Machine Fixing Z-Bracket

Specifications

How to choose Anti-tip products

Points to check when selecting, with the values for this product (Machine Fixing Z-Bracket).

1. 1. Select a height H that matches the fixing point

   This product: Height H 20 to 100 mm

   The bracket height H should match the height from the floor of the base or feet of the equipment being secured. A mismatch creates gaps, leading to rattling and poor fixing. Listed products range from 20 to 300 mm, and corner brackets are available in multiple part numbers from 100 to 300 mm.

2. 2. Use plate thickness as a guide to holding strength

   This product: Plate thickness t 4.5・6.0 mm

   The body plate thickness is directly linked to bracket rigidity, and thicker plates are advantageous for heavier equipment or locations with large vibration. Listed examples include 4.5 mm as well as 6.0 mm products. Select based on equipment mass and the anticipated load.

3. 3. Check installation space with length L1

   This product: Length L1 120 to 160 mm

   The body length L1 relates to the distance from the outer perimeter of the equipment to the floor anchor position and to interference with surrounding piping and walkways. Listed products measure 120 to 160 mm. Also confirm that anchor positions do not interfere with floor joints or embedded objects.

4. 4. Verify base plate dimensions and hole positions

   The thickness × width × length of the base plate that contacts the floor affects the number and placement of anchor bolts and the distribution of load on the floor. Check in the drawings that the dimensions allow the required anchor diameter and edge distance.

5. 5. Match material and surface treatment to the environment

   This product: Material SS400

   Body material is typically general structural steel such as SS400, protected against corrosion by baked paint. In locations exposed to water or chemicals, be aware that deterioration of the paint can accelerate rust. For products with a stated service life, 8 years is the guideline for listed products.

6. 6. Use dedicated stoppers for casters-equipped devices

   Anchor fixing is difficult for casters-equipped devices such as copiers and racks, so movement is restricted with stoppers inserted into the casters. Paper products and similar items have different strength from metal brackets, so confirm that the stopper suits the weight of the equipment and the caster shape.

This guide was written by AI based on the listed products' documents and specification items.

About Anti-tip products and all products

Description

Made of SS400 with baked enamel (yellow) finish. Available in 10 part numbers with different heights. Limited stock item. Price on request.

FAQ

Q. What are the material and finish of the Machine Fixing Z-Bracket (99-0190 to 99-0199)?

A. The material is SS400, with a baked enamel (yellow) finish.

Q. What are the plate thickness, length, and height ranges of the Machine Fixing Z-Bracket (99-0190 to 99-0199)?

A. Plate thickness t is 4.5 mm and 6.0 mm, length L1 is 120 to 160 mm, and height H is 20 to 100 mm. There are 10 part numbers with different heights.

Q. What applications can the Machine Fixing Z-Bracket (99-0190 to 99-0199) be used for?

A. It can be used to prevent equipment from toppling during earthquakes and for floor fixing of machinery.

Written by AI based on the content of the source documents.

Source documents

• Catalog スプリングネット 製品カタログ（ページ抜粋） 43 pages Open page 32
  Found on: https://www.samini.co.jp/catalog_list/