SKF

TMBA G11ET

Model: TMBA G11ET

Ultra heat-resistant glove for handling high-temperature parts over long periods. Usable up to a maximum of 500 °C.

SKF

TMBA G11H

Model: TMBA G11H

Heat- and oil-resistant gloves for handling high-temperature components containing oil. Usable up to 250 °C.

SKF

TMBR

Aluminum heating ring for removing the inner ring of cylindrical roller bearings. Maximum temperature 300 °C.

SKF

TMJL 100DU

Model: TMJL 100DU

Hydraulic pump with digital pressure gauge. Maximum pressure 100 MPa, compatible with HMV 92E nuts.

SKF

TMJL 50DU

Model: TMJL 50DU

Hydraulic pump with digital pressure gauge. Maximum pressure 50 MPa, compatible with all HMV E nut sizes.

SKF

V-Packing / Rod Seal (S1012-M/S1012-T/S1012-T1/S1315-T/S2527-F/S2931-F/S32-P)

V-packing set for high-load hydraulic equipment. Used in combination with PTFE or resin adapters.

SKF

XL Hybrid Deep Groove Ball Bearing (d 110-180 mm)

Large hybrid deep groove ball bearing with a bore of 110 to 180 mm for large wind turbine generators.

SKF

Y-Bearing SKF ConCentra (YSP)

Y-bearing using SKF ConCentra locking technology. Recommended tightening torque for set screws is in the range of 2.5 to 3 Nm.

SKF

Y-Bearing with Tapered Bore (YSA)

Y-bearing with tapered bore, mounted using an adapter sleeve. Shows hook spanner dimensions and tightening angle for installation.

SKF

Y-Bearing with Eccentric Locking Collar (YEL/YET/YELAG)

Y-bearing fixed to the shaft with an eccentric locking collar. Mainly metric shaft diameters of 15 to 60 mm, with sealed and agricultural variants.

SKF

Y-Bearing with Set Screw (YAR/YAT/YARAG)

Y-bearing that fixes the inner ring to the shaft with set screws. Available for metric and inch shaft sizes, with many dimensions in the range of d 12 to 100 mm and 1/2 to 3 in.

SKF

Y-Bearing with Set Screw Threaded Hole Specifications

Table of inner ring threaded hole nominal dimensions and thread standards by bearing size for set screw type Y-bearings.

SKF

Technical Specifications of Y-Bearings (Standard Series)

Technical data for Y-bearings including set screw, eccentric collar, ConCentra locking and tapered bore types: tolerances, clearances, load calculation factors and speed limits.

SKF

Axial Rotary Seal R06-P

Model: R06-P

Axial seal installed on the shaft with an interference fit. Functions as a flinger under high-speed sliding to prevent foreign matter ingress.

SKF

Axial Rotary Seal R06-R

Model: R06-R

Axial seal with the same shape as R06-P, using SKF Ecorubber-based material to improve chemical resistance and heat resistance.

SKF

Axial Rotary Seal R07-P

Model: R07-P

An axial seal installed on the shaft with an interference fit. Wear resistance is enhanced with ECOPUR-based material.

SKF

Axial Rotary Seal R07-R

Model: R07-R

Axial seal with the same shape as R07-P, using SKF Ecorubber-based material to improve chemical resistance and heat resistance.

SKF

Axial Rotary Seal (R06/R07 Series)

An axial-type rotary seal that rotates with the shaft. Used to protect bearings in heavy industrial machinery.

SKF

Axial Lock Nut Socket

A lock nut socket with an inch-size square drive that can be used with power tools and torque wrenches.

SKF

Adapter Sleeve

A sleeve for positioning tapered bore bearings on the cylindrical seating surface of a cylindrical or stepped shaft. Available in metric and inch series, with a lock nut and fixing devices supplied as a complete set.

SKF

Inch-Dimension Adapter Sleeve (SNW/SNP Series)

Adapter sleeve for shafts in inch dimensions. Secures bearings with a threaded sleeve and lock nut. Shaft diameters range from 3/4 inch to 19 1/2 inch.

SKF

Inch-Series W Lock Washer

Inch-series lock washer. Available in nominal sizes W00 to W44 with varying inside diameter, outside diameter and thickness.

SKF

Inch-Series Single-Row Tapered Roller Bearings

Data sheet summarizing dimensions, basic load ratings, and permissible speeds of inch-series single-row tapered roller bearings with bore diameters from approximately 14.989 mm to 92.075 mm.

SKF

Inch-Series Shaft Adapter Sleeve (HE・HA Series)

An adapter sleeve for securing roller bearings to inch-series shafts. Used in combination with a lock nut and fixing device. Applicable shaft diameters are approximately 3/4 inch to 3 3/16 inch.

SKF

Impact Spanner

Impact spanner for large locknuts, used to tighten and loosen them by applying effective impact. Used in combination with a hammer.

SKF

Air-Driven Hydraulic Pump / Oil Injector THAP E Series

Hydraulic pump or oil injector driven by an air motor. Available in four pressure ratings and used for installing large couplings.

SKF

Oil Injector 226400 E Series

Model: 226400 E

Oil injector rated for 300 MPa/400 MPa, housed in a compact carrying case.

SKF

High-Pressure Hose Replacement Kit for Oil Injector

Model: 729101-CK1 / THAP 300-HK1 / THAP 400-HK1

A kit that replaces old high-pressure pipes with high-pressure hoses. Can be retrofitted to existing oil injectors.

