Machine Fixing Corner Bracket

Specifications

How to choose Anti-tip products

Points to check when selecting, with the values for this product (Machine Fixing Corner Bracket).

1. 1. Select a height H that matches the fixing point

   This product: Height H 100 to 300 mm

   The bracket height H should match the height from the floor of the base or feet of the equipment being secured. A mismatch creates gaps, leading to rattling and poor fixing. Listed products range from 20 to 300 mm, and corner brackets are available in multiple part numbers from 100 to 300 mm.

2. 2. Use plate thickness as a guide to holding strength

   The body plate thickness is directly linked to bracket rigidity, and thicker plates are advantageous for heavier equipment or locations with large vibration. Listed examples include 4.5 mm as well as 6.0 mm products. Select based on equipment mass and the anticipated load.

3. 3. Check installation space with length L1

   The body length L1 relates to the distance from the outer perimeter of the equipment to the floor anchor position and to interference with surrounding piping and walkways. Listed products measure 120 to 160 mm. Also confirm that anchor positions do not interfere with floor joints or embedded objects.

4. 4. Verify base plate dimensions and hole positions

   This product: Base plate dimensions 6×75×110・9×125×150 mm

   The thickness × width × length of the base plate that contacts the floor affects the number and placement of anchor bolts and the distribution of load on the floor. Check in the drawings that the dimensions allow the required anchor diameter and edge distance.

5. 5. Match material and surface treatment to the environment

   This product: Material SS400

   Body material is typically general structural steel such as SS400, protected against corrosion by baked paint. In locations exposed to water or chemicals, be aware that deterioration of the paint can accelerate rust. For products with a stated service life, 8 years is the guideline for listed products.

6. 6. Use dedicated stoppers for casters-equipped devices

   Anchor fixing is difficult for casters-equipped devices such as copiers and racks, so movement is restricted with stoppers inserted into the casters. Paper products and similar items have different strength from metal brackets, so confirm that the stopper suits the weight of the equipment and the caster shape.

This guide was written by AI based on the listed products' documents and specification items.

About Anti-tip products and all products

Description

Structure with an L-angle welded to a base plate. Made of SS400 with baked coating (yellow). Price upon request. M10 or larger anchors recommended for concrete floors.

FAQ

Q. For what kind of equipment and how can the Machine Fixing Corner Bracket (99-0200 to 99-0207) be used?

A. It is an L-shaped bracket that secures the four corners of equipment that cannot be fixed with press brackets. It is used for four-corner fixing of equipment and prevention of machine tipping.

Q. What are the material, height, and base plate dimensions of the Machine Fixing Corner Bracket (99-0200 to 99-0207)?

A. The material is SS400. There are 6 part numbers with height H of 100 to 300 mm, and the base plate dimensions are 6 x 75 x 110 mm and 9 x 125 x 150 mm.

Q. What is the structure and surface finish of the Machine Fixing Corner Bracket (99-0200 to 99-0207)?

A. It has an L-angle welded to a base plate. The finish is baked coating (yellow).

Q. Are there any recommendations for installing the Machine Fixing Corner Bracket (99-0200 to 99-0207) on a concrete floor?

A. M10 or larger anchors are recommended for concrete floors.

Written by AI based on the content of the source documents.

Source documents

• Catalog スプリングネット 製品カタログ（ページ抜粋） 43 pages Open page 33
  Found on: https://www.samini.co.jp/catalog_list/