Machine Parts

Small One-Way Clutch 1WC0815

Model: 1WC0815

A high-load small one-way clutch with metal spring. For 8 mm shaft diameter, with torque capacity of 2.65 N-m.

JTEKT Corporation

Small One-Way Clutch EWC1010C

Model: EWC1010C

High-load small one-way clutch with synthetic resin spring. For 10 mm shaft diameter, torque capacity 1.96 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0812A

Model: EWC0812A

Low-load small one-way clutch with synthetic resin spring. For 8 mm shaft diameter, torque capacity is 1.18 N-m.

JTEKT Corporation

Small One-Way Clutch EWC1012A

Model: EWC1012A

Low-load small one-way clutch with synthetic resin spring. For 10 mm shaft diameter, torque capacity is 1.37 N-m.

JTEKT Corporation

Small One-Way Clutch 1WC0612

Model: 1WC0612

High-load small one-way clutch with metal spring. For shaft diameter 6 mm, torque capacity 0.88 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0608A

Model: EWC0608A

Small low-load one-way clutch with synthetic resin spring. For 6 mm shaft diameter, torque capacity is 0.25 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0809C

Model: EWC0809C

Small high-load one-way clutch with synthetic resin spring. For 8 mm shaft diameter, torque capacity 0.88 N-m.

JTEKT Corporation

Small One-Way Clutch 1WC0608

Model: 1WC0608

High-load small one-way clutch with metal spring. For shaft diameter 6 mm, torque capacity is 0.44 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0809A

Model: EWC0809A

Low-load, small one-way clutch with synthetic resin spring, for 8 mm shaft diameter. Torque capacity is 0.49 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0608C

Model: EWC0608C

High-load small one-way clutch with synthetic resin spring. For 6 mm shaft diameter, torque capacity is 0.44 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0608XA

Model: EWC0608XA

Low-load small one-way clutch with synthetic resin spring. For shaft diameter 6 mm, torque capacity is 0.25 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0406C

Model: EWC0406C

High-load small one-way clutch with synthetic resin spring. Suitable for 4 mm shaft diameter, with torque capacity of 0.15 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0608XC

Model: EWC0608XC

Compact high-load one-way clutch with synthetic resin spring. For shaft diameter 6 mm, torque capacity is 0.44 N-m.

JTEKT Corporation

Tapered Roller Bearing KESTA4895-1LFTUR4

Model: KESTA4895-1LFTUR4

Tapered roller bearing for axle drive pinion. Employs KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered roller bearing KETRD101004UR4

Model: KETRD101004UR4

Large tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Small One-Way Clutch EWC0406A

Model: EWC0406A

Low-load small one-way clutch with synthetic resin spring. For shaft diameter 4 mm, torque capacity is 0.08 N-m.

JTEKT Corporation

Small One-Way Clutch EWC0606XC

Model: EWC0606XC

High-load compact one-way clutch with synthetic resin spring. For shaft diameter 6 mm, torque capacity is 0.19 N-m.

JTEKT Corporation

Tapered Roller Bearing KESTN3580LFT

Model: KESTN3580LFT

Tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KEST4183YR1LFT

Model: KEST4183YR1LFT

Tapered roller bearing for automotive axle drive pinion. Incorporates KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KESTA3779LFT

Model: KESTA3779LFT

Tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KETRD091004UR4

Model: KETRD091004UR4

Large tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KESTJ4090LFT

Model: KESTJ4090LFT

Tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KEST4190LFTUR4

Model: KEST4190LFTUR4

Tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KEST3072CLFT

Model: KEST3072CLFT

Compact tapered roller bearing for axle drive pinion. Uses KE bearing technology to extend service life in contaminated oil, and adopts low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KESTD3368LFT

Model: KESTD3368LFT

Tapered roller bearing for axle drive pinion applications. Compact model featuring KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Tapered Roller Bearing KESTR3572LFTYR1

Model: KESTR3572LFTYR1

Tapered roller bearing for axle drive pinion. Adopts KE bearing technology and low torque specification (LFT).

JTEKT Corporation

Aircraft Airframe Bearings

A general term for airframe bearings used in various parts of business jets and commercial aircraft. Features an extensive lineup including bearings for flap and spoiler systems and door locks.

JTEKT Corporation

Bearings for Space Equipment

Bearings usable in space under high vacuum, a wide temperature range, and radiation environments. Combines materials technology and tribology technology.

JTEKT Corporation

Aircraft Landing Gear Bearing

Aircraft landing gear bearing that withstands rapid acceleration and impact loads during takeoff and landing. Interchangeable inner and outer rings allow easy maintenance.

