SKF TLSD Series Electric Lubricator 250ml

Specifications

TLSDシリーズ model comparison

Compare 4 models in the same series by specification.

How to choose Single-point automatic lubricator

Points to check when selecting, with the values for this product (TLSD 250/FG2).

1. 1. Select capacity and period to match discharge requirements

   This product: Lubricant Capacity 250 ml

   Match the required daily lubricant quantity to a combination of lubricant capacity (60 to 250 ml in listed models) and discharge period (1 to 24 months). The actual lubricant quantity is the capacity divided by the period, so calculate backward from the bearing's requirement and align the replacement interval with the maintenance plan to simplify management.

2. 2. Check the available range of discharge periods

   Gas-driven models can be set from 1 to 12 months, and some electromechanical models can be set up to 24 months. Confirm whether the setting is dial-type and tool-free, and whether it can be changed or stopped midway, to ensure it can accommodate seasonal or operating condition changes.

3. 3. Choose the drive method based on environment and control

   Gas-driven types are suitable where power cannot be supplied or in hazardous areas, and some are ATEX certified. Electromechanical or wired types are better where temperature changes are large, where lubrication is needed only while the machine is running, or where PLC monitoring is required.

4. 4. Confirm discharge pressure is sufficient for pipe length

   The maximum operating pressure of listed models is 5 to 30 bar. When lubricating from a distant position through piping, pressure loss increases, so a higher-pressure model is required. The maximum supply length varies greatly by product, up to 300 m for grease and up to 5 m for oil, so always verify it against the specifications.

5. 5. Match the thread standard of the lubrication point

   Check that the connection thread matches the standard of the lubrication point (grease nipple mounting hole). If it does not match, an adapter is required, and a longer mounting assembly can cause loosening or breakage due to vibration, so verify the mounting space as well.

6. 6. Verify ambient temperature range and lubricant compatibility

   Confirm that the ambient temperature range covers the minimum and maximum temperatures at the installation site. Also confirm that the filled lubricant type suits the bearing conditions and, for food machinery, that it is NSF H1 food grade. For outdoor or washdown environments, also check the protection rating (IP code).

This guide was written by AI based on the listed products' documents and specification items.

About Single-point automatic lubricator and all products

Description

250 ml model of the TLSD series, an electric lubricator that dispenses grease automatically.

FAQ

Q. What applications can the TLSD 250/FG2 be used for?

A. It can be used for conveyor bearings, packaging machinery, and bottling machinery.

Q. What grease can be filled into the TLSD 250/FG2?

A. It is an electric lubricator for filling food-grade grease, 250 ml model.

Q. What is the lubricant capacity of the TLSD 250/FG2?

A. The lubricant capacity is 250 ml.

Written by AI based on the content of the source documents.

Source documents

• Datasheet SKF食品グレード潤滑剤 汎用グリース LGFG 2 2 pages Open page 1
  Found on: https://azuma-eg.com/catalogue/