Centering Collar Thrust Needle Roller Bearing AXW

Specifications

AXW model comparison

Compare 2 models in the same series by specification.

How to choose Rolling Bearings

Points to check when selecting, with the values for this product (Centering Collar Thrust Needle Roller Bearing AXW).

1. 1. Bore and housing bore dimensions

   This product: Inner diameter d 10〜50 mm

   Select the bore diameter d to match the shaft seat, the outside diameter D to match the housing bore, and the width B to suit the installation space. Main dimensions are standardized in ISO and JIS dimension series, so interchangeable products can be found by boundary dimension designation. For tapered roller bearings, also check the assembled width T; for thrust bearings, also check the height H.

2. 2. Dynamic load rating based on life calculation

   This product: Basic dynamic load rating Cr 8.5〜28.5 kN

   The basic dynamic load rating Cr is the reference value for calculating rated life. Verify that the required life is met using the equivalent load during operation and the rotational speed. For ball bearings, life is proportional to the cube of the load ratio, so providing load margin greatly extends life.

3. 3. Margin for static and shock loads

   The basic static load rating C0r is the allowable standard for permanent deformation generated at the rolling elements and raceways under stationary or low-speed conditions. For applications with oscillating motion or shock loads, confirm that a static safety factor against the maximum load is secured using C0r.

4. 4. Operating speed and lubrication method

   This product: Limiting speed (grease lubrication) 2400〜4800 r/min

   The limiting speed differs by lubrication method, and separate values are given for grease lubrication and oil lubrication. Confirm that the normal operating speed does not exceed the limiting value, and in high-speed ranges also consider cage material and precision grade. The reference speed can also be consulted as a thermal guideline.

5. 5. Precision grade and internal clearance

   Precision grades (P0, P6, P5, etc.) indicate rotational accuracy and dimensional accuracy; for high-precision applications such as machine tool spindles, select higher grades. Internal clearance (C2, CN, C3, etc.) is selected to allow for changes caused by interference fit and temperature differences during operation.

6. 6. Materials and lubrication suited to the environment

   For corrosive, high-temperature, vacuum, or clean environments, select specifications such as rings and rolling elements made of stainless steel or ceramics, or solid lubricants and fluorine grease for vacuum use. Check the operating temperature range, low dust generation, and whether food-grade grease registration applies against the application conditions.

This guide was written by AI based on the listed products' documents and specification items.

About Rolling Bearings and all products

Description

Dimensions, basic dynamic load rating, limiting speed, and mass of the AXW series of centering collar thrust needle roller bearings, together with dimensions of matching raceways, are listed.

FAQ

Q. What is the range of inner diameter for the AXW series of centering collar thrust needle roller bearings?

A. The inner diameter d is 10 to 50 mm.

Q. What are the basic dynamic load rating and limiting speed of the AXW series?

A. The basic dynamic load rating Cr is 8.5 to 28.5 kN, and the limiting speed (grease lubrication) is 2400 to 4800 r/min.

Q. What applications is the AXW series of centering collar thrust needle roller bearings used for?

A. They are used for thrust support of rotating parts. The centering structure is a key feature.

Written by AI based on the content of the source documents.

Source documents

• Catalog SKF スラスト針状ころ軸受 設計・製品データ(12章抜粋) 20 pages Open page 19
  Found on: https://azuma-eg.com/catalogue/