SKF

Spherical Roller Bearings (d 900～1250mm)

Large spherical roller bearings with bore diameters of 900～1250mm. Available with cylindrical and tapered bores, designed for heavy loads and large machinery requiring self-alignment.

SKF

SKF Explorer Spherical Roller Bearings

Spherical roller bearing series with bore diameters of 100 to 850 mm. Available with cylindrical and tapered bores, this bearing group is intended for load support in large machinery.

SKF

Spherical Roller Bearing with Adapter Sleeve Assemblies

Spherical roller bearings with adapter sleeves. Covers a wide bore range of 20 to 1000 mm as a series.

SKF

Spherical Roller Bearing Assemblies with Adapter Sleeves

Spherical roller bearings with withdrawal sleeves. Series covering bore diameters of approximately 35 to 900 mm are listed together.

SKF

Precision Lock Nut (KMK Series, KMFE Series, KMT(A) Series, KMD Series)

Precision lock nut for securing bearings to a shaft. Available in four types: integrated fixing type, set screw type, locking pin type, and axial set screw type, each providing fixing force suited to the application.

SKF

Back-to-Back Tapered Roller Bearings

Back-to-back tapered roller bearings with bore diameters of 40 to 180 mm. Dimension table listing dimensions, basic load ratings, and limiting speeds.

SKF

Back-to-Back Tapered Roller Bearings (Bore Diameter 190–260 mm)

Back-to-back tapered roller bearings with bore diameters of 190–260 mm. Dimension table listing dimensions and basic load ratings.

SKF

Self-Aligning Ball Bearing

A rolling bearing with two rows of balls and a common spherical outer ring, less affected by shaft misalignment. Low friction keeps the temperature rise limited at high rotational speeds.

SKF

Self-Aligning Ball Bearings (Open Type, Cylindrical Bore/Tapered Bore)

Self-aligning ball bearings with bore diameters of 5 to 240 mm. Dimensions and basic load ratings differ by bearing number. The series is available in both cylindrical bore and tapered bore types.

SKF

Self-Aligning Ball Bearings and Adapter Sleeves

Combination table of self-aligning ball bearings and adapter sleeves with bore diameters of 17 to 115 mm. Used for mounting on shafts.

SKF

Universal Hook Spanner HNA Series

Universal hook spanner that fits several nut sizes with a single unit. A set of four covers a wide range of nuts.

SKF

Thin Universal Raceway Disc AS Series

Thin raceway disc, 1 mm thick, for shaft diameters of 4 to 160 mm, made of hardened spring steel. Provides rigidity even when adjacent components are not hardened, enabling an economical bearing configuration.

SKF

Double-Row Angular Contact Ball Bearings (32..A, 33..A, 33..D Series)

Double-row angular contact ball bearings with bore diameters of 10 to 110 mm. Dimensions, load ratings, and rotational speeds are listed.

SKF

Double-Row Cam Roller

Cam roller based on double-row angular contact ball bearing dimension series 32, with a 30° contact angle. Grease-filled with steel plate shields.

SKF

Double-Row Cam Roller 3058..C-2Z

Double-row cam rollers with outer diameters of 32 to 80 mm. Available in crowned and cylindrical profiles, they function as bearings supporting rotating parts.

SKF

Double-Row Deep Groove Ball Bearing

Double-row deep groove ball bearing with bore diameter of 10 to 90 mm. High load capacity, supports radial loads and loads in both axial directions.

SKF

Double-Row Full Complement Cylindrical Roller Bearing

A double-row full complement cylindrical roller bearing. Non-separable type; NNF type has seals and is used for axial location in both directions.

SKF

Double-Row Full Complement Cylindrical Roller Bearing NNCF Type

Double-row full complement cylindrical roller bearing with bore diameter of 20 to 400 mm. Outer ring has no flange and does not support axial load. Available in NNCF, NNC, and NNCL types.

SKF

NNCL Type Double-Row Full Complement Cylindrical Roller Bearing

Double-row full complement cylindrical roller bearing with bore diameter of 60 to 400 mm. The outer ring has no flange, and it is used for axial positioning applications.

SKF

Double-Row Full Complement Cylindrical Roller Bearing NNC Type

Double-row full complement cylindrical roller bearing with bore diameter of 60 to 400 mm. Both inner and outer rings have flanges, allowing axial displacement.

