Catalog Searcher
Categories

SKF LAGD Series Gas-Driven Lubricator 60 ml

Model LAGD 60/FG2 / LAGDシリーズ / SKF (Official website) / Listed on page 1 of the document

A 60 ml gas-driven lubricator filled with food-grade grease.

Last verified: (date the content was verified against the source document)

SKF LAGD Series Gas-Driven Lubricator 60 ml on page 1 of SKF "SKF食品グレード潤滑剤 汎用グリース LGFG 2"
Source: SKF「SKF食品グレード潤滑剤 汎用グリース LGFG 2」page 1
A reduced image of the relevant page is quoted from the document. Copyright belongs to SKF.Request removal

Specifications

Lubricant Capacity 60 ml
Discharge period 1～12 ヶ月
Ambient temperature range -20～+60 ℃
Maximum Operating Pressure 5 bar
Filled Lubricant LGFG 2 (multi-purpose food grade, NSF H1)

LAGDシリーズ model comparison

Compare 2 models in the same series by specification.

Model Lubricant Capacity Discharge period Maximum Operating Pressure Ambient temperature range Filled Lubricant
LAGD 125/FG2 125 ml 1～12 ヶ月 5 bar -20～+60 ℃ LGFG 2 (multi-purpose food grade, NSF H1)
LAGD 60/FG2 This product 60 ml 1～12 ヶ月 5 bar -20～+60 ℃ LGFG 2 (multi-purpose food grade, NSF H1)

How to choose Single-point automatic lubricator

Points to check when selecting, with the values for this product (LAGD 60/FG2).

  1. 1. Select capacity and period to match discharge requirements

    This product: Lubricant Capacity 60 ml

    Match the required daily lubricant quantity to a combination of lubricant capacity (60 to 250 ml in listed models) and discharge period (1 to 24 months). The actual lubricant quantity is the capacity divided by the period, so calculate backward from the bearing's requirement and align the replacement interval with the maintenance plan to simplify management.

  2. 2. Check the available range of discharge periods

    This product: Discharge period 1～12 ヶ月

    Gas-driven models can be set from 1 to 12 months, and some electromechanical models can be set up to 24 months. Confirm whether the setting is dial-type and tool-free, and whether it can be changed or stopped midway, to ensure it can accommodate seasonal or operating condition changes.

  3. 3. Choose the drive method based on environment and control

    Gas-driven types are suitable where power cannot be supplied or in hazardous areas, and some are ATEX certified. Electromechanical or wired types are better where temperature changes are large, where lubrication is needed only while the machine is running, or where PLC monitoring is required.

  4. 4. Confirm discharge pressure is sufficient for pipe length

    This product: Maximum Operating Pressure 5 bar

    The maximum operating pressure of listed models is 5 to 30 bar. When lubricating from a distant position through piping, pressure loss increases, so a higher-pressure model is required. The maximum supply length varies greatly by product, up to 300 m for grease and up to 5 m for oil, so always verify it against the specifications.

  5. 5. Match the thread standard of the lubrication point

    Check that the connection thread matches the standard of the lubrication point (grease nipple mounting hole). If it does not match, an adapter is required, and a longer mounting assembly can cause loosening or breakage due to vibration, so verify the mounting space as well.

  6. 6. Verify ambient temperature range and lubricant compatibility

    This product: Ambient temperature range -20～+60 ℃

    Confirm that the ambient temperature range covers the minimum and maximum temperatures at the installation site. Also confirm that the filled lubricant type suits the bearing conditions and, for food machinery, that it is NSF H1 food grade. For outdoor or washdown environments, also check the protection rating (IP code).

This guide was written by AI based on the listed products' documents and specification items.

About Single-point automatic lubricator and all products

Description

60 ml model of the LAGD Series, which delivers grease at a constant rate driven by gas pressure. FG2 denotes the LGFG 2 filled version.

Features

  • NSF H1 food-grade
  • Discharge period adjustable from 1 to 12 months
  • ATEX certified

Applications

  • Conveyor bearings
  • Packaging machinery
  • Bottling machinery

FAQ

Q. Can the LAGD 60/FG2 be used in food machinery?
A. Yes. The LAGD 60/FG2 is a gas-driven lubricator filled with NSF H1 food-grade grease. Applications indicated include conveyor bearings, packaging machinery, and bottling machinery.
Q. What are the lubricant capacity and discharge period of the LAGD 60/FG2?
A. The lubricant capacity is 60 ml, and the discharge period can be adjusted from 1 to 12 months.
Q. What are the usable temperature range and maximum operating pressure of the LAGD 60/FG2?
A. The ambient temperature range is -20 to +60 °C, and the maximum operating pressure is 5 bar.
Q. What grease is filled in the LAGD 60/FG2?
A. The filled lubricant is LGFG 2, a multi-purpose NSF H1 food-grade grease.
Q. Is the LAGD 60/FG2 ATEX certified?
A. Yes, it is ATEX certified.

Written by AI based on the content of the source documents.

Source documents

More products from SKF

See all →