Machine Parts

Solid Needle Roller Bearing

Needle roller bearing with a high-rigidity, high-precision outer ring in a single-row structure. Available in a type that uses the shaft directly as the raceway without an inner ring, and a type with an inner ring.

NTN Corporation

Shell-Type Needle Roller Bearing

Needle roller bearing with cage and thin-walled outer ring (shell). Available in sealed type, heavy-load type, and inch-series variants.

NTN Corporation

Needle Roller Bearing with Thrust Ball Bearing

Model: NKX

A composite bearing combining needle rollers and a thrust ball bearing, capable of supporting light axial loads. Open-end type without cover.

NTN Corporation

Needle Roller Bearing with Thrust Ball Bearing (with Cover)

Model: NKX‥Z

A composite needle roller bearing with a cover added to the NKX, designed for light axial loads.

NTN Corporation

Bearee™ Resin Rolling Bearing (FL3307 Bearing)

A rolling bearing with inner and outer rings and cage made of resin materials offering corrosion resistance and self-lubricating properties. Suitable for environments where steel bearings cannot be used, such as underwater or in chemical solutions.

NTN Corporation

Bearee™ Resin Plain Bearing Unit (FL3700)

A unit incorporating Bearee FL3700 resin plain bearings. Can be used not only in air but also in water and chemical solutions, and operates without lubrication and maintenance-free.

NTN Corporation

Bearee™ Sliding Materials for Underwater (Chemical Solution) Use

A highly wear-resistant sliding material usable in water and chemical solutions. Has a track record of use in automotive electric water pumps and other applications.

NTN Corporation

Bearee™ Conductive (Antistatic) Sliding Products (FL3900・UH3954・AS5965)

A resin bearing material with low friction and low wear properties that also offers electrical conductivity. When used in areas requiring antistatic protection, it may eliminate the need for grounding devices.

NTN Corporation

Bearee™ FL9000 High Surface Pressure Sliding Sheet

Model: FL9000

A self-lubricating composite sliding material consisting of metal mesh coated with special fluororesin. It can be bonded to metal and used in low-speed, high surface pressure operation.

NTN Corporation

Bearee™ M Liner Bearing (ML Type)

Resin slit liner bearing with bore sizes from 4 mm to 70 mm. A plain bearing installed between shaft and housing, with recommended operating clearance dimensions shown.

NTN Corporation

Bearee™ Resin Sliding Screw (Miniature Resin Sliding Screw R-MSS)

A low-noise feed screw combining a Bearee AS5000 resin nut with a stainless rolled screw shaft. Available in nominal diameters from 4 mm to 12 mm.

NTN Corporation

Bearee™ Sliding Seal

A resin-based sliding seal with excellent sealing performance against gases and oils, along with wear resistance and low friction. Limiting PV and operating temperature vary by grade.

NTN Corporation

Boardtech Flat Head Screw 5×70

Model: 338049

Steel flat head tapping screw for flush fastening of wood and wood-based building materials. Half-thread type.

Japan Power Fastening Corporation

Bearry™ MLE Type MLE Bearing

Three-layer high-load bearing made by sintering bronze powder onto a steel backing plate and impregnating the porous layer with Bearry FL7023. Inner diameter 4–60 mm.

NTN Corporation

Bearye™ ML-Type M Liner Bearing

Thin-walled rolled bushing with FL3060 sheet material bonded to steel plate. Standardized bore diameters from 3 to 70 mm.

NTN Corporation

Bearee™ MSS Miniature Resin Sliding Screw

Low-noise miniature resin sliding screw combining an AS5000 nut with an SUS304 screw shaft. Nominal diameter 4–12 mm.

NTN Corporation

Bearee™ Resin Material Standard Products (Sheet, Rod, Pipe, Plate)

Standard products of Bearee™ material in sheet, rod, pipe, and plate forms.

NTN Corporation

Bearry™ ARE, AR, and ARF Type Sleeve Bearings

Resin sleeve bearings made with Bearry FL3000. ARE type has bore diameter 3 to 12 mm, AR type has bore diameter 15 to 50 mm, and ARF type is flanged with bore diameter 3 to 50 mm, all standardized. Supports radial load (ARF type also supports axial load).

NTN Corporation

Bearie™ BRF Series Flanged Sleeve Bearing

Flanged resin bearing injection-molded from Bearie AS5005. Standardized bore diameters of 3 to 25 mm, capable of supporting both radial and axial loads.

NTN Corporation

Bearee™ TW-Type Thrust Washer

Thrust washer machined from Bearee FL3000 sheet material. Standardized thickness of 0.8 mm and inner diameter of 6 to 50 mm.

NTN Corporation