage and seal types.

SKF

SKF High-Temperature Insert Bearing Ball Bearing Unit VA201

High-temperature insert bearing ball bearing unit lubricated with polyalkylene glycol and graphite, for operating temperatures up to 250°C. Not food grade.

SKF

SKF High-Temperature Insert Bearing and Ball Bearing Unit VA228

High-temperature insert bearing and ball bearing unit usable up to 350°C. Designed to ISO standard dimensions for easy replacement in existing equipment.

SKF

SKF High-Temperature Deep Groove Ball Bearing VA201

High-temperature deep groove ball bearing lubricated with polyalkylene glycol and graphite-blended grease, rated up to 250 °C. Available in open and double-sided shielded designs.

SKF

SKF High-Temperature Deep Groove Ball Bearing VA208

High-temperature deep groove ball bearing lubricated by a split-type graphite cage, with long service life even at 350°C.

SKF

SKF High-Temperature Deep Groove Ball Bearing VA228

A high-temperature deep groove ball bearing usable up to 350°C. Graphite lubrication eliminates the need for relubrication, making it suitable for high-temperature environments with low-speed and oscillating applications.

SKF

SKF High-Load Jaw Puller TMMP 6/10/15

A high-load mechanical jaw puller with three jaws and automatic centering mechanism for medium to large bearings.

SKF

SKF High-Load Hydraulic Jaw Puller TMHP

Hydraulic-assisted jaw puller with maximum pulling force of 150 to 500 kN. For removing large bearings.

SKF

SNL Plummer Block Seal TX

Model: TX

Split-type single-acting shaft seal for SNL plummer block housings. Easy to install by splitting into two halves.

SKF

SNL Plummer Block Seal TY

Model: TY

Split-type double-lip springless shaft seal for SNL plummer block housings.

SKF

SKF SNL Plummer Block Seal TZ

Model: TZ

A split-type, double-acting SNL plummer block seal similar to the TY profile, manufactured as a back-to-back assembly.

SKF

THPN M16x1,5 Thread Connection Nipple

Model: THPN M16G1/8 ほか

Nipple for connecting M16x1,5 thread and G thread. Maximum operating pressure 300～400 MPa.

SKF

TIH 030m

Model: TIH 030m

Compact, lightweight induction heater for heating bearings. Heats bearings up to 40 kg to 110 °C in 20 minutes.

SKF

TIH 100m

Model: TIH 100m

Medium-sized induction heater for heating bearings. Heats a 97 kg bearing to 110°C in 20 minutes.

SKF

TIH 220m

Model: TIH 220m

Large induction heater for heating bearings. Heats a 220 kg bearing to 110°C in 20 minutes.

SKF

TIH L33

Model: TIH L33

Induction heater for large bearings. Capable of heating bearings up to 700 kg with 15 kVA.

SKF

TIH L33MB

Model: TIH L33MB

Induction heater for metal components other than bearings. Can heat parts up to 350 kg.

SKF

TIH L44

Model: TIH L44

Induction heater for extra-large bearings. Can heat bearings up to 1200 kg with 20 kVA.

SKF

TIH L44MB

Model: TIH L44MB

Induction heater for metal parts (excluding bearings). Can heat workpieces up to 600 kg.

SKF

TIH L77

Model: TIH L77

Induction heater with expanded heating area for extra-large bearings. Can heat bearings up to 1200 kg with 20 kVA.

SKF

TIH L77MB

Model: TIH L77MB

Induction heater for metal parts (excluding bearings). Can heat workpieces up to 600 kg.

SKF

TKBA 11

Model: TKBA 11

Red laser belt alignment tool that attaches magnetically to the side of pulleys. Consists of one transmitter unit and three targets.

SKF

TKBA 21

Model: TKBA 21

A device for laser belt alignment using a red laser, consisting of a transmitter unit and a receiver unit.

SKF

TKBA 31

Model: TKBA 31

A belt alignment tool using a highly visible green laser that can measure up to 6 m outdoors.

SKF

TKBA 40

Model: TKBA 40

A laser-based alignment tool that fits directly into the grooves of V-belt pulleys. Equipped with four sizes of V-guides.

SKF

TKSA 41

Model: TKSA 41

Shaft alignment tool with display unit, supporting automatic measurement and soft foot checks, and featuring QR code reading.

SKF

TKSA 71

Model: TKSA 71

A high-performance alignment tool with six apps, supporting horizontal and vertical shaft, machine train, and spacer shaft alignment.

SKF

TKSA 71/PRO

Model: TKSA 71/PRO

Premium model of the TKSA 71 with additional offset brackets, slide brackets and magnetic base included. Supplied in a trolley case.

SKF

TMBA G11

Model: TMBA G11

Heat-resistant gloves for handling heated bearings. Usable up to a maximum of 150°C.

SKF