SKF

Double-Acting Rotary Seal R03-P

Model: R03-P

Symmetrical-section oscillating compact rotary seal for high-pressure applications. Capable of separating different fluids on each side.

SKF

Double-Acting Rotary Seal R03-R

Model: R03-R

Double-acting rotary seal for high-pressure applications. Uses SKF Ecorubber-based materials to enhance chemical and heat resistance.

SKF

Double-Acting Rotary Seal R04-A

Model: R04-A

Left-right symmetrical cross-section oscillating compact rotary seal. Has a dynamic sealing surface on the inner circumference side.

SKF

Double-Acting Rotary Seal R05-A

Model: R05-A

Compact oscillating rotary seal with symmetrical cross-section. Features a dynamic sealing surface on the outer periphery.

SKF

Double-Acting Rotary Seal R09-F

Model: R09-F

Oscillating rotary seal composed of an O-ring and a slide ring. Reduces friction and is used in rotary joints of machine tools.

SKF

Double-Acting Rotary Seal R09-FS

Model: R09-FS

A rotary seal with the R09-F profile that uses a special-profile Energizer in place of an O-ring, designed for severe operating conditions.

SKF

Double-Acting Rotary Seal R10-F

Model: R10-F

Oscillating rotary seal composed of an O-ring and a slide ring, with a dynamic sealing face on the outer circumference.

SKF

Double-Acting Rotary Seal R10-FS

Model: R10-FS

A rotary seal for harsh operating conditions that features the R10-F shape and uses a special-profile energizer instead of an O-ring.

SKF

Double-Acting Wiper Seal A26-F

Model: A26-F

Double-acting wiper seal with built-in O-ring. Reduces friction and follows rod eccentricity.

SKF

Double-Acting Wiper Seal A27-F

Model: A27-F

O-ring energized wiper seal for double-acting applications. Compensates for radial eccentricity and reduces oil film with an inner lip.

SKF

Combined Needle Roller Bearing (Needle Roller/Angular Contact Ball Bearing, Needle Roller/Thrust Ball Bearing)

A fixed-side bearing that combines a radial needle roller bearing with a thrust bearing, enabling simultaneous radial and axial load support.

SKF

Double Direction Thrust Ball Bearing

Double direction thrust ball bearings with bore diameters of 10 to 150 mm. Designed for applications supporting axial loads in both directions.

SKF

Self-Aligning Needle Roller Bearings (PNA/RPNA)

Self-aligning needle roller bearing with a spherical outer ring outside diameter. Absorbs static misalignment of the shaft relative to the housing.

SKF

Self-Aligning Needle Roller Bearing, Without Inner Ring (RPNA)

Self-aligning needle roller bearing without inner ring, with bore diameter Fw 15 to 45 mm.

SKF

Self-Aligning Needle Roller Bearing with Inner Ring

Self-aligning needle roller bearing with bore diameter of 12 to 40 mm. Includes inner ring and mounting dimension information.

SKF

Single-Direction Thrust Ball Bearing with Self-Aligning Housing Washer and Raceway

Single-direction thrust ball bearing with self-aligning housing washer and raceway, bore diameter 12 to 140 mm. Equipped with a seat washer to accommodate alignment during mounting.

SKF

Self-Aligning Housing Washer Double Direction Thrust Ball Bearing

Self-aligning housing washer double direction thrust ball bearing with bore diameter 25 to 80 mm. Equipped with seat washer to accommodate alignment.

SKF

Ultrasonic Leak Detector TKSU 10

Model: TKSU 10

A portable device that detects leaks in compressed air and vacuum systems using ultrasound. Sensitivity adjustment and OLED display support quantifying leaks and prioritizing repairs.

SKF

Ultrasonic Lubrication Checker TLGU 10

Model: TLGU 10

Ultrasonic checker that verifies re-lubrication quantity for bearings using ultrasonic technology. Connects to a grease gun for use; grease gun not included.

SKF

Ultra-High/Low Temperature Y-Bearing (Inch-Series Shaft)

Ultra-high/low temperature Y-bearing for inch-series shafts. Compatible with shaft diameters of 3/4 to 3 inches.

SKF

Ultra-High/Low Temperature Y-Bearing (Metric Shaft)

Ultra-high/low temperature Y-bearing for metric shafts. Accommodates shaft diameters of 20 to 80 mm.

