SKF LAGD Series Gas-Driven Lubricator 125ml

Specifications

LAGDシリーズ model comparison

Compare 2 models in the same series by specification.

How to choose Single-point automatic lubricator

Points to check when selecting, with the values for this product (LAGD 125/FG2).

1. 1. Select capacity and period to match discharge requirements

   This product: Lubricant Capacity 125 ml

   Match the required daily lubricant quantity to a combination of lubricant capacity (60 to 250 ml in listed models) and discharge period (1 to 24 months). The actual lubricant quantity is the capacity divided by the period, so calculate backward from the bearing's requirement and align the replacement interval with the maintenance plan to simplify management.

2. 2. Check the available range of discharge periods

   This product: Discharge period 1～12 ヶ月

   Gas-driven models can be set from 1 to 12 months, and some electromechanical models can be set up to 24 months. Confirm whether the setting is dial-type and tool-free, and whether it can be changed or stopped midway, to ensure it can accommodate seasonal or operating condition changes.

3. 3. Choose the drive method based on environment and control

   Gas-driven types are suitable where power cannot be supplied or in hazardous areas, and some are ATEX certified. Electromechanical or wired types are better where temperature changes are large, where lubrication is needed only while the machine is running, or where PLC monitoring is required.

4. 4. Confirm discharge pressure is sufficient for pipe length

   This product: Maximum Operating Pressure 5 bar

   The maximum operating pressure of listed models is 5 to 30 bar. When lubricating from a distant position through piping, pressure loss increases, so a higher-pressure model is required. The maximum supply length varies greatly by product, up to 300 m for grease and up to 5 m for oil, so always verify it against the specifications.

5. 5. Match the thread standard of the lubrication point

   Check that the connection thread matches the standard of the lubrication point (grease nipple mounting hole). If it does not match, an adapter is required, and a longer mounting assembly can cause loosening or breakage due to vibration, so verify the mounting space as well.

6. 6. Verify ambient temperature range and lubricant compatibility

   This product: Ambient temperature range -20～+60 ℃

   Confirm that the ambient temperature range covers the minimum and maximum temperatures at the installation site. Also confirm that the filled lubricant type suits the bearing conditions and, for food machinery, that it is NSF H1 food grade. For outdoor or washdown environments, also check the protection rating (IP code).

This guide was written by AI based on the listed products' documents and specification items.

About Single-point automatic lubricator and all products

Description

125ml model of the LAGD series, which delivers a constant grease quantity driven by gas pressure. FG2 indicates filling with LGFG 2.

FAQ

Q. What applications can the LAGD 125/FG2 be used for?

A. It can be used for lubricating conveyor bearings, packaging machinery, and bottling machinery.

Q. What lubricant is filled in the LAGD 125/FG2 and what food-grade standard does it meet?

A. The filled lubricant is LGFG 2 (multi-purpose food-grade, NSF H1). It is a gas-driven lubricator filled with NSF H1 food-grade grease.

Q. What are the lubricant capacity, discharge period, and operating conditions of the LAGD 125/FG2?

A. The lubricant capacity is 125 ml. The discharge period is adjustable from 1 to 12 months. The ambient temperature range is -20 to +60 ℃, and the maximum operating pressure is 5 bar.

Q. Can the LAGD 125/FG2 be used in explosive atmospheres?

A. It is ATEX certified.

Written by AI based on the content of the source documents.

Source documents

• Datasheet SKF食品グレード潤滑剤 汎用グリース LGFG 2 2 pages Open page 1
  Found on: https://azuma-eg.com/catalogue/
• Catalog SKF SYSTEM 24 - LAGDシリーズ ガス動作式シングルポイント自動給油/給脂装置 4 pages
  Found on: https://azuma-eg.com/catalogue/