SKF Automatic Lubricant Dispenser TLMR Series

Specifications

How to choose Single-point automatic lubricator

Points to check when selecting, with the values for this product (SKF Automatic Lubricant Dispenser TLMR Series).

1. 1. Select capacity and period to match discharge requirements

   This product: Lubricant Capacity 120 / 380 ml

   Match the required daily lubricant quantity to a combination of lubricant capacity (60 to 250 ml in listed models) and discharge period (1 to 24 months). The actual lubricant quantity is the capacity divided by the period, so calculate backward from the bearing's requirement and align the replacement interval with the maintenance plan to simplify management.

2. 2. Check the available range of discharge periods

   This product: Discharge period 1–24 ヶ月または連続

   Gas-driven models can be set from 1 to 12 months, and some electromechanical models can be set up to 24 months. Confirm whether the setting is dial-type and tool-free, and whether it can be changed or stopped midway, to ensure it can accommodate seasonal or operating condition changes.

3. 3. Choose the drive method based on environment and control

   Gas-driven types are suitable where power cannot be supplied or in hazardous areas, and some are ATEX certified. Electromechanical or wired types are better where temperature changes are large, where lubrication is needed only while the machine is running, or where PLC monitoring is required.

4. 4. Confirm discharge pressure is sufficient for pipe length

   This product: Maximum Operating Pressure 30 bar

   The maximum operating pressure of listed models is 5 to 30 bar. When lubricating from a distant position through piping, pressure loss increases, so a higher-pressure model is required. The maximum supply length varies greatly by product, up to 300 m for grease and up to 5 m for oil, so always verify it against the specifications.

5. 5. Match the thread standard of the lubrication point

   This product: Connection Thread G1/4 female

   Check that the connection thread matches the standard of the lubrication point (grease nipple mounting hole). If it does not match, an adapter is required, and a longer mounting assembly can cause loosening or breakage due to vibration, so verify the mounting space as well.

6. 6. Verify ambient temperature range and lubricant compatibility

   This product: Ambient temperature range -25 – +70 °C

   Confirm that the ambient temperature range covers the minimum and maximum temperatures at the installation site. Also confirm that the filled lubricant type suits the bearing conditions and, for food machinery, that it is NSF H1 food grade. For outdoor or washdown environments, also check the protection rating (IP code).

This guide was written by AI based on the listed products' documents and specification items.

About Single-point automatic lubricator and all products

Description

Maintains a discharge pressure of up to 30 bar throughout the entire discharge period and supports long-distance piping. Provides a discharge rate that is unaffected by temperature and allows settings of up to 24 months. Available as the battery-powered TLMR 101 and the 12-24 V DC powered TLMR 201, with IP67 or higher dust and water protection.

FAQ

Q. Can the SKF TLMR Series automatic lubricator deliver grease through long piping?

A. It maintains a discharge pressure of up to 30 bar throughout the entire discharge period and supports long-distance piping. The maximum supply length (grease) is 5 meters.

Q. What applications is the SKF TLMR Series suited for?

A. It is suited for applications with high lubricant consumption, applications involving significant vibration during operation, general machinery and food processing machinery, engine rooms and high-temperature fans, and wind turbines.

Q. What are the power supply options and dust and water protection ratings of the SKF TLMR Series?

A. Available as the battery-powered TLMR 101 and the 12-24 V DC powered TLMR 201. The protection ratings are IP 67 / IP 6k9k.

Q. What are the discharge rate and discharge period of the SKF TLMR Series?

A. The minimum discharge rate is 0,16 ml/day, the maximum discharge rate is 3,9 ml/day, and the continuous discharge rate is 31 ml/hour. The discharge period is 1–24 months or continuous, and the discharge rate is unaffected by temperature.

Q. What is the operating ambient temperature range and lubricant capacity of the SKF TLMR Series?

A. The ambient temperature range is -25 – +70 °C. The lubricant capacity is 120 / 380 ml.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKFメンテナンス製品と潤滑製品 204 pages Open page 174
  Found on: https://azuma-eg.com/catalogue/