SKF SYSTEM 24 Electric Single-Point Automatic Lubricator TLSD Series

Specifications

How to choose Single-point automatic lubricator

Points to check when selecting, with the values for this product (SKF SYSTEM 24 Electric Single-Point Automatic Lubricator TLSD Series).

1. 1. Select capacity and period to match discharge requirements

   This product: Lubricant Capacity 125 / 250 ml

   Match the required daily lubricant quantity to a combination of lubricant capacity (60 to 250 ml in listed models) and discharge period (1 to 24 months). The actual lubricant quantity is the capacity divided by the period, so calculate backward from the bearing's requirement and align the replacement interval with the maintenance plan to simplify management.

2. 2. Check the available range of discharge periods

   This product: Discharge period 1–12 ヶ月

   Gas-driven models can be set from 1 to 12 months, and some electromechanical models can be set up to 24 months. Confirm whether the setting is dial-type and tool-free, and whether it can be changed or stopped midway, to ensure it can accommodate seasonal or operating condition changes.

3. 3. Choose the drive method based on environment and control

   Gas-driven types are suitable where power cannot be supplied or in hazardous areas, and some are ATEX certified. Electromechanical or wired types are better where temperature changes are large, where lubrication is needed only while the machine is running, or where PLC monitoring is required.

4. 4. Confirm discharge pressure is sufficient for pipe length

   This product: Maximum Operating Pressure 5 bar

   The maximum operating pressure of listed models is 5 to 30 bar. When lubricating from a distant position through piping, pressure loss increases, so a higher-pressure model is required. The maximum supply length varies greatly by product, up to 300 m for grease and up to 5 m for oil, so always verify it against the specifications.

5. 5. Match the thread standard of the lubrication point

   This product: Connection Thread G1/4

   Check that the connection thread matches the standard of the lubrication point (grease nipple mounting hole). If it does not match, an adapter is required, and a longer mounting assembly can cause loosening or breakage due to vibration, so verify the mounting space as well.

6. 6. Verify ambient temperature range and lubricant compatibility

   This product: Ambient temperature range 0 – 50 (battery pack) °C

   Confirm that the ambient temperature range covers the minimum and maximum temperatures at the installation site. Also confirm that the filled lubricant type suits the bearing conditions and, for food machinery, that it is NSF H1 food grade. For outdoor or washdown environments, also check the protection rating (IP code).

This guide was written by AI based on the listed products' documents and specification items.

About Single-point automatic lubricator and all products

Description

Equipped with an electric drive and a discharge period setting wheel, it maintains a maximum of 5 bar throughout the entire discharge period. The transparent reservoir allows visual inspection, and status is shown by LED color. Cartridges of 125 ml and 250 ml can be selected as needed, and a battery pack is included. A support plate with a check valve for oil is also available separately.

FAQ

Q. What are the lubricant capacities and discharge periods of the TLSD Series (SKF SYSTEM 24 Electric Single-Point Automatic Lubricator)?

A. Lubricant capacities are 125 ml and 250 ml. The discharge period is 1 to 12 months.

Q. What are the minimum and maximum discharge rates and the ambient temperature range of the TLSD Series?

A. The minimum discharge rate is 0.3 / 0.7 ml/day, and the maximum discharge rate is 4.1 / 8.3 ml/day. The ambient temperature range is 0 to 50 °C (battery pack).

Q. What are the maximum operating pressure, protection rating, and connection thread specifications of the TLSD Series?

A. The maximum operating pressure is 5 bar, maintained at up to 5 bar throughout the entire discharge period. The protection rating is IP 65, and the connection thread is G1/4.

Q. How far can the TLSD Series supply grease and oil?

A. The maximum supply length is 3 meters for grease and 5 meters for oil.

Q. Is the TLSD Series suitable for critical machinery and applications in narrow or hazardous locations?

A. It is suited to critical machinery requiring very high reliability and additional monitoring, applications in narrow or hazardous locations, and machinery requiring large volumes of lubricant. It can lubricate from a remote location via electric drive, and allows visual inspection through the transparent reservoir and status indication by LED.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKFメンテナンス製品と潤滑製品 204 pages Open page 170
  Found on: https://azuma-eg.com/catalogue/