SKF

Oil Jug LAOS Series

A series of containers and nozzle-equipped caps for storing and dispensing lubricating oil. The caps come in 10 colors to color-code oil types.

SKF

Blanking Plug for Oil Ducts and Vent Holes

Model: 233950 E / 729944 E / 1030816 E

A plug that seals holes subject to hydraulic pressure of up to 400 MPa.

SKF

Oil Check Monitor TMEH 1

Model: TMEH 1

Handheld monitor that measures changes in the dielectric constant of oil samples to track oil deterioration and contamination trends.

SKF

Oil Leveler LAHD Series

Model: LAHD 500 / LAHD 1000

Oil leveler that automatically maintains the oil level of oil baths at a constant level. Two models with capacities of 500 ml and 1000 ml.

SKF

Oil Storage Station

An oil storage unit with filtration that keeps oil clean from tank storage through to dispensing. Available in Standard and Superior types.

SKF

Guide Rings

Ring products used as guides for sliding parts. Listed in the table of contents of this document, but the body text is not included in the excerpt.

SKF

Guide Ring F02

Model: F02

Guide ring for rods and pistons. Can also be used as a flat washer or spacer.

SKF

Guide Ring F03

Model: F03

An L-shaped piston guide ring that combines the functions of a guide ring and a backup ring.

SKF

Guide Ring F04

Model: F04

Guide ring for rods with a shape equivalent to F03.

SKF

Guide Ring F05

Model: F05

Piston guide ring with inner collar. Available in split and non-split types.

SKF

Guide Ring F06

Model: F06

Rod guide ring with outer collar. Available with or without split.

SKF

Guide Ring F07

Model: F07

Piston guide ring with an inner circumferential groove. Available in split or non-split types.

SKF

Guide Ring F08

Model: F08

Rod guide ring with outer groove. Available in split and non-split types.

SKF

Guide Ring (F01 Rod/Piston Guide Ring)

Model: F01

Guide ring for rods and pistons in dynamic applications. Standard cut is 45°, with non-split and 90° cut types also available to order.

SKF

Cam Follower

Cam follower with a solid threaded stud for mounting to machine parts with a hexagon nut. Three basic designs: KR, NUKR, and PWKR. Dimensions are expressed by outer diameter D.

SKF

Cam Followers (KR/KRV/KRE/NUKR/PWKR)

Cam followers with outer diameters of 16 to 52 mm. Series include KR, KRV, KRE, NUKR, PWKR and others.

SKF

Accessories for Cam Followers

Grease fittings, hex nuts, relubrication plugs and centralized lubrication adapters for use with cam followers.

SKF

Quick Connect Coupling and Nipple (729831 A / THPC / 729100 / 729832 A / THPN)

Quick connect couplings and nipples for quickly and safely connecting hydraulic pumps and hoses to applications. Compatible with 100 MPa to 400 MPa.

SKF

Grease Gun 1077600

Model: 1077600

Manual grease gun, basic model TLGH 1, with an optional 300 mm hose fitted with a hydraulic gripping nozzle. Maximum pressure 400 bar.

SKF

Grease Gun LAGH 400

Model: LAGH 400

Single-hand operated manual grease gun with a maximum pressure of 300 bar. Equipped with a 300 mm flexible hose.

SKF

Grease Gun TLGH 1

Model: TLGH 1

One-handed manual grease gun dispensing up to 400 bar, usable with grease refill or grease cartridges.

SKF

Grease Gun Set 1077600/SET

Model: 1077600/SET

Set comprising grease gun 1077600 with extension tube, snap-on hose, and nozzles. Maximum 400 bar.

SKF

Grease Test Kit TKGT 1

Model: TKGT 1

A portable analysis kit for testing grease consistency, oil separation, and contamination on site. Requires only 0.5 g of sample.

SKF

Grease Nipple Kit LAGN 120

Model: LAGN 120

Conical grease nipple kit containing 120 pieces with galvanized, hardened, and chrome-plated finish.

SKF

Grease Nipple Caps and Tags TLAC 50

Model: TLAC 50

A set of caps and tags that protects grease nipples from contamination and identifies lubrication points. Available as a 5-color cap version and printable stickers.

SKF

Grease Nozzle Kit LAGS 8

Model: LAGS 8

A practical accessory kit of nozzles, tubes and nipples used for connecting to various grease nipples.

SKF

LAGG Series Grease Pump

Manual and air-driven bulk grease pumps compatible with 18 kg, 50 kg and 180 kg grease cans.

SKF

Grease Meter LAGM 1000E

Model: LAGM 1000E

Electronic grease meter that measures grease discharge volume or weight. Supports up to 700 bar.

SKF

Grease Filling Pump LAGF Series

A low-pressure grease filling pump for cleanly filling grease guns from drums. Two models: LAGF 18 and LAGF 50.

SKF

Rubber Anti-Vibration Ring (RIS 2 Series)

Model: RIS 203~RIS 208 A

A NBR rubber accessory fitted between the outer ring of a Y-bearing and the housing bore, reducing vibration and noise while absorbing shaft thermal expansion and misalignment.

SKF

Combi Kit TMMK 10-35

Model: TMMK 10-35

A multi-purpose kit for fitting and removing deep groove ball bearings with bore diameters of 10 to 35 mm on shafts and housings.

SKF

Combi Kit TMMK 20-50

Model: TMMK 20-50

A multi-purpose kit for fitting and removing deep groove ball bearings with a bore of 20 to 50 mm on shafts and housings.

SKF