SKF

Ultra-High and Low Temperature Single-Row Deep Groove Ball Bearings

A series of single-row deep groove ball bearings usable in ultra-high temperature and cryogenic environments. Offered in a wide range of bore sizes from 10 to 120 mm.

SKF

Bearing Packer VKN 550

Model: VKN 550

A bearing packer that fully fills grease between the rolling elements of open-type bearings such as tapered roller bearings.

SKF

Hydraulic Fluid for Bearing Mounting and Dismounting LHMF 300 / LHDF 900

Model: LHMF 300 / LHDF 900

Hydraulic fluid for hydraulic tools. LHMF 300 is for mounting, LHDF 900 is for dismounting.

SKF

TMFT 36 Bearing Installation Tool Kit

Model: TMFT 36

A built-in tool kit for quickly and accurately fitting bearings with bore diameters of 10–55 mm. Stores 36 impact rings, 3 sleeves and a hammer.

SKF

Y-Bearing for Agricultural Applications

Y-bearing designed for harsh agricultural machinery such as combines and balers. Features 5-lip seals on both sides and VT307 grease fill to extend service life and improve resistance to wet environments. Dimensionally interchangeable with standard Y-bearings and requires no re-greasing.

SKF

Needle Roller

Needle rollers with diameters of 1 to 6 mm. Dimensions and mass by roller length are listed in a table.

SKF

Needle Roller/Angular Contact Ball Bearing

Composite bearing combining needle rollers and angular contact balls, with an inner diameter of 12 to 70 mm. Supports both radial and axial loads.

SKF

Needle Roller / Thrust Cylindrical Roller Bearing

Thrust cylindrical roller bearing with bore diameter of 15 to 50 mm. Capable of supporting large axial loads.

SKF

Needle Roller / Thrust Ball Bearing, Cage-Equipped Thrust Bearing

Cage-equipped thrust bearing with bore diameter of 10 to 70 mm. Accepts both radial and axial loads.

SKF

Needle Roller/Thrust Ball Bearings, Full Complement Thrust Bearings

Full complement thrust bearings combining needle rollers and thrust balls, with bore diameters of 7 to 35 mm. They accept both radial and axial loads.

SKF

Inner Ring for Needle Roller Bearings

Inner rings for needle roller bearings with bore diameters of 5 to 45 mm. Numerous types with varying widths and designs are listed.

SKF

High-Pressure Hose 729126 / 729834 / THAP 300-H/2 / THHP 300-2H / THAP 400-H/2

High-pressure hose for connecting SKF hydraulic pumps and injectors. Maximum working pressure from 100 MPa to 400 MPa.

SKF

High-Performance Hydraulic Spindle TMHS 100

Model: TMHS 100

Integrated hydraulic spindle with a maximum pulling force of 100 kN and an 80 mm stroke, suitable for long pulling operations.

SKF

High-Performance Hydraulic Spindle TMHS 75

Model: TMHS 75

An integrated hydraulic cylinder and pump spindle that generates a large pulling force with light effort.

SKF

High-Temperature Insert Bearing

High-temperature insert bearing that can be fixed to the inner ring with a set screw. Available in metric and inch series with bore diameters of 20 to 60 mm.

SKF

High-Temperature Deep Groove Ball Bearings

A series of deep groove ball bearings for use in high-temperature environments. Offers a wide range of sizes with bore diameters of 12 to 120 mm, with shielded and open type variations.

SKF

High-Temperature Ball Bearing Unit, Diamond Flange Housing, Inch Series (VA201/VA228)

Inch-series diamond flange ball bearing unit for use in high-temperature environments. Available in heat-resistant VA201 and VA228 specifications; no re-greasing required.

SKF

High-Temperature Ball Bearing Unit, Diamond-Shaped Flange Housing, Metric Series (VA201/VA228)

Metric diamond-shaped flange ball bearing unit for use in high-temperature environments. Available in heat-resistant VA201 and VA228 specifications; no re-greasing required.

SKF

High-Temperature Ball Bearing Unit, Square Flange Housing, Inch Series (VA201/VA228)

Inch-series square flange ball bearing unit for use in high-temperature environments. Available in two heat-resistant specifications, VA201 (130 to 250°C) and VA228 (260 to 350°C), and requires no relubrication.

SKF