Machine Parts

Single-Row Deep Groove Ball Bearings with Snap Ring Groove and Snap Ring

Single-row deep groove ball bearings with snap ring groove, bore 25-95 mm. Available in open, one-side shielded, and both-side shielded types. Snap ring (SP) allows easy axial positioning.

SKF

Double-Row Deep Groove Ball Bearing

Double-row deep groove ball bearing with bore diameter of 10 to 90 mm. High load capacity, supports radial loads and loads in both axial directions.

SKF

Y-Bearing with Set Screws

A Y-bearing fixed to the shaft by two set screws positioned 120° apart on the inner ring. Also usable in applications where the direction of rotation is not constant. Available in YAT 2 with a wide inner ring on one side and YAR 2 with wide inner ring on both sides.

SKF

Y-Bearing with Eccentric Locking Collar

Y-bearing that locks to the shaft with an eccentric locking collar. Mainly intended for applications where the direction of rotation does not change.

SKF

SKF ConCentra Y-Bearing

A locking-resistant Y-bearing that achieves precise concentric fit on the shaft using ConCentra locking technology.

SKF

Sealed Single-Row Deep Groove Ball Bearings (2RZ, 2RS1, 2Z Seals) d 80–160 mm

A series of sealed single-row deep groove ball bearings with bore diameters of 80–160 mm. Fitted with contact seals and shields, with dimensions, basic load ratings, limiting speeds and masses shown for each bearing number.

SKF

ICOS Oil Seal Bearing Unit

Oil seal bearing unit with bore diameter of 12 to 30 mm. Dimensions, basic load ratings and limiting speeds are listed for each model number.

SKF

Single-Row Deep Groove Ball Bearings with Snap Ring Groove (N, NR), d 10-120 mm

A series of single-row deep groove ball bearings with snap ring groove, with inner diameters of 10-120 mm. Available in groove-only (N) and snap ring-fitted (NR) types, with dimensions of the snap ring (SP) also shown.

SKF

Single-Row Deep Groove Ball Bearings with Snap Ring and Shield (ZNR, 2ZNR) d 10-60 mm

A series of single-row deep groove ball bearings with inner diameters of 10-60 mm, equipped with a snap ring and shields. Available with a single-side shield (ZNR) or a double-side shield (2ZNR).

SKF

Deep Groove Ball Bearing with Snap Ring and Shield, Single Row

Deep groove ball bearing with snap ring and shields, bore diameter 65 to 70 mm. SKF Explorer bearing with dynamic load ratings, limiting speeds and other data listed by dimension.

SKF

Stainless Steel Deep Groove Ball Bearing

Stainless steel deep groove ball bearings with bore diameters of 0.6 to 50 mm. A series offering a wide range of dimensions from small to medium diameters.

SKF

Sealed Stainless Steel Deep Groove Ball Bearing

Stainless steel sealed deep groove ball bearing with bore diameter of 1.5 to 8 mm. Small-diameter bearing with shield (2Z, 2ZS) or rubber seal (2RS1).

SKF

Sealed Single-Row Deep Groove Ball Bearings, d 30–35 mm

Sealed single-row deep groove ball bearings with a bore of 30 to 35 mm. Available with sealing arrangements such as 2Z, 2RZ and 2RS1, including SKF Explorer bearings.

SKF

Sealed Single-Row Deep Groove Ball Bearings d 35–45 mm

Sealed single-row deep groove ball bearings with a bore diameter of 35 to 45 mm. Available with sealing arrangements such as 2Z, 2RZ and 2RS1, including SKF Explorer bearings.

SKF

Sealed Single-Row Deep Groove Ball Bearings, d 45–55 mm

Sealed single-row deep groove ball bearings with bore diameter 45 to 55 mm. Sealing types include 2Z, 2RZ and 2RS1, and the range includes SKF Explorer products.

SKF

Sealed Single-Row Deep Groove Ball Bearings, d 55–65 mm

Sealed single-row deep groove ball bearings with bore diameters of 55 to 65 mm. Available with sealing types such as 2Z, 2RZ and 2RS1, including SKF Explorer bearings.

SKF

Sealed Single-Row Deep Groove Ball Bearings d 65–75 mm

Sealed single-row deep groove ball bearings with bore diameter 65–75 mm. Available with sealing types such as 2Z, 2RZ and 2RS1, including SKF Explorer bearings.

SKF

Sealed Single-Row Deep Groove Ball Bearings d 80–90 mm

Sealed single-row deep groove ball bearings with bore diameter 80–90 mm. Sealing types include 2RZ, 2RS1 and 2Z, and the range includes SKF Explorer bearings.

SKF

SKF Quiet Running Deep Groove Ball Bearing (VQ658)

Model: VQ658

A quiet running deep groove ball bearing for demanding noise requirements such as wind turbine generators.

SKF

SKF Single-Row Deep Groove Ball Bearings (Boundary Dimensions d 3–10 mm)

A series of small-bore single-row deep groove ball bearings with bore diameters of 3 to 10 mm. Outside diameter, width, basic load ratings, and limiting speeds are listed for each bearing number.

SKF

Single-Row Deep Groove Ball Bearings

A series of single-row deep groove ball bearings with bore diameters of 12 to 240 mm. Basic load ratings, limiting speeds, mass and other data can be compared by bore, outside diameter and width.

SKF

Sealed Single-Row Deep Groove Ball Bearings

A series of sealed deep groove ball bearings with bore diameters from 3 to 15 mm, covering small to medium sizes. Specifications are listed for each seal type, such as Z and RS.

SKF

Sealed Single-Row Deep Groove Ball Bearings, d 17–20 mm

Sealed single-row deep groove ball bearings with bore diameter 17–20 mm. Available with 2Z, 2RZ, 2RS1 and other seal types, including SKF Explorer and energy-efficient variants.

SKF