JTEKT Corporation

3rd Generation Ball Hub Unit (for Driven Wheels)

A 3rd generation ball hub unit supporting driven wheels. Combines low torque design with mud water resistance and suits a wide range of vehicles from kei cars to SUVs.

JTEKT Corporation

3rd Generation Ball Hub Unit (for Drive Wheels)

A 3rd generation ball hub unit supporting drive wheels. Low-friction bearings and seals reduce friction loss by 65% compared with conventional products, contributing to improved EV electric efficiency.

JTEKT Corporation

Helicopter Transmission Bearing

A helicopter bearing that supports the gears transmitting engine power to various components. Offers high reliability and the ability to operate after loss of oil.

JTEKT Corporation

Slewing Ring Bearing

Design and manufacturing specification sheet for slewing ring bearings of types TH, DTH, THR, DTR, DTR-T, and 2TR. A form for requesting quotations and design by entering machine conditions.

JTEKT Corporation

Helicopter Swashplate Bearing

A large-diameter, thin-section, high-capacity bearing used in the swashplate section that controls the blade pitch angle.

JTEKT Corporation

Jet Engine Main Shaft Bearing

A highly reliable bearing supporting the main shaft of a jet engine. Uses high-temperature special steel and vacuum remelted steel to combine long service life with resistance to foreign matter contamination.

JTEKT Corporation

Bearing for Jet Engine Gearbox

A bearing for gearboxes that mount starters, pumps and other components. Maintains stable performance over long periods under high-temperature, high-speed conditions.

JTEKT Corporation

Bearing for Jet Engine Accessories

A bearing used in the rotating parts of engine accessories such as the afterburner section, PTO, and RDS. Can be used without lubrication in high-temperature environments.

JTEKT Corporation

SP/DTR-T Slewing Bearing (Circumferentially Split Type, External Teeth)

Circumferentially split slewing bearing with external teeth, inner diameter 2020 to 6457 mm. Available in 2-split and 4-split types, designed to improve assembly of large machines.

JTEKT Corporation

TH Series Slewing Ring Bearing (Single-Row Ball Type, Without Gear Teeth)

Single-row ball slewing ring bearing with bore diameter of 128 to 2830 mm. A bearing body without gear teeth, with mounting holes in the outer and inner rings.

JTEKT Corporation

TH Series Slewing Ring Bearing (Single-Row Ball Type, Internal Gear)

Internal-gear slewing ring bearing with bore diameter of 319.5 to 3510 mm. Equipped with gear teeth, it forms a slewing mechanism in combination with a drive pinion.

JTEKT Corporation

DTR-Type Slewing Ring Bearing (Triple-Row Combined Cylindrical Roller Type, Ungeared)

Triple-row combined cylindrical roller slewing ring bearing with bore diameter of 995 to 4385 mm. Ungeared bearing body for large machinery.

JTEKT Corporation

DTR-T Type Slewing Ring Bearing (for Tunnel Boring Machines, Internal Gear)

Internal gear slewing ring bearing with inner diameter of 1372 to 3996 mm. Three-row combined cylindrical roller structure designed for tunnel boring machines.

JTEKT Corporation

DTR-T Type Slewing Ring Bearing (for Tunnel Boring Machines, External Gear)

External gear slewing ring bearing with bore diameter of 1055 to 3450 mm. Three-row combined cylindrical roller structure for tunnel boring machines.

JTEKT Corporation

TH-Type Slewing Ring Bearing (Single-Row Ball, External Gear)

External-gear slewing ring bearing with an inner diameter of 115 to 2240 mm. Features a gear on the outer circumference for use in combination with a drive pinion.

JTEKT Corporation

Mud-Resistant Seal for Agricultural and Construction Machinery

Oil seal that reduces mud ingress and oil leakage through the addition of a side lip and sleeve, enhancing sealing performance in harsh environments.

JTEKT Corporation

Slewing Ring Bearing TH Type (Single-Row Ball Type)

A compact single-row ball slewing ring bearing that simultaneously supports axial load, radial load and moment with one unit. Commonly used in general construction and material handling machinery.

JTEKT Corporation

Slewing Bearing DTR Type (Three-Row Combined Cylindrical Roller Type)

Slewing bearing with a three-row combined cylindrical roller structure, offering high rigidity and high load rating. Used in cranes, ship loaders, large rotating equipment, and similar applications.

JTEKT Corporation

Slewing Bearing DTR-T Type (Three-Row Combined Cylindrical Roller Type, for Tunnel Boring Machines)

A slewing bearing with enhanced shock resistance, high rated load capacity, and high sealing performance, designed to support the main cutter of tunnel boring machines.

JTEKT